HP 3000 Manuals HP 3000 Manuals
Appendix B Cause and Diagnostic Codes
Diagnostic Codes in X.25 Clear Packets
Cause and diagnostic can be read from X.25 packets using NetIPC
intrinsics. The following tables show possible cause and diagnostic
codes generated by the X.25 XL system access product. These codes are a
subset of the CCITT (1984 X.25 recommendation) specified values.
The following lists the diagnostic codes (in decimal) sent and received
in X.25 clear packets. You can include cause and diagnostic codes with
the IPCCONTROL or IPCSHUTDOWN intrinsics that will be included in the
clear packet sent by the X.25 protocol. This function is only available
with SVCs.
Table B-1. Diagnostic Codes Sent/Received in Clear Packets
--------------------------------------------------------------------------------------------
| | |
| Diagnostic Code | Meaning/Cause |
| | |
--------------------------------------------------------------------------------------------
| | |
| 0 | No additional information |
| | |
--------------------------------------------------------------------------------------------
| | |
| 48 | Timer expired |
| | |
--------------------------------------------------------------------------------------------
| | |
| 65 | (1) Invalid facility code used. |
| | |
| | (2) the facility requested is not supported or allowed |
| | here: |
| | |
| | * Reverse charge in CALL CONF packet. |
| | |
| | * Fast select. |
| | |
| | * Throughout class negotiation (not configured). |
| | |
| | * Closed User Group facility in CALL CONF packet (not |
| | allowed). |
| | |
| | * Bilateral closed user group (not supported). |
| | |
| | * Packet size negotiation (not configured). |
| | |
| | * Window size negotiation (not configured). |
| | |
| | * RPOA facility (not supported). |
| | |
--------------------------------------------------------------------------------------------
Diagnostic Codes Sent/Received in Clear Packets(cont.)
--------------------------------------------------------------------------------------------
| | |
| Diagnostic Code | Meaning/Cause |
| | |
--------------------------------------------------------------------------------------------
| | |
| 70 | Incoming call barred. The configuration does not allow a |
| | call from this address. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 71 | No logical channel available. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 160 | DTE specific. The facility set used does not allow |
| | acceptance of a reverse charge call. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 231 | NSAP unreachable. The requested socket is unavailable. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 233 | Greater than 30,000 bytes of data were received. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 241 | A normal disconnect has occurred where the IPC user did |
| | not specify a diagnostic code. |
| | |
--------------------------------------------------------------------------------------------