HP 3000 Manuals HP 3000 Manuals
"Nonclass" Errors (Cont'd.)
Interpreting SYSGEN Messages and Error Codes (Continued)
System File (SYSFILE) Configurator Messages.
-------------------------------------------------------------
0201 MESSAGE **warning** boot image ! not deleted
CAUSE The boot image cannot be replaced or deleted.
ACTION None for system manager normally. Should be
handled by personnel with programming or SYSFILEP
file maintenance responsibilities.
-------------------------------------------------------------
0202 MESSAGE **warning** File not an IPL file. Include
anyway?
-------------------------------------------------------------
0204 MESSAGE **warning** no NMCONFIG file in this
configuration
CAUSE A remote configuration file has not been designated
through the SYSFILE RDCC command. SYSGEN uses the
default NMCONFIG.PUB.SYS file if it exists.
ACTION Enter a remote configuration file name through RDCC
in the SYSFILE Configurator. If a remote
configuration does not exist, create one through
NMMGR.
-------------------------------------------------------------
0205 MESSAGE **warning** ! is now the NMCONFIG file
CAUSE This message is issued with the prior message,
indicating the default remote configuration file
that is used. Usually, NMCONFIG.PUB.SYS is now the
NMCONFIG file appears.
ACTION If you want a different remote configuration file
used, designate the file through the SYSFILE
configurator RDCC command.
-------------------------------------------------------------
1000 MESSAGE **error** can't create temporary segment file
-------------------------------------------------------------
1001 MESSAGE **error** can't initialize temporary segment file
-------------------------------------------------------------
1002 MESSAGE **error** can't write to temporary segment file
-------------------------------------------------------------
1003 MESSAGE **error** You must specify a CM SL first
-------------------------------------------------------------
1004 MESSAGE **error** can't find system program file
CAUSE Nonexistent file, misspelled name, and so on.
-------------------------------------------------------------
1005 MESSAGE **error** segment name already exists
-------------------------------------------------------------
1006 MESSAGE **error** can't create temporary CM SL
-------------------------------------------------------------
1007 MESSAGE **error** can't open system SL
-------------------------------------------------------------
1008 MESSAGE **error** can't update system file configuration
CAUSE SYSGEN cannot update the SYSFILE for whatever
reason. The program dies.
ACTION Refer to the file system error for action to take.
-------------------------------------------------------------
1009 MESSAGE **error** can't read from system SL
-------------------------------------------------------------
1010 MESSAGE **error** can't write to temporary SL
-------------------------------------------------------------
1011 MESSAGE **error** can't delete system file
-------------------------------------------------------------
1012 MESSAGE **error** can't find system file --!
CAUSE Nonexistent file, misspelled, and so on.
-------------------------------------------------------------
1013 MESSAGE **error** can't add record to system file
configuration
CAUSE SYSGEN cannot add record to SYSFILE for whatever
reason. The program dies.
-------------------------------------------------------------
1014 MESSAGE **error** can't add segment "!" to temporary SL
-------------------------------------------------------------
1015 MESSAGE **error** command rejected by segmenter
-------------------------------------------------------------
1016 MESSAGE **error** command conditionally accepted by
segmenter
-------------------------------------------------------------
1017 MESSAGE **error** illegal calling sequence in segmenter
-------------------------------------------------------------
1018 MESSAGE **error** unable to create segmenter process
-------------------------------------------------------------
1019 MESSAGE **error** unable to activate segmenter process
-------------------------------------------------------------
1020 MESSAGE **error** unable to send mail to segmenter
process
-------------------------------------------------------------
1021 MESSAGE **error** unable to receive mail from segmenter
process
-------------------------------------------------------------
1022 MESSAGE **error** segmenter process aborted
-------------------------------------------------------------
1023 MESSAGE **error** can't delete segment "!" from temporary
SL
-------------------------------------------------------------
1024 MESSAGE **error** can't find system catalog
CAUSE Nonexistent system catalog, misspelled, and so on.
-------------------------------------------------------------
1025 MESSAGE **error** can't read from Sysfile configuration
file
CAUSE SYSGEN cannot read from SYSFILEP for whatever
reason. The program dies.
ACTION Refer to the file system error for action to take.
-------------------------------------------------------------
1026 MESSAGE **error** file ! does not exists
CAUSE Nonexistent file.
ACTION Check file spelling. Use name of file that exists.
-------------------------------------------------------------
1027 MESSAGE **error** system program already exists
CAUSE Trying to add program file that has already been
added, (possibly as a boot file, or other type).
ACTION Do a SHOW SYSFILE to determine what it is.
-------------------------------------------------------------
1028 MESSAGE **error** NM library already exists
-------------------------------------------------------------
1029 MESSAGE **error** CM SL is not switched
-------------------------------------------------------------
1030 MESSAGE CM SL has pending changes, want to ignore them
(yes/no)?
-------------------------------------------------------------
1031 MESSAGE **CM SL is not switched**
-------------------------------------------------------------
1032 MESSAGE **error** temporary CM SL prep fails
-------------------------------------------------------------
1033 MESSAGE **error** can't find boot images
-------------------------------------------------------------
1034 MESSAGE **error** file already exists in SYSFILE
configuration
-------------------------------------------------------------
1035 MESSAGE **error** file not found, or of different type: !
CAUSE Deleted system program, or doesn't exist.
ACTION Use correct delete, or check name.
-------------------------------------------------------------
1036 MESSAGE **error** image already exists in SYSFILE
configuration
CAUSE Each image must be unique across all types.
-------------------------------------------------------------
1037 MESSAGE **error** image doesn't exist in SYSFILE
configuration
CAUSE Can't delete if not there.
-------------------------------------------------------------
1042 MESSAGE **error** The version parm is only valid with
disc boot files
-------------------------------------------------------------
1043 MESSAGE **error** start version ! is already in use
-------------------------------------------------------------
1044 MESSAGE **error** all start versions are in use
-------------------------------------------------------------
1045 MESSAGE **error** nmlib version ! is already in use
-------------------------------------------------------------
1050 MESSAGE **error** parameter name is too long
-------------------------------------------------------------
1051 MESSAGE **error** Can't delete !. Delete the boot file
instead.
-------------------------------------------------------------
1052 MESSAGE **error** Can't find start's library (shouldn't
happen!)
-------------------------------------------------------------
1053 MESSAGE **error** The image you replace must be an IPL
image
-------------------------------------------------------------
1054 MESSAGE **error** There's already a ! file
CAUSE Can only have one.
-------------------------------------------------------------
1055 MESSAGE **error** Only ! tape boot files are allowed.
CAUSE Only ! fits in directory ISL uses.
-------------------------------------------------------------
1056 MESSAGE **error** Only ! disc boot files are allowed.
CAUSE Only ! fits in directory ISL uses.
-------------------------------------------------------------
1058 MESSAGE **error** Only ! system files are allowed.
-------------------------------------------------------------
1060 MESSAGE **error** Only the factory can ABOOT IPL files.
-------------------------------------------------------------
1061 MESSAGE **error** Couldn't find any files of mode !
-------------------------------------------------------------