HP 3000 Manuals HP 3000 Manuals
Performing a Dynamic Reconfiguration
When you use the DTCCNTRL command to perform a dynamic
reconfiguration, you specify the RC function. You also specify a RECONF
option of ALL, X25, CARD, PASS, or LOGCL. If you do not specify a RECONF
option, the default of ALL is assumed.
The process of dynamic reconfiguration involves two steps:
1. Run NMMGR to modify configuration values. (See Table 7-1 for
a list of the configuration parametersthat can be modified through
dynamic reconfiguration.)
2. Enter the DTCCNTRL command using the RC function.
a. Use the RECONF=X25 option to download only X.25 values that
affect the operation of a specific DTC/X.25 Network Access
Card.
b. Use the RECONF=CARD option to download X.25 and PAD values
that affect the operation of a specific DTC/X.25 Network
Access Card.
c. Use the RECONF=ALL option to download both values that
affect the operation of specific cards and values that
affect the global operation of a DTC.
d. Use the RECONF=PASS option to download a new PAD access
password to a DTC. (Make sure that you also modify the
password for any other DTCs with DTC/X.25 Network access
cards configured to allow PAD support.)
e. Use the RECONF=LOGCL option to download a modified logging
class configuration.
Table 7-1. Dynamically Configurable Values
--------------------------------------------------------------------------------------
| | | |
| Parameter | NMMGR Screen | RECONF Option |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Maximum number of PAD | DTC X.25 Card Config. - Level 3 & | CARD, ALL |
| connections | Miscellaneous | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| X.25 link name | DTC X.25 Card Configuration - | X.25, CARD, ALL |
| | Sys-to-Sys LUGs | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Maximum number of | DTC X.25 Card Configuration - | X.25 CARD, ALL |
| switched virtual | Sys-to-Sys LUGs | |
| circuits | | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Remote X.25 addresses | DTC X.25 Card Configuration - | X.25, CARD, ALL |
| and security | Sys-to-Sys LUGs | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Allow access | DTC X.25 Card Configuration - PAD | CARD, ALL |
| | Security | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Remote X.25 calling | DTC X.25 Card Configuration - PAD | CARD, ALL |
| addresses | Security | |
| | | |
--------------------------------------------------------------------------------------
| | | |
| PAD access password | DTC Configuration | PASS, ALL |
| | | |
--------------------------------------------------------------------------------------
| | | |
| Enable logging class | DTC Configuration | LOGCL, ALL |
| | | |
--------------------------------------------------------------------------------------