HP 3000 Manuals HP 3000 Manuals
Hardware and Software Requirements
You need the following hardware and software to install and run HP CD
extensions:
* An HP 3000 with one or more CD-ROM drives
The CD-ROM drive must be a Toshiba XM-3401TX or equivalent, such
as:
* HP C3560U CD-ROM SCSI expansion upgrade kit
* HP A3086A CD-ROM for integrated 9x7 SPUs
* HP A1999A external SCSI CD-ROM drive (supported but no
longer available for purchase)
* HP 3000 9x7 or better wtih 32 MB RAM
* MPE/iX 5.0 configured for TCP/IP
* A 386 PC or higher
* 52 KB of conventional memory required for the HP CD extensions
TSRs (Terminate-and-Stay-Resident programs)
* DOS 5.0 or 6.0
* Microsoft CD-ROM Extensions 2.22 (included with the HP CD
extensions client software and with DOS 6.0)
* One of the following network environments:
* LAN Manager 2.1 or 2.2 with TCP/IP
* HP PC/Arpa NS C.00.00
* Novell NetWare version 3.11 or 4.0 with HP PC/Arpa NS
C.00.00 or WRQ Connection 3000 Version 2.01
* A CD-ROM disk formatted to the ISO-9660 or High Sierra Group (HSG)
specifications
* HP CD extensions client software (P/N B3683AA)
If you are running HP LaserROM for Microsoft Windows, you will also need
Microsoft Windows 3.1 and at least 4 MB of memory.
NOTE HP CD extensions do not work with Windows Sockets (WINSOCK),
because MSCDEX and the HP CD extensions device driver must be
loaded before Microsoft Windows.