HP 3000 Manuals

Configuring and Managing Host-Based X.25 Links

Prepare the Network Management Configuration File 

Information required for network configuration on the host is contained
in one file.  This configuration file must be called NMCONFIG.PUB.SYS 
in order to be recognized by the system.  Only one configuration file can
be active at a time.

To create or modify the configuration file, use the Node Management
Configuration Manager, NMMGR.

When building a new configuration file, it is not necessary to define
every field.  This is because a sample configuration fileis supplied with
the MPE/iXoperating system.  The sample configuration file is called
NMSAMP1.PUB.SYS. Hewlett- Packard recommends that you use the sample file
as a template if you are creating a new system configuration file.  (Be
sure not to modify NMSAMP1.PUB.SYS. If you are using the sample file as a
template, copy the sample file to NMCONFIG.PUB.SYS before running NMMGR.)


CAUTION  Use the sample configuration file for new configurations only.
         Information previously configured using NMMGR, and stored in
         NMCONFIG.PUB.SYS, will be overwritten when the sample file is
         copied to NMCONFIG.PUB.SYS.

MPE/iX 5.0 Documentation