Installing NewWave Office Products [ Preparing Additional Software Products for Use on the HP 3000 Series 9X8LX ] MPE/iX 5.0 Documentation
Preparing Additional Software Products for Use on the HP 3000 Series 9X8LX
Installing NewWave Office Products
NewWave Office products include HP DeskManager, HP Resource Sharing, and
HP Information Access. Instructions for installing HP Information Access
and HP Resource Sharing are listed below. Instructions for installing HP
DeskManager are found in the beginning of this chapter.
To install HP Resource Sharing
CAUTION If you attempt to connect a PC to shared resources before you
complete the steps listed above, you will have to restart the
system and perform these steps again. The message "Resource
Sharing Registration Completed" must appear on the console
before you can connect a PC to shared resource.
1. License information from the NewWave Office Software Certificate
must be recorded on the system before connections to shared
resources can be allowed. You do not need to record this
information again if you have recorded it previously, and it has
not changed.
If you need to update license information, or are recording it for
the first time, please refer to the "Installation" chapter in the
NewWave Office Resource Sharing for MPE XL Manual (32597-90082).
The "Installation" chapter provides the instructions for recording
license information from the software certificate with the
NWOLC.PPC.SYS program.
2. Stream JPDINSTL.NWOCONF.HPOFFICE to complete the installation.
Watch for the console message, "Resource Sharing Registration
Completed" to verify that HP Resource Sharing is ready to receive
connection requests from PCs.
3. If you have HP Information Access, continue below; otherwise,
return to chapter 5, "Creating a System Recovery Tape" in Setting
Up and Maintaining Your System; Installation Guide for the HP 3000
Series 9X7LX/9X8LX (B3813-90003).
To install HP Information Access
Please refer to the HP NewWave Office Information Access Server: System
Management Manual (B1716-90018) for installation instructions.
After you have completed the installation of HP Information Access,
please return to chapter 5, "Creating a System Recovery Tape" in Setting
Up and Maintaining Your System: Installation Guide for the HP 3000
Series 9X7LX/9X8LX (B3813-90003).
MPE/iX 5.0 Documentation