parmodify(1M)

NAME

parmodify — modify an existing partition

SYNOPSIS

parmodify -p PartitionNumber {-a cell: [celltype]:[use_on_next_boot]:[failure_usage][:clm_value] [-a cell: [celltype]: [use_on_next_boot]: [failure_usage] [:clm_value]]... |-m cell: [celltype]:[use_on_next_boot]:[failure_usage][:clm_value] [-m cell: [celltype]:[use_on_next_boot]:[failure_usage] [:clm_value]]... |-d cell [-d cell]... |-B |-r cell [-r cell]... |-T flag] |-u username: [passwd] -h IPaddress|hostname |-g [passwd] -h IPaddress|hostname |-I IPaddress |-b path |-t path |-s path |-P PartitionName |-k s_lock:p_lock }

DESCRIPTION

The parmodify command is used to modify the attributes of an existing partition. By default the target partition is the local partition. Either the -u or the -g option can be specified to allow this command to modify any other partition in the (local or remote) complex. This command can modify the following attributes:

Partition name

Cell assignment:

Add cells to the partition
Delete cells from the partition

Attributes of existing cells:

celltype
use_on_next_boot
failure_usage
clm_value (cell local memory)

Core cell choices

Primary boot path

HA Alternate boot path

Secondary boot path

Partition's IP address

By the nature of its operation, this command can modify the configuration of its target complex. Operation can be affected by the state of the target complex's nPartition Configuration Privilege. If the nPartition Configuration Privilege is unrestricted (the default), or the complex is accessed using the -g option, all operations are allowed. Otherwise any of the operations below causes the command to fail:

add cells to any partition in the complex
delete cells from any partition in the complex
modify the CLM parameters of any cell in the complex

The -g option is unaffected by the state of the nPartition Configuration Privilege. Note: The state of the nPartition Configuration Privilege can only be changed at the service processor's Command menu.

Root permission is required to run this command on the local partition. If the -u or -g option is used to access a remote partition or complex, root permission is not required on the local system, and the local system need not exist on an nPartition. If the -u option is specified, username on the remote host must have root permission or the command will fail.

Refer to the HP System Partitions Guide for a description of the partition management terms used in this man page. Refer to partition(5) for a list of partition management commands.

Options and Arguments

parmodify recognizes the following command line options and arguments:

-p PartitionNumber: Specifies the partition to be modified. PartitionNumber specifies the unique number (integer) assigned to the partition when it was created. Note: The partition which is specified to be modified is called the target partition. The partition in which the command is executing is called the local partition.

One or more of the following options must be specified with the -p option.

-u username:[passwd]

Specifies the required authorization to access a partition other than the local system (but can also be used as a loopback access to the local partition).

The -h option is required if this option is used.

username specifies a configured user name on the target partition.

passwd specifies the password associated with the username. If this field is empty, the command prompts for the password.

Note: This command is a Web-Based Enterprise Management (WBEM) Client Application. The -u option accesses the target partition using a Secure Sockets Layer (SSL) connection. If errors are reported, check that the conditions described in the DEPENDENCIES section are satisfied.

SECURITY WARNING: Specifying the password directly on the command line may pose a security risk in your environment. The ps or other related commands can be invoked in such a way as to display the command line of a process. In this situation, any authenticated user on the system can potentially see the password while the process is executing. Hence, it is highly recommended not to specify the password on the command line, and instead allow the command to prompt for the password.

Note: Specifying passwd on the command line will not be supported in future releases.

-h IPaddress|hostname

This option should only be used in combination with either the -u or -g option. IPaddress|hostname specifies the IP address or hostname of the target partition (-u) or complex (-g).

-g [passwd]

Allows access to the complex specified by the -h option. The accessed complex is then considered the target complex. Access is via the service processor's LAN port.

The -h option is required if this option is used.

passwd specifies the IPMI password of the service processor. If this field is omitted, the command prompts for the password.

If an error is reported when you attempt to connect using this option, check to see that IPMI LAN access has not been disabled on the remote service processor. Access to the complex via IPMI over LAN can be enabled or disabled by logging on to the service processor and using the SA command from the Command Menu.

The -u and -g options are mutually exclusive.

Note: Specifying passwd on the command line will not be supported in future releases.

