 |
» |
|
|
|
Symbols- /dev, How Device Files Are Handled By MUXes and DTC Terminal Servers
- /dev/pty, Managing Outgoing Dedicated Ports With dpp and ocd
- /dev/ptym, Managing Outgoing Dedicated Ports With dpp and ocd
- /dev/telnet, DDFA File Directories and Setup
- /etc/ddfa/dp, DDFA Master Files, The Dedicated Port File, dp, Setting Up Printers with the HP-UX Spooler
- /etc/ddfa/pcf, The Port Configuration File, pcf
- /etc/rc.config.d/netdaemons
file, Managing Outgoing Dedicated Ports With dpp and ocd
- /usr/contrib/bin/ddfa_device_mig, DDFA File Directories and Setup
- /usr/examples/ddfa/dp, DDFA File Directories and Setup
- /usr/examples/ddfa/pcf, DDFA File Directories and Setup, DDFA Master Files, The Port Configuration File, pcf
- /usr/lbin/telnetd, DDFA File Directories and Setup
- /usr/sbin/dpp, DDFA File Directories and Setup, DDFA Master Files
- /usr/sbin/ocd, DDFA File Directories and Setup, DDFA Master Files, Managing Outgoing Dedicated Ports With dpp and ocd
- /usr/sbin/ocdebug, DDFA File Directories and Setup, DDFA Master Files
- /usr/share/man/man1m/ocd.1m, DDFA File Directories and Setup
- /usr/share/man/man1m/ocdebug.1m, DDFA File Directories and Setup
- /usr/share/man/man4/dp.4, DDFA File Directories and Setup
- /usr/share/man/man4/pcf.4, DDFA File Directories and Setup
- /usr/share/man/man7/ddfa.7, DDFA File Directories and Setup
- /var/adm/ocdpid>, DDFA Master Files
- /var/adm/syslog/syslog.log, The Port Configuration File, pcf
C- call
- close(), Accessing DTC or non-DTC Ports Programmatically
- ioctl(), Accessing DTC or non-DTC Ports Programmatically
- open(), Accessing DTC or non-DTC Ports Programmatically
- read(), Accessing DTC or non-DTC Ports Programmatically
- write(), Accessing DTC or non-DTC Ports Programmatically
- close, Intended Audience, Overview of DDFA And Telnet Port Identification, DDFA Master Files
- close call, The Port Configuration File, pcf, Accessing DTC or non-DTC Ports Programmatically
- close_timer, The Port Configuration File, pcf
- commands
- HP-UX, Setting Up Printers with the HP-UX Spooler
- tty, Setting Up Outgoing and Incoming Connections
- what, Troubleshooting Incoming Connections
- commands, HP-UX
- disable, Setting Up Printers with the HP-UX Spooler
- enable, Setting Up Printers with the HP-UX Spooler
- insf, Managing Outgoing Dedicated Ports With dpp and ocd
- kill, Preparing to Use dpp
- lpadmin, Setting Up Printers with the HP-UX Spooler
- mknod, How Device Files Are Handled By MUXes and DTC Terminal Servers
- ps, Managing Outgoing Dedicated Ports With dpp and ocd
- commands, HP-UX , insf, How Device Files Are Handled By MUXes and DTC Terminal Servers
- configuration
examples, Application Examples
- configure
dedicated port files, DDFA File Directories and Setup
- configuring
board, DDFA File Directories and Setup
- Configuring Incoming
Connections for CSLIP/SLIP, Configuring Incoming Connections for CSLIP/SLIP
- configuring
ports, DDFA File Directories and Setup
- connection retries, The Port Configuration File, pcf
- connections
- incoming
Telnet, Managing Incoming Connections by telnetd
- outgoing, Setting Up Outgoing and Incoming Connections, Troubleshooting Outgoing Connections
- CSLIP, Configuring Incoming Connections for CSLIP/SLIP
- CSLIP
connections over DTCs, Application Examples
D- daemon, DDFA Master Files
- data transfer, The Port Configuration File, pcf
- Datacommunications
and Terminal Controller (DTC), Introduction
- DDFA, DDFA Master Files
- DDFA configuration tasks, DDFA Configuration Tasks
- DDFA file directories, DDFA File Directories and Setup
- DDFA filesets, DDFA File Directories and Setup
- DDFA installation and migration, DDFA File Directories and Setup
- ddfa manual reference
page, Accessing DTC or non-DTC Ports Programmatically
- DDFA migration, DDFA File Directories and Setup
- DDFA
Utilities, The Dedicated Port File, dp, Application Examples
- dedicated
port, How Telnet Port Identification Works
- Dedicated Port configuration
file, DDFA Master Files
- dedicated port configuration
file, Managing Outgoing Dedicated Ports With dpp and ocd
- dedicated port file, The Dedicated Port File, dp
- dedicated port file
(dp), How Telnet Port Identification Works
- dedicated port files
- configuration, DDFA File Directories and Setup
- Dedicated Port Parser, DDFA Master Files, Starting Up the ocd Daemons
- dedicated
