HP 3000 Manuals HP 3000 Manuals
PDSERVER
The PDSERVER process can terminate for several reasons. The following
table lists the various error numbers and qualifier types that can occur.
For a complete description of the errors of the Buffer, Port, NETIPC, and
VT types, refer to the NS3000/iX manuals.
For a complete description of the errors of the CI (Command Interpreter)
type, refer to the appropriate MPE manual.
Error Error Log Qualifier
Number Type Type
1 ErrBufSpaceCreate Log Internal Buffer Error
2 ErrHeaderAllocate Log Internal Buffer Error
3 ErrLogBufAllocate Log Internal Buffer Error
6 ErrPortMsgAllocate Log Resource Buffer Error
7 ErrWaitEntryAllocate Log Resource Buffer Error
12 ErrPortDictAdd Log Internal Port Error
13 ErrGetPortAft Log Resource
14 ErrCreatePort Log Resource Port Error
15 ErrGetPortDst Log Resource Port Dst Err
19 ErrCmpEntryNotFound Log Internal
20 ErrIowait Log IPC NETIPC Error
26 ErrPdserverFunction Log Internal Function No
28 ErrSocketShutdown Log IPC NETIPC Error
34 ErrIPCget Log IPC NETIPC Error
35 ErrIPCrecv Log IPC NETIPC Error
37 ErrIPCsend Log IPC NETIPC Error
38 ErrListAllocate Log Resource Buffer Error
39 ErrNoGetNullTerm Log Resource VT Error No
40 ErrNoCreateSession Log Resource CI Error No
41 ErrNoJobInfo Log Resource JOBINFO Err
42 ErrNoAdoptUserSess Log Resource ADOPT CCODE
43 ErrNoAbortSession Log Resource ABORTSESS Er
44 ErrNoAdoptDsdad Log Resource ADOPT CCODE
A sample NMDUMP output of a PC aborting a host connection is shown below.
NMDUMP output of data file: nmlg0047.pub.sys
Time of output: MON, JUN 16, 1988, 9:00 AM
Subsystems being formatted: 6
**********************************************************
* FRI, JUN 6, 1988, 6:39 AM NS/3000(6) *
*--------------------------- Info Section ---------------*
* Log Class : NetIPC ERROR *
* Service : undefined (100) Error : 20 *
* Job/Session # : #S247 PIN :257 *
* Socket error : 64 *
* Error info. : 8 *
* Qualifying Error Description : *
* REMOTE ABORTED THE CONNECTION. *
* Info Section (hex): *
* 0000: 0005 0064 0014 40F7 0101 0002 0040 0008 *
**********************************************************
The Error field contains error number 20. The table above shows that
Error 20 is an Iowait error and that it is of the NETIPC ERROR type. The
Socket error field contains the number 64. Refer to the NS3000/iX
manuals. Find Error 64 REMOTE ABORTED THE CONNECTION (SOCKERR 64).
Perform the specified corrective action.
A sample console log of the same error is shown below.
*NS/3000 NetIPC ERROR IN(module=100);JOB:#S91;PIN:29;Info:8
- Error: 20
- Socket error : 64; REMOTE ABORTED THE CONNECTION.
"Error: 20" refers to the list of PDSERVER errors. "64; REMOTE ABORTED
THE CONNECTION" refers to the NetIPC error number and message. Find the
error in the NS3000/iX manuals and perform the specified corrective
action.
A console log of an invalid configured log is shown below.
** NS/3000 RESOURCE ERROR IN (module=100);Job:0;PIN:411
- Error: 40
- Miscellaneous : 1424
"Error: 40" refers to the list of PDSERVER errors, which shows that
Error 40 is a NoCreateSession error of the CI type. The error occurred
when a session was being created.
"Miscellaneous : 1424" refers to the MPE error number. Look for error
1424 in the MPE manual and perform the specified corrective action.