-a cell:[celltype]:[use_on_next_boot]:[failure_usage][:clm_value]

Assigns the specified cell to the target partition. To assign multiple cells to the partition, multiple -a options should be used.

cell specifies the cell id. It can be specified either in the local (cabinet#/slot#) or global (cell#) format. For example, the cell located in cabinet 0, slot 1 is identified in the local format as 0/1 or in the global format as 1.

celltype specifies the type of the cell. The valid celltype value for cells is:

base: This is the default if celltype is not specified.

use_on_next_boot specifies whether the cell will participate in a reboot. The valid values for use_on_next_boot are:

y: participate in reboot. This is the default. However if the slot is missing or the cell does not exist or the cell is powered off then it defaults to n
n: do not participate in reboot.

failure_usage field is used by system firmware when a partition is booted. If a CPU selftest failure or a DIMM de-allocation occurs during the power-on self-test process then this flag is used by the system firmware to determine whether or not and how the cell should be integrated into the partition at boot time. The valid failure_usage value for cells is:

ri: reactivate with memory interleave. Specifies to integrate the cell as it would normally be integrated. This is the default.

clm_value specifies the amount of the memory that will be configured as local (non-interleaved) memory for the cell. The command issues a warning if the specified clm_value exceeds the total memory of the cell.

Note: On PA-RISC platforms, the amount of memory allocated for CLM may not match the amount of CLM requested due to some memory being reserved exclusively by the operating system.

If no clm_value is specified, maximum interleaved memory(no clm) is assumed for cells. The command will issue a warning if 100% CLM is specified for all the cells in the partition. The clm_value can be expressed in two forms:

As a percentage (ratio). The percent number can be any number in the range 0 - 100 with a suffix of "%". This number will be rounded up to 12.5%, 25%, 37.5%, 50%, 62.5%, 75%, 87% or 100%. If the cell contains less than 4GB memory, then the percentage will be rounded to 25%, 50%, 75% or 100%. The specified percentage is applied each time the partition boots, thus resulting in a different value if the working memory in the cell is different. For example, a cell in a partition has 8GB memory and the user specifies 4GB CLM. When the partition boots 4GB of that cell's memory will be used as CLM. Later the user shuts down the partition, adds another 8GB memory to that cell. When the partition is booted again, the cell now has 16GB of memory, so 8GB (50%) is allocated as CLM.
As an absolute number (default). This can also be optionally suffixed by "GB". The clm_value is interpreted as an absolute number of gigabytes of memory. Numbers other than integers and halves are rounded up to the nearest 0.5GB. For example: 2.5GB will not be rounded up. However 2.3GB will be rounded up to 2.5GB. For example, a cell in a partition has 8GB memory and the user specifies 50% CLM. When the partition boots 4GB of that cell's memory will be used as CLM. Later the user shuts down the partition, adds another 8GB memory to that cell. When the partition is booted again, the cell now has 16GB of memory, but the CLM is still 4GB.

-m cell:[celltype]:[use_on_next_boot]:[failure_usage][:clm_value]

Modify attributes of cell(s) already assigned to the target partition. Please refer to the explanation of the -a option for details of the different fields in this option argument. Note:

The use_on_next_boot field of the last cell containing core IO cannot be modified to n.
If modifying the CLM value of a cell in any partition other than the local partition, it is preferable to use the -u option.

-d cell

Delete the specified cell(s) from the partition. If the cell which is being deleted is an active cell then after the execution of the parmodify command the user must shutdown the partition using the shutdown -R command for the configuration change to take effect. If the -B option is also specified then the partition will boot up to the command prompt. If the -B option is not specified then the partition will have to be booted manually from the service processor. Deletion of inactive cells does not require a shutdown of the partition.

A cell can be specified either in the local (cabinet#/slot#) or global (cell#) format. For example, the cell located in cabinet 0, slot 1 is identified in the local format as 0/1 or in the global format as 1.

-B

Specifies to reboot the partition now. The default is not to boot. If this option is specified and the partition to be modified is not the local partition, then the command proceeds only if the specified partition is not active. Also this option is useful only if the -a option or the -d option or a clm_value has been specified.

-r cell

Specifies the core cell choices. A core cell choice is a configured cell which has attached core IO. If the core cell of a partition is deleted then the firmware will select the first core cell choice as the next core cell. One to four core cell choices can be specified. The first cell specified is the first core cell choice, the second cell specified is the second core cell choice, the third cell specified is the third core cell choice and the fourth cell specified is the fourth core cell choice. Use of this option will override previous core cell choices. So, if the order of a given cell is changing, all of the core cell choices should be specified in the new order.

-I IPaddress

Specifies the IP address that should be used by management tools such as parmgr to address the target partition. This value must be consistent with the IP address that is assigned to the partition once HP-UX is installed and networking is configured.

-b path

Specifies the primary boot path. path specifies a physical hardware path. Note: On Itanium-based platforms, only boot paths of the local partition can be modified.