port parser, Managing Outgoing Dedicated Ports With dpp and ocd
- dedicated ptys, Troubleshooting Incoming Connections
- dedicated server port, The Dedicated Port File, dp
- default port configuration
file, The Port Configuration File, pcf
- device file
- removing, Managing Outgoing Dedicated Ports With dpp and ocd
- device file names, How Device Files Are Handled By MUXes and DTC Terminal Servers
- device files, Introduction
- disable, Setting Up Printers with the HP-UX Spooler
- dp, DDFA Master Files, Defining and Executing DDFA Parameters, The Dedicated Port File, dp
- dp
(dedicated port file), How Telnet Port Identification Works
- dp file, The Port Configuration File, pcf, Managing Incoming Connections by telnetd, Accessing DTC or non-DTC Ports Programmatically, Troubleshooting Incoming Connections
- killing and restarting ocds, Using dpp to Kill and Restart ocd processes
- removing
existing ocds, Using dpp to Remove Existing ocd processes
- starting
the ocds, Preparing to Use dpp
- starting
up new ocds, Using dpp to Start Up New ocd processes
- updating
Telnet Port Identification Info, Using dpp to Update Telnet Port Identification Info
- dpp, Defining and Executing DDFA Parameters
- syntax, Managing Outgoing Dedicated Ports With dpp and ocd
- dpp -k
option, Using dpp to Kill and Restart ocd processes
- dpp outgoing connections, Troubleshooting Outgoing Connections
- dpp process binary file, Using dpp to Update Telnet Port Identification Info
- dpp|, DDFA Master Files
- DTC, Supported Configurations, How Device Files Are Handled By MUXes and DTC Terminal Servers
- DTC 16, Supported Configurations
- DTC 16MX, Supported Configurations
- DTC 16RX, Supported Configurations
- DTC 16TN, Supported Configurations
- DTC 48, Supported Configurations
- DTC 72MX, Supported Configurations
- DTC
board, The Dedicated Port File, dp
- DTC board number, Configuring Outgoing Connections (Printers)
- DTC
input device, Configuring Incoming Connections (Terminals)
- DTC
Manager, Troubleshooting Incoming Connections
- version, Troubleshooting Incoming Connections
- DTC manager, DDFA File Directories and Setup
- DTC Manager/UX, Prerequisites
- DTC Node Name, Configuring Outgoing Connections (Printers), The Dedicated Port File, dp
- DTC
port, How DDFA Utilities Work, Configuring Outgoing Connections (Printers), The Dedicated Port File, dp
- DTC
port number, Configuring Outgoing Connections (Printers)
H- HP 2340A, Supported Configurations
- HP 2345A, Supported Configurations
- HP 2360A, Supported Configurations
- HP 2363A, Supported Configurations
- HP 2364A, Supported Configurations
- HP 2370A, Supported Configurations
- HP 3000 systems, Supported Configurations
- HP
9000 ARPA, Introduction
- HP 9000
Internet Services, Introduction
- HP 9000 Series 700, Supported Configurations
- HP 9000 Series 800, Supported Configurations
- HP 9000 systems, Supported Configurations
- HP
D2355A, Prerequisites
- HP
J2120A, Prerequisites
- HP-UX, Setting Up Outgoing and Incoming Connections
- HP-UX command
- what, Troubleshooting Incoming Connections
- HP-UX commands, Setting Up Printers with the HP-UX Spooler
- disable, Setting Up Printers with the HP-UX Spooler
- enable, Setting Up Printers with the HP-UX Spooler
- lpadmin, Setting Up Printers with the HP-UX Spooler
- rm, Preparing to Use dpp
- who, Setting Up Outgoing and Incoming Connections
- HP-UX
operating system version, Supported Configurations
- HP-UX spooler, Configuring Outgoing Connections (Printers), Setting Up Printers with the HP-UX Spooler
- setting up printers, Setting Up Printers with the HP-UX Spooler
I- Incoming Connections, Configuring Incoming Connections for CSLIP/SLIP
- incoming connections, How DDFA Utilities Work, The Dedicated Port File, dp
- managing, Managing Incoming Connections by telnetd
- troubleshooting, Troubleshooting Incoming Connections
- Incoming Connections over DTCs, Configuring Incoming Connections for CSLIP/SLIP
- incoming
Telnet connections, Managing Incoming Connections by telnetd
- incomng connections, Setting Up Outgoing and Incoming Connections
- INETSVCS-DTC, DDFA File Directories and Setup
- INETSVCS-MAN, DDFA File Directories and Setup
- INETSVCS-RUN fileset, DDFA File Directories and Setup
- insf command, How Device Files Are Handled By MUXes and DTC Terminal Servers, Managing Outgoing Dedicated Ports With dpp and ocd
