HP 3000 Manuals HP 3000 Manuals
Chapter 2 Preparing to Configure DTCs
This chapter details the information you will need before you can
configure the datacommunications and terminal subsystem (DTS) for
host-based systems that include X.25 networking. DTS defines the
physical connections and configuration parameters for the computer, its
DTCs, and all DTC-connected devices.Sample worksheets are included to
facilitate configuration.
Hewlett-Packard recommends that you complete the DTS configuration before
configuring any NS network capabilities for your system.
This chapter describes how to:
* Plan the DTS configuration.
* Determine terminal and printer characteristics.
* Determine DTC characteristics.
* Determine X.25 network characteristics for both PAD and
system-to-system connections.
_________________________________________________________________
NOTE If you are not configuring X.25 networking capabilities on a
system using host- based network management, you should use
Configuring Systems for Terminals, Printers, and Other
Serial Devices (32022-61000) instead of this manual to
configure DTCs and DTC connections.
_________________________________________________________________