HP 3000 Manuals HP 3000 Manuals
DTC PAD Profiles
The following tables ( Table 4-6 and Table 4-7 ) show the usable
DTC PAD profiles and their recommended usage. You must not use profiles
18, 45 and 50, even though they are available. All other numbers are
blocked, and cannot be entered.
Table 4-6. Terminal PAD Profiles
---------------------------------------------------------------------------------------
| | | |
| Profile | Definition | Usage |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 1 | PAD Test Init | Default terminal profile. Does not need to be |
| | profile X.3 setting | entered in the CALL User Data. Direct replacement |
| | Data Forward | for the "Terminal" device type of releases prior |
| | default | to 12.0. Ensures backward compatibility with DTC |
| | | 2.0 to 10.5. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 5 | PAD Test Init | Used in data transfer. Recommended for more |
| | profile X.3 setting | performance of the TELNET path (X.29 SERVER |
| | Data forward 3:127 | profile compatibility) or for iX character mode |
| | | applications which need to send each character to |
| | | the host (for example, HPEDIT). The profile loads |
| | | the X.25 line with many, small packets each time |
| | | the application needs a termination character |
| | | other than CR. The PAD must support 3:127. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 9 | PAD Test Init | Used in data transfer. Recommended when you need |
| | profile X.3 setting | more performance in iX character mode applications |
| | Data forward 4:1 | which need to send each character to the host. |
| | | The profile loads the X.25 line with many, small |
| | | packets each time the application requires a |
| | | termination character other than CR. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 13 | PAD Test Init | Used in data transfer. Recommended for more |
| | profile X.3 setting | performance in iX for VPLUS mode (NS/PAD |
| | Data forward 4:2 | compatibility) or for character mode applications |
| | | which need to send few characters to the host. |
| | | The profile loads the X.25 line with many, small |
| | | packets each time the application requires a |
| | | termination character other than CR. The PAD must |
| | | support 4:2. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 17 | PAD Test Init | Used in data transfer. Recommended if you don't |
| | profile No X.3 | want to change the hardcoded initial profile set |
| | setting Data | by PAD Support when an application controls |
| | forward default | requires the setting of X.3 parameters other than |
| | | echo, break or flow control. The user must ensure |
| | | that the editing characters are <BS> (ASCII 8) for |
| | | backspace, and Control-X (ASCII24) for the line |
| | | delete character. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 33 | No PAD test | Used at connection initialization. Recommended |
| | | for more performance at the connection |
| | | initialization, or if the PAD doesn't support the |
| | | setting of multiple Set and Read, or isn't able to |
| | | answer during the "PAD Test" sequence in |
| | | accordance with X.29 recommendations. For |
| | | example, for a PAD which answers with an X.29 PAD |
| | | error at a parameter setting instead of setting |
| | | the "error bit". The PAD must support the X.3 |
| | | setting needed by the applications. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 35 | No PAD test No init | Used at connection establishment. Recommended if |
| | profile X.3 setting | the user wants to keep the profile set before |
| | Data forward | connection initialization. The PAD must support |
| | default | the X.3 setting needed by the applications. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 37 | No PAD test Init | Used at connection initialization and during data |
| | profile X.3 setting | transfer. The PAD must support the X.3 settings |
| | Data forward 3:127 | required by the applications and the 3:127 data |
| | | forwarding. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 39 | No PAD test No init | Used at connection establishment and during data |
| | profile X.3 setting | transfer. Recommended if you want to combine |
| | Data forward 3:127 | profiles 35 and 5. The PAD must support the X.3 |
| | | settings needed by the applications and the 3:127 |
| | | data forwarding. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 41 | No PAD test No init | Used at connection establishment and during data |
| | profile X.3 setting | transfer. Recommended if you want to combine |
| | Data forward 4:1 | profiles 33 and 9. The PAD must support the X.3 |
| | | settings needed by the applications. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 43 | No PAD test No init | Used at connection establishment and during data |
| | profile X.3 setting | transfer. Recommended if you want to combine |
| | Data forward 4:1 | profiles 35 and 9. The PAD must support the X.3 |
| | | settings needed by the applications. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 45 | No PAD test Init | Used at connection establishment and during data |
| | profile X.3 setting | transfer. The PAD must support the X.3 settings |
| | Data forward 4:2 | needed by the applications and the 4:2 data |
| | | forwarding. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 47 | No PAD test No init | Used at connection establishment and during data |