- installation
and migration, DDFA, DDFA File Directories and Setup
- Internet Services Telnet
daemon, How Telnet Port Identification Works
- ioctl, Overview of DDFA And Telnet Port Identification, Accessing DTC or non-DTC Ports Programmatically
- ioctl() call, Accessing DTC or non-DTC Ports Programmatically
- IP
address, The Dedicated Port File, dp
- IP address
of the DTC, Configuring Outgoing Connections (Printers)
- IP address
of the non- DTC server, Configuring Outgoing Connections (Printers)
M- managing incoming connections, Managing Incoming Connections by telnetd
- master pcf file, The Port Configuration File, pcf
- master template, DDFA Configuration Tasks
- mknod command, How Device Files Are Handled By MUXes and DTC Terminal Servers
- modem
signal control, Accessing DTC or non-DTC Ports Programmatically
- modems supported, Supported Configurations
- MUX, Prerequisites
- MUX device, Setting Up Outgoing and Incoming Connections
- MUX port, How Device Files Are Handled By MUXes and DTC Terminal Servers, Setting Up Outgoing and Incoming Connections
- MUX-based
printers, Setting Up Printers with the HP-UX Spooler
- MUX-connected
printer, Configuring Outgoing Connections (Printers)
- MUX-connected terminal, Setting Up Outgoing and Incoming Connections
O- ocd, Managing Outgoing Dedicated Ports With dpp and ocd
- ocd (outgoing connection daemon), The Port Configuration File, pcf
- ocd process, The Port Configuration File, pcf, Managing Outgoing Dedicated Ports With dpp and ocd, Setting Up Printers with the HP-UX Spooler, Accessing DTC or non-DTC Ports Programmatically
- ocdebug, DDFA Master Files
- open, Intended Audience, Overview of DDFA And Telnet Port Identification, DDFA Master Files
- open() call, Accessing DTC or non-DTC Ports Programmatically
- open_timer, The Port Configuration File, pcf
- open_tries, The Port Configuration File, pcf
- OpenView
DTC Manager, Prerequisites
- Outbound
Connection Daemon, DDFA Master Files
- Outbound Connection
Daemon in debug mode, DDFA Master Files
- outgoing connection, Setting Up Outgoing and Incoming Connections
- outgoing connection daemon
(ocd), The Port Configuration File, pcf, Managing Outgoing Dedicated Ports With dpp and ocd
- outgoing
connections, How DDFA Utilities Work, Setting Up Outgoing and Incoming Connections, The Dedicated Port File, dp, The Port Configuration File, pcf, Troubleshooting Outgoing Connections
- outgoing dedicated port, Managing Outgoing Dedicated Ports With dpp and ocd
- outgoing
dedicated ports, Accessing DTC or non-DTC Ports Programmatically
- outgoing
Telnet connection, Managing Outgoing Dedicated Ports With dpp and ocd
P- parity checking, Accessing DTC or non-DTC Ports Programmatically
- pcf, DDFA Master Files, Defining and Executing DDFA Parameters
- pid, DDFA Master Files, Preparing to Use dpp
- plotters
supported, Supported Configurations
- pool of free ptys, Setting Up Outgoing and Incoming Connections
- pool
of ptys, How Device Files Are Handled By MUXes and DTC Terminal Servers
- port
configuration, The Dedicated Port File, dp
- Port Configuration File, DDFA Master Files, DDFA Configuration Tasks
- port configuration file, Troubleshooting Incoming Connections
- port
identification, Managing Incoming Connections by telnetd
- port information, Troubleshooting Incoming Connections
- port
number, The Dedicated Port File, dp
- port
TCP address, The Dedicated Port File, dp
- pre-defined pty names, How Telnet Port Identification Works
- printer spooler attached to
DTCs, Overview of DDFA And Telnet Port Identification
- printer spooler attached
to terminal servers, Overview of DDFA And Telnet Port Identification
- printers supported, Supported Configurations
- process identification
number, DDFA Master Files, Preparing to Use dpp
- programmatic
access to DTC ports, Accessing DTC or non-DTC Ports Programmatically
- programmers, Using Dedicated Ports
- programs, Accessing DTC or non-DTC Ports Programmatically
- ps command, Managing Outgoing Dedicated Ports With dpp and ocd
- pseudonym, DDFA Master Files, The Dedicated Port File, dp
- pseudoterminal, Introduction
- pseudoterminal device
driver (pty), How Device Files Are Handled By MUXes and DTC Terminal Servers
- pseudoterminals, Prerequisites
- pty, Introduction
- pty
assignments, How Device Files Are Handled By MUXes and DTC Terminal Servers
