HP 3000 Manuals HP 3000 Manuals
MOUTIL Errors
---------------------------------------------------------------
1 MESSAGE Verify: Initialize new Magneto-Optical volume ! on ldev !
[Y/N] ?
CAUSE An INITMO operation was requested.
ACTION Answer `Yes' if the operation is to be completed.
---------------------------------------------------------------
2 MESSAGE Verify: Delete data from Backup ! [Y/N] ?
CAUSE A SCRATCH command was requested to make media available for
backup usage.
ACTION Reply `Y' if media is to be scratched, `N' if data is to be
kept.
---------------------------------------------------------------
1 MESSAGE Error: Subsys: !, Info: !. (moutil 1)
CAUSE Internal MOUTIL error occurred.
ACTION Retry operation. Investigate error codes.
---------------------------------------------------------------
2 MESSAGE Error: Missing required parameter in command. (moutil 2)
CAUSE A required parameter was missing.
ACTION Retry command and specify all required parameters.
---------------------------------------------------------------
3 MESSAGE Error: Length of parameter exceeds maximum allowed. (moutil
3)
CAUSE Parameter specified is too long.
ACTION Shorten parameter and retry operation.
---------------------------------------------------------------
4 MESSAGE Error: Character composition of parameter not allowed.
(moutil 4)
CAUSE The composition of the parameter specified is invalid.
ACTION Correct the parameter and retry.
---------------------------------------------------------------
Table A-0. (cont.)
---------------------------------------------------------------
4 MESSAGE
*Note: MOUTIL is synchronizing the Optical Disk Library System tables.
*Note: Each media storage slot requires up to 1 1/2 minutes to synchronize.
*Note: There are xx media storage slots requiring synchronization.
CAUSE A SYNCTABLE command was requested.
ACTION Wait for operation to complete.
---------------------------------------------------------------
5 MESSAGE Error: Invalid parameter. (moutil 5)
CAUSE An invalid parameter was specified.
ACTION Remove the offending parameter and retry the operation.
---------------------------------------------------------------
6 MESSAGE Error: Invalid ldev parameter. (moutil 6)
CAUSE The ldev parameter was specified incorrectly.
ACTION Correct the ldev parameter and retry the operation.
---------------------------------------------------------------
8 MESSAGE Error: Ldev is not configured as an MO disk. (moutil 8)
CAUSE The ldev specified is not associated with an MO disk.
ACTION Specify a valid ldev and retry the operation.
---------------------------------------------------------------
10 MESSAGE Error: Parameter contains an invalid character(s). (moutil
10)
CAUSE The parameter has invalid characters.
ACTION Correct the parameter and retry the operations.
---------------------------------------------------------------
11 MESSAGE Error: First character of parameter must be alphabetic.
(moutil 11)
CAUSE The first character of the parameter is invalid.
ACTION Correct the parameter and retry the operation.
---------------------------------------------------------------
Table A-0. (cont.)
---------------------------------------------------------------
12 MESSAGE Warning: Error occurred during pre-erase operation. (moutil
12)
CAUSE An error occurred while erasing the media, so the pre-erase
operation failed.
ACTION Retry the MOUTIL request. If problem persists, do not use
media for backup. Remove media from unit.
---------------------------------------------------------------
14 MESSAGE Error: Volume name exceeds 8 characters in length. (moutil
14)
CAUSE The volume name for the Magneto-Optical disk is too long.
ACTION Shorten the volume name and retry the operation.
---------------------------------------------------------------
15 MESSAGE Error: Length of parameter exceeds maximum allowed. (moutil
15)
CAUSE The parameter length is too long.
ACTION Shorten parameter and retry the operation.
---------------------------------------------------------------
16 MESSAGE Error: Missing required parameter in command. (moutil 16)
CAUSE Required parameter is invalid.
ACTION Retry operation and specify the required parameter.
---------------------------------------------------------------
60 MESSAGE Error: Cannot scratch non-STORE media (moutil 60)
CAUSE Media was initialized with STORE=No in the INITMO command.
ACTION Retry operation with media that has been initialized for STORE
use.
---------------------------------------------------------------
124 MESSAGE Error: No help available for that command. (volutil 124)
CAUSE No help available for requested command.
ACTION None
---------------------------------------------------------------