 |
» |
|
|
|
Before starting UPDATE, reserve
contiguous disk space in the file AXLDEV1.PUB.SYS.
This amount is at least 60,000 sectors but may be larger. The prudent
way to reserve this space is in one contiguous block. Reserving
this space in more than one block introduces a risk that Secondary
Storage Manager (SSM) will allocate space for files on LDEV 1 in
a way that causes an "Out of contiguous disk space"
condition during UPDATE. Always
try to reserve this contiguous disk space for UPDATE
in one block. However, if you cannot reserve all the disk space in one file
on LDEV 1, the additional disk space required beyond 60,000 sectors
can be reserved in large contiguous sectors. The minimum size of
any contiguous sector piece must be 30,000 sectors.  |  |  |  |  | NOTE: Consult your HP Representative or the Response Center
before you use this method to allocate disk space. Your operating
system is at risk of LDEV1 overflow while running. Performance will
be impacted. The operating system requires room to work. If it does
not have enough, the resource manager will start to shut your system
down. |  |  |  |  |
To reserve disk space sectors in sections: For each section
of 60,000 to 30,000 sectors: :build axldev1 disk = 60000 :build axldev2 disk = 30000 :build axldevn disk = 30000 . . .
|
The minimum number of sectors for at least one section is
60,000. All other sections must be at least 30,000 sectors each. Purge each axldev file
you created. For example: :purge axldev1 :purge axldev2 :purge axldev3
|
During the UPDATE,
you will receive a disk space error message. Select OVERRIDE
at the disk space warning to continue with the process. WARNING: UPDATE tried to find 60,000 sectors of contiguous disk space on LDEV1 for its work, but it could only find nnnnnnn sectors. Before continuing, refer to the Installation Manual for instructions on collecting enough contiguous space on LDEV1 for the update. If you still have questions after attempting the procedures outlined in the manual, call your HP support representative for help. You may override this warning and continue with the update, but HEWLETT-PACKARD STRONGLY DISCOURAGES THIS COURSE OF ACTION. DO NOT override this warning unless you have a full backup available and the time to REINSTALL your system. If UPDATE runs out of space on LDEV1, you risk having to REINSTALL. Override this warning message [OVERRIDE/NO; default = NO]?
|
Return to the procedure you were working on and
continue with the instructions.
|