HP 3000 Manuals HP 3000 Manuals
To remove preconfigured LDEVs from the operating system
Follow these procedures only if you have not purchased any external disk
drives.
1. At the system prompt (:), type:
:HELLO MANAGER.SYS;HIPRI Return
2. To get into the SYSGEN utility, type the following:
:sysgen confg9x8 Return
A screen similar to the following should appear:
____________________________________________________________________________
| |
| |
| SYSGEN version E.00.00: catalog version E.00.00 TUE, SEP 28, 1993, |
| Copyright 1987 Hewlett-Packard Co. All Rights Reserved. |
| |
| **warning** no NMCONFIG file in this configuration. |
| **warning** NMCONFIG.PUB.SYS is now the NMCONFIG file |
| |
| |
| ** First level command ** |
| |
| io log (lo) misc (mi) spu (sp) |
| sysfile (sy) |
| |
| basegroup (ba) keep(ke) permyes (pe) show (sh) |
| tape (ta) |
| |
| clear (cl)(c) exit (ex)(e) help (he)(h) oclose (oc) |
| redo |
| |
| sysgen> |
| |
| |
____________________________________________________________________________
3. To see how your system is currently configured, type IO at the
prompt.
sysgen> io Return
A screen similar to the following should appear:
________________________________________________________________________
| |
| |
| ** IO configuration commands ** |
| |
| aclass (ac) adev (ad) apath (ap) avol (av) |
| dclass (dc) ddev (dd) dpath (dp) dvol (dv) |
| lclass (lc) ldev (ld) lpath (lp) lvol (lv) |
| maddress(ma) mclass (mc) mdev (md) mpath |
| (mp) |
| mvol (mv) |
| |
| clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho) |
| oclose (oc) redo |
| |
________________________________________________________________________
4. To get a device listing, type LD at the prompt.
io> ld Return
A listing similar to the following should appear:
____________________________________________________________________________
| |
| |
| LDEV: 1 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: D |
| PATH: 56/52.6.0 MPETYPE: 4 MPESUBTYPE |
| CLASS: DISC SPOOL |
| |
| LDEV: 2 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: D |
| PATH: 56/52.5.0 MPETYPE: 4 MPESUBTYPE |
| CLASS: DISC SPOOL |
| |
| LDEV: 3 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: D |
| PATH: 56/52.4.0 MPETYPE: 4 MPESUBTYPE |
| CLASS: DISC SPOOL |
| |
| LDEV: 4 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: DISC |
| PATH: 56/52.3.0 MPETYPE: 4 MPESUBTYPE: 2 |
| CLASS: DISC SPOOL |
| |
| LDEV: 6 DEVNAME: OUTDEV: 0 MODE: |
| ID: HP2567B RSIZE: 66 DEVTYPE: LP |
| PATH: 56/52.8.0 MPETYPE: 32 MPESUBTYPE: 9 |
| CLASS: LP LP1 |
| |
| LDEV: 7 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC1503B RSIZE: 128 DEVTYPE: TAPE |
| PATH: 56/52.0.0 MPETYPE: 24 MPESUBTYPE: 7 |
| CLASS: TAPE DDUMP TAPE1 |
| . |
| . |
| . |
| |
| |
____________________________________________________________________________
5. To delete LDEV 3 and LDEV 4 from the configuration, type the
following at the IO> prompt:
io> dd 3 Return
io> dd 4 Return
6. To check to see if these devices have been removed type the
following at the IO> prompt:
io> ld Return
A screen similar to the following should appear:
_____________________________________________________________________________
| |
| |
| LDEV: 1 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: DISC |
| PATH: 56/52.6.0 MPETYPE: 4 MPESUBTYPE: 2 |
| CLASS: DISC SPOOL |
| |
| LDEV: 2 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC2474S RSIZE: 128 DEVTYPE: DISC |
| PATH: 56/52.5.0 MPETYPE: 4 MPESUBTYPE: 2 |
| |
| CLASS: DISC SPOOL |
| |
| LDEV: 6 DEVNAME: OUTDEV: 0 MODE: |
| ID: HP2567B RSIZE: 66 DEVTYPE: LP |
| PATH: 56/52.8.0 MPETYPE: 32 MPESUBTYPE: 9 |
| CLASS: LP LP1 |
| |
| LDEV: 7 DEVNAME: OUTDEV: 0 MODE: |
| ID: HPC1503B RSIZE: 128 DEVTYPE: TAPE |
| PATH: 56/52.0.0 MPETYPE: 24 MPESUBTYPE: 7 |
| CLASS: TAPE DDUMP TAPE1 |
| . |
| . |
| . |
| |
_____________________________________________________________________________
7. To keep your configuration changes type the following at the IO>
prompt:
:SYSGEN config Return
io> hold Return
io> exit Return
sysgen> keep config Return
Purge old configuration (YES/NO)? YES Return
Keep configuration anyway (YES/NO)? YES Return
8. When you start (boot up) the system next time, you need only type
the START NORECOVERY command at the ISL prompt.
9. To return to the system prompt (:), when the sysgen> prompt
reappears, type:
sysgen> EXIT Return
: