Software Configuration Maximums (MPE/iX 5.0) [ NS3000/iX NMMGR Screens Reference Manual ] MPE/iX 5.0 Documentation
NS3000/iX NMMGR Screens Reference Manual
Software Configuration Maximums (MPE/iX 5.0)
The following are the software maximums that must be adhered to when
configuring a supported link. These maximums may be further limited by
the system hardware (number of available slots). Maximums are also
documented throughout the manual for the appropriate screen.
Table 1-1. Configuration Maximums
------------------------------------------------------------------------------------
| |
| Screen Path Maximum Limit |
| Number/Description |
| |
------------------------------------------------------------------------------------
| |
| #9 Network None File Size Limit* |
| Directory Select |
| Node Name |
| |
| #85 Link Selection LINK 256/system |
| |
| #112 Network NETXPORT.NI 12 NI/system** |
| Interface |
| Configuration |
| |
| #115 NETXPORT.NI.NIname.MAPPING 1024 |
| Point-to-Point Mappings/Router |
| Mapping |
| Configuration |
| |
| #117 Gateway Half NETXPORT.NI.NIname.LINK 1 link/Gateway |
| NI Links Half NI |
| |
| #119 NETXPORT.NI.NIname.LINK 40 links/Router NI |
| Point-to-Point NI |
| Links |
| |
| #151 X.25 Network NETXPORT.NI.NIname.LINK 12 links/X.25 NI |
| Interface Links |
| |
| #152 Neighbor NETXPORT.NI.NIname.INTERNET 14 gateways/NI |
| Gateways |
| |
| #158 Neighbor NETXPORT.NI.NIname.INTERNET.gatewayn 2550 nets/NI*** |
| Gateway Reachable |
| Networks |
| |
| #162 X.25 SVC NETXPORT.NIname.PROTOCOL.X25.SVCPATH 2048/X.25 NI |
| Address Key Paths |
| |
| #163 X.25 PVC NETXPORT.NIname.PROTOCOL.X.25.PVCPATH 128/X.25NI |
| Address Key Paths |
| |
| #164 X.25 User NETXPORT.NI.NIname.PROTOCOL.X25.FACSET 128/X.25 NI |
| Facility Sets |
| |
------------------------------------------------------------------------------------
* Maintenance Node command EXPANDDIR may be used to expand the directory
file. Refer to Using the Node Management Services (NMS) Utilities manual
for information regarding this command.
** One NI must be used for loopback.
*** 2,550 reachable networks (255 pages and 10 reachable nets per page).
Only one gateway can be designated as a default gateway for each system.
MPE/iX 5.0 Documentation