HP 3000 Manuals HP 3000 Manuals
Standard Items
Standard items are items supplied with HP ALLBASE/BRW. They are listed in
the following table.
Standard Items Table
-----------------------------------------------------------------------------------------
| |
| Name Type (1) Length Definition |
| |
-----------------------------------------------------------------------------------------
| |
| DATE D Current date |
| |
| TIME T Current time, when execution starts |
| |
| PAGE (2) I Current page |
| |
| LINE (2) I Current line on page |
| |
| USER S 8 User executing the report |
| |
| REPORT-DESCRIPT S 50 Report description |
| |
| REPORT-EXEC-FILE S 35 Report execution file |
| |
| REPORT-SPEC-FILE S 35 Specification file name |
| |
| SELECTION-SET (2) S 16 Selection set file name |
| |
| REQUEST-DATA1 (2) S 80 Parameter name and actual values used |
| ...REQUEST-DATA50 to execute the report. REQUEST-DATA1 |
| (2) represents the first parameter on the |
| Request Report screen, REQUEST-DATA2 |
| the second, and so on. If less than n |
| parameters are specified, REQUEST-DATAn |
| will show blanks. |
| |
| The following standard items are for advanced formatting control. For example, they |
| can be used to indicate which linesets are printed before and after the page heading |
| or footing. |
| |
| BREAK-LEVEL (2) I Level of last break (1-9); zero before |
| the first break footings are printed. |
| |
| LINESET-LEVEL (2) I Level of current lineset: 0 = report |
| level; 1-9 = break levels; 10 = detail. |
| Remains unchanged if page heading or |
| footing is printed. |
| |
| PREV-LSET-LEVEL (2) I Same as above, but shows level of |
| previous lineset. |
| |
| LINESET-TYPE (2) I Type of current lineset: 0 = detail; 1 |
| = heading; 2 = footing. Remains |
| unchanged if page heading or footing is |
| printed. |
| |
| PREV-LSET-TYPE (2) I Same as above, but shows type of |
| previous lineset. |
| |
-----------------------------------------------------------------------------------------
(1) Types are as follows: D = date; T = time; I = integer; S = string.
(2) These are not available for table calculated items.