- pty device file, How Telnet Port Identification Works
- pty device file names, How Device Files Are Handled By MUXes and DTC Terminal Servers
- pty
names, Using Dedicated Ports
- pty pool, DDFA Master Files
R- read, Intended Audience, Overview of DDFA And Telnet Port Identification, DDFA Master Files
- READ
ME FIRST files, DDFA Configuration Tasks
- read() call, Accessing DTC or non-DTC Ports Programmatically
- read(), write(), Accessing DTC or non-DTC Ports Programmatically
- related HP documentation, Related HP Documentation
- remove
the device files, Preparing to Use dpp
- removing device file, Managing Outgoing Dedicated Ports With dpp and ocd
- removing the device file, Preparing to Use dpp
- rm, Preparing to Use dpp
- root, DDFA Configuration Tasks
S- SAM, Setting Up Printers with the HP-UX Spooler
- SAM
(System Administration Management tool), Overview of DDFA And Telnet Port Identification
- server port, The Dedicated Port File, dp
- setting
up printers, Setting Up Printers with the HP-UX Spooler
- SIGUSR2 signal, The Port Configuration File, pcf
- slave side of the pty, Managing Outgoing Dedicated Ports With dpp and ocd
- SLIP, Configuring Incoming Connections for CSLIP/SLIP
- SLIP connections over DTCs, Application Examples
- standard
HP-UX input/output calls, Intended Audience
- standard
HP-UX system calls, Overview of DDFA And Telnet Port Identification
- standard spooler model scripts, Overview of DDFA And Telnet Port Identification
- starting ocd daemons, Starting Up the ocd Daemons
- status
request, The Port Configuration File, pcf
- status_request, The Port Configuration File, pcf
- status_timer, The Port Configuration File, pcf
- stopping the DDFA Utilities, Preparing to Use dpp
- superuser, DDFA Configuration Tasks
- supported configurations, Supported Configurations
- syntax for dpp, Managing Outgoing Dedicated Ports With dpp and ocd
- System Administration
Management tool (SAM), Overview of DDFA And Telnet Port Identification
- system administrator, Intended Audience, How DDFA Utilities Work, How Device Files Are Handled By MUXes and DTC Terminal Servers, Setting Up Printers with the HP-UX Spooler
- system operator, Intended Audience
- system variable
DDFA, Managing Outgoing Dedicated Ports With dpp and ocd
T- TCP timeouts, The Port Configuration File, pcf
- tcp_nodelay, The Port Configuration File, pcf
- Telnet, How Device Files Are Handled By MUXes and DTC Terminal Servers
- Telnet connection, How DDFA Utilities Work, The Dedicated Port File, dp
- Telnet daemon, How Telnet Port Identification Works, The Dedicated Port File, dp, Managing Incoming Connections by telnetd, Troubleshooting Incoming Connections
- Telnet daemon (, Setting Up Outgoing and Incoming Connections
- Telnet extension, Supported Configurations
- Telnet
Port Identification, How Telnet Port Identification Works
- Telnet
protocol, The Port Configuration File, pcf
- Telnet
service, Supported Configurations
- Telnet timing mark negotiation, The Port Configuration File, pcf
- telnet_mode, The Port Configuration File, pcf
- telnet_timer, The Port Configuration File, pcf
- telnetd, Managing Incoming Connections by telnetd, Troubleshooting Incoming Connections
- terminal
input/output, Accessing DTC or non-DTC Ports Programmatically
- terminal server output device, Configuring Outgoing Connections (Printers)
- terminal
server port, How DDFA Utilities Work
- terminal
server ports, Defining and Executing DDFA Parameters
- terminals supported, Supported Configurations
- TERMIO data
structure, The Port Configuration File, pcf
- TERMIO
limitations, Accessing DTC or non-DTC Ports Programmatically
- termio
manual reference page, Accessing DTC or non-DTC Ports Programmatically
- TERMIO restrictions, Accessing DTC or non-DTC Ports Programmatically
- TERMIO structure, Accessing DTC or non-DTC Ports Programmatically
- timeout, The Port Configuration File, pcf
- timing
mark negotiation, The Port Configuration File, pcf
- timing_mark, The Port Configuration File, pcf
- troubleshooting incoming connections, Troubleshooting Incoming Connections
- troubleshooting outgoing connections, Troubleshooting Outgoing Connections
- tty command, Setting Up Outgoing and Incoming Connections
- tty device file, Setting Up Outgoing and Incoming Connections
- tty devices, How DDFA Utilities Work
- tty name, Overview of DDFA And Telnet Port Identification
|