HP 3000 Manuals

Class Errors (Cont'd.) [ MPE/iX Error Messages Manual Volume II ] MPE/iX 5.5 Documentation


MPE/iX Error Messages Manual Volume II

Class Errors (Cont'd.) 

Class Error 2 

Class error 2 is composed of translation look-aside buffer (TLB) and
cache failures.  These two types of errors are coded 23xx and 27xx.

Translation Look-Aside Buffer (TLB) Failure.   

translation look-aside buffer messages take the form:

       26xx

where:

     xx = detailed error number.

-------------------------------------------------------------

 00          MESSAGE    No message. System halts. (E)

           CAUSE      Undefined error occurred at the start of the test
                      of this board.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 01          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the read and write operation on the
                      space registers through space ID fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 02          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the read and write operation on the
                      space registers through MTSP fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 04          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the read or write access to a page
                      with proper protection and access right fails.
                      Second possible cause of the error is the cache
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 05          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the write disable bit operation
                      fails.  Second possible cause of the error is the
                      cache unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 06          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the public access operation fails.
                      Second possible cause of the error is the cache
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 07          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the PSW P Bit operation fails.
                      Second possible cause of the error is the cache
                      unit.  Third possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 08          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the data TLB MISS trap operation
                      fails.  Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 09          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the non-access data TLB MISS trap
                      operation fails.  Second possible cause of the
                      error is the instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 0A          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the debug trap operation fails.
                      Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 0B          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the dirty bit trap operation fails.
                      Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 0C          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the virtual I/O trap operation
                      fails.  Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 0D          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the physical page number RAMs
                      fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 10          MESSAGE    No message. System halts. (E)

           CAUSE      Lower privilege trap does not occur.  Second
                      possible cause of the error is the instruction
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 11          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the data path through PIDs fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 12          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the data path through PCSQ fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 13          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the I bit functionality fails.
                      Second possible cause of the error is the cache
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 14          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the physical address generation or
                      the physical page number RAM fails.  Second
                      possible cause of the error is the cache unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 15          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the read and write with virtual
                      address operation fails.  Second possible cause of
                      the error is the cache unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 16          MESSAGE    No message. System halts. (E)

           CAUSE      Gateway instruction does not promote privilege to
                      zero in a real mode.  Second possible cause is the
                      instruction unit.  Third possible cause is the
                      register file.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 18          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the privilege level generation with
                      gateway instruction for page types 2 or 3 fails.
                      Second possible cause is the instruction unit.
                      Third possible cause is the register file.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 19          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the privilege level generation with
                      gateway instruction for page types 4, 5, 6, or 7
                      fails.  Second possible cause is the instruction
                      unit.  Third possible cause is the register file.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 1A          MESSAGE    No message. System halts. (E)

           CAUSE      Gateway instruction does not promote privilege to
                      zero in a virtual mode.  Second possible cause is
                      the instruction unit.  Third possible cause is the
                      register file.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 1B          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the execution of the gateway
                      instruction in delay slot of the branch fails.  (No
                      trap is generated.)  Second possible cause is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 1C          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the generation of a data memory
                      protection trap fails.  Second possible cause is
                      the instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 1D          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the generation of an instruction
                      memory protection trap fails.  Second possible
                      cause is the instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 20          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the ISR operation fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 21          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the IOR operation fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 22          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the parity generator and parity
                      checking on the data TLB physical page number RAM
                      fails.  Second possible cause is the instruction
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 23          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the parity generator and parity
                      checking on the instruction TLB physical page
                      number RAM fails.  Second possible cause is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 26          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the memory protection trap with
                      byte access fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 27          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the memory protection trap with
                      half word access fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 28          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the memory protection trap with
                      word access fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 29          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the instruction TLB MISS fault
                      fails.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 2A          MESSAGE    No message. System halts. (E)

           CAUSE      Cannot force data TLB MISS fault.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 2B          MESSAGE    No message. System halts. (E)

           CAUSE      Cannot verify protection ID, access ID.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 2C          MESSAGE    No message. System halts. (E)

           CAUSE      Cannot verify public pages.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 2D          MESSAGE    No message. System halts. (E)

           CAUSE      Cannot distinguish between instruction CA and data
                      CA with the diagnostic register.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 2E          MESSAGE    No message. System halts. (E)

           CAUSE      Verification of the two cycle opcode instruction
                      fails.  Cannot verify TLB FREZ.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 31          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected instruction TLB MISS fault occurs.
                      Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 32          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected instruction memory protection trap
                      occurs.  Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 33          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected TLB MISS trap occurs.  Second possible
                      cause of the error is the instruction unit.

           ACTION     contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 34          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected nonaccess instruction TLB MISS trap
                      occurs.  Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 35          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected nonaccess instruction TLB MISS trap
                      occurs.

                      Second possible cause of the error is the
                      instruction unit

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 36          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected data memory protection trap occurs.

                      Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 37          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected data memory break trap occurs.  Second
                      possible cause of the error is the instruction
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 38          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected TLB dirty bit fault occurs.  Second
                      possible cause of the error is the instruction
                      unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 39          MESSAGE    No message. System halts. (E)

           CAUSE      Unexpected virtual device reference trap occurs.
                      Second possible cause of the error is the
                      instruction unit.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------

 40          MESSAGE    No message. System halts. (E)

           CAUSE      Cannot verify the TLB indexing through its RAM.

           ACTION     Contact your Hewlett-Packard Support
                      Representative.

-------------------------------------------------------------



MPE/iX 5.5 Documentation