-t path

Specifies the alternate boot path. path specifies a physical hardware path. Note: On Itanium-based platforms, only boot paths of the local partition can be modified.

-s path

Specifies the secondary boot path. path specifies a physical hardware path. Note: On Itanium-based platforms, only boot paths of the local partition can be modified.

-T flag

Specifies that whether Hyper-Threading should be enabled or not (only if cell support this feature). If this option is not specified, Hyper-Threading property will not be changed. The valid values for flag are:

y: enables Hyper-Threading, which allows multiple threads to run concurrently on each CPU.
n: disables Hyper-Threading.

-P Partition Name

Specifies the name of the partition. The characters which can appear in a valid partition name are a-z, A-Z, 0-9, - (dash), _ (underscore), " " (space) and . (period). If the partition name includes space then the name should be enclosed within double quotes. The partition name can have a maximum of 64 characters.

-k s_lock:p_lock

Specifies the lock keys provided by parmgr for the Stable Complex Configuration Data and Partition Configuration Data. The lock keys should always be specified in pairs. If either lock key is not available -1 should be specified as a placeholder. For example: if the s_lock is available but the p_lock is not available, then it should be specified as -k s_lock:-1.

Note: The -k option is intended for use by system management tools which invoke the parmodify command programmatically. Command line users should avoid this option.

Mapping of Global Cell Numbers to Local Cell Numbers

The cabinets in a complex are numbered starting from 0. The cell slots in each cabinet are also numbered starting from 0. Each cabinet can have a maximum of 8 cells. For example, the cells located in cabinet 0 will have the following cell numbers in global format: 0, 1, 2, 3, 4, 5, 6, 7. The cell numbers in corresponding local format will be 0/0, 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7.

Similarly the cells located in cabinet 1 will have the following cell numbers in global format: 8, 9, 10, 11, 12, 13, 14, 15. The cell numbers in corresponding local format will be 1/0, 1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/7.

From the above convention the cell located in cabinet 1, slot 0 is identified in the local format as 1/0 or in the global format as 8. The parstatus command will display the above cell as "cab1,cell0". The cell located in cabinet 1, slot 4 is identified in the local format as 1/4 or in the global format as 12. The parstatus command will display the above cell as "cab1,cell4". See parstatus(1).

RETURN VALUE

The parmodify command exits with one of the following values:

0: Successful completion.
1: Error condition occurred.

EXAMPLES

Add a new cell in cabinet 0 slot 5 to the existing Partition 2 and activate it.

parmodify -p 2 -a 0/5:base:y:ri:50% -B 

Delete a cell in cabinet 0 slot 5 from the existing Partition 2.

parmodify -p 2 -d 5  

WARNINGS

On a partition whose hardware resources are managed under an instant Capacity On Demand (iCOD) license, the parmodify command fails if a configuration change would take the partition out of compliance.

Examples of such actions include:

Assigning an iCOD cell to a partition, specifying "y" for the cell's use_on_next_boot field.
Changing an iCOD cell's use_on_next_boot field to "y" after assigning it to a partition.
Assigning a cell containing iCOD-licensed CPUs to a partition that is not running, or that does not have the iCOD software installed.

For more information about actions that are restricted on iCOD partitions, refer to the iCOD User's Guide located at /usr/share/doc/icodUserGuide.pdf.

HP-UX 11i Version 2 is the last HP-UX release on which passing passwd for the -u and -g options is supported. Specifying passwd on the command line will not be supported in future releases. The command will prompt for the password.

DEPENDENCIES

This command uses the Web-Based Enterprise Management (WBEM) product and certain of its configuration settings. If you encounter connection errors when using the -u option, check that the following two conditions are satisfied:

Use the cimconfig command (see cimconfig(1M) in the WBEM product documentation) to verify (and correct if necessary) the setting of the following two variables:
- enableRemotePrivilegedUserAccess=true
- enableHttpsConnection=true
You must have appended the target partition's digital certificate to the local partition's Trust Store file. For the nPartition commands, the Trust Store file is /var/opt/wbem/client.pem.
Note: You must have appended the target partition's digital certificate to the local partition's Trust Store file. For the npartition commands, the Trust Store file is /var/opt/wbem/client.pem. This file is used by the commands that come with WBEM installation. Hence, if the commands that come with the WBEM installation trust a target partition, then npartition commands will also trust the target partition.

Refer to the WBEM documents specified in the SEE ALSO section below for further information.

AUTHOR

parmodify was developed by the Hewlett-Packard Company.