| | profile X.3 setting | transfer. The PAD must support the X.3 settings |
| | Data forward 4:2 | needed by the applications and the 4:2 data |
| | | forwarding. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 49 | No PAD test Init | Used at connection establishment and during data |
| | profile No X.3 | transfer. The PAD must support the X.3 setting |
| | setting Data | needed by the applications. |
| | forward default | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 51 | No PAD test No init | Used at connection establishment and during data |
| | profile No X.3 | transfer. The PAD must support the X.3 settings |
| | setting Data | needed by the applications. |
| | forward default | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 85 | PAD test Init | Used at connection initialization and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 3:127 | PAD must support the 3:127 data forwarding. |
| | Forced data | |
| | forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 89 | PAD test Init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised in character |
| | setting Data | mode applications which need to send each |
| | forward 4:1 Forced | character to the host. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 93 | PAD test Init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 4:2 Forced | PAD must support the 4:2 data forwarding. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 117 | No PAD test Init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 3:127 | PAD must support the 3:127 data forwarding. |
| | Forced data | |
| | forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 119 | No PAD test No init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 3:127 | PAD must support the 3:127 data forwarding. |
| | Forced data | |
| | forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 121 | No PAD test Init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised in character |
| | setting Data | mode applications which need to send each |
| | forward 4:1 Forced | character to the host. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 123 | No PAD test No init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised in character |
| | setting Data | mode applications which need to send each |
| | forward 4:1 Forced | character to the host. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 125 | No PAD test Init | Used at connection initialization and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 4:2 Forced | PAD must support the 4:2 data forwarding. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 127 | No PAD test No init | Used at connection establishment and during data |
| | profile No X.3 | transfer. This profile is advised when you want |
| | setting Data | to force the data forwarding value selected. The |
| | forward 4:2 Forced | PAD must support the 4:2 data forwarding. |
| | data forwarding | |
| | | |
---------------------------------------------------------------------------------------
Table 4-7. Printer PAD Profiles
---------------------------------------------------------------------------------------
| | | |
| Profile | Definition | Usage |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 2 | PAD test Init | Default printer profile. Direct replacement for |
| | profile X.3 setting | the "Printer" device type of releases prior to |
| | Data forward | 12.0. Ensures DTC 2.0 to 10.5 backward |
| | default | compatibility. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 18 | PAD test Init | Used in data transfer. |
| | profile No X.3 | |
| | setting Data | |
| | forward default | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 32 | No PAD test No init | Used at a connection initialization. Recommended |
| | profile X.3 setting | if you want to keep the profile set before |
| | Data forward | connection establishment. To use this profile |
| | default | with iX, verify that the PAD supports the setting |
| | | of the idle timer to 1/20 seconds, if you want to |
| | | use terminal types such as TT22 or TT26. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 34 | No PAD test Init | Used at connection initialization. Recommended |
| | profile X.3 setting | for more performance at the connection |
| | Data forward | initialization, or if the PAD doesn't support the |
| | default | setting of multiple Set and Read, or if the PAD |
| | | can't answer during the "test of PAD" sequence in |
| | | accordance with the X.29 recommendations. For |
| | | example, a PAD which answers with an X.29 PAD |
| | | error at a parameter instead of setting the "error |
| | | bit". To use this profile with iX, the PAD must |
| | | support the setting of the idle timer to 1/20 |
| | | seconds, if you want to use a terminal type such |
| | | as TT22 or TT26. |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 48 | No PAD test No init | Used at connection initialization and during data |
| | profile No X.3 | transfer. |
| | setting Data | |
| | forward default | |
| | | |
---------------------------------------------------------------------------------------
| | | |
| 50 | No PAD test Init | Used at connection initialization and during data |
| | profile No X.3 | transfer. |
| | setting Data | |
| | forward default | |
| | | |
---------------------------------------------------------------------------------------