HP 3000 Manuals HP 3000 Manuals
(Subsystem 236)(Continued)
------------------------------------------------------------
8520 MESSAGE An error occurred while locking the input SPFDIR.
-------------------------------------------------------------
8521 MESSAGE An error occurred while looking for the
spoolfile's entry in the SPFDIR.
-------------------------------------------------------------
8522 MESSAGE An error occurred while updating the owner and
creator names in the spoolfile's file label and
FLABX.
-------------------------------------------------------------
8523 MESSAGE An error occurred while unlocking the input
SPFDIR.
-------------------------------------------------------------
8524 MESSAGE An error occurred while unlocking the input
spoolfile's GUFD.
-------------------------------------------------------------
8550 MESSAGE Input spooler, LDEV #\: The spooler detected a
fatal condition while performing an internal
calculation. Please report the spooling subsystem
error to your support engineer.
-------------------------------------------------------------
8551 MESSAGE Input spooler, Device Name !: Cannot retrieve
LDEV# or other configuration info.
-------------------------------------------------------------
8552 MESSAGE Input spooler, LDEV #: Cannot update device
configuration tables.
-------------------------------------------------------------
8553 MESSAGE Input spooler, LDEV #: Cannot open physical
device.
-------------------------------------------------------------
8554 MESSAGE Input spooler, LDEV #: HPFOPEN of a new input
spoolfile failed.
-------------------------------------------------------------
8555 MESSAGE Input spooler, LDEV #: FCLOSE of a new input
spoolfile failed.
-------------------------------------------------------------
8556 MESSAGE Input spooler, LDEV #: I/O error during FWRITE
to input spoolfile.
-------------------------------------------------------------
8557 MESSAGE Input spooler, LDEV #: Cannot update the input
spoolfile's entry in the Spoolfile Directory.
-------------------------------------------------------------
8558 MESSAGE An error occurred when receiving message from the
spooler port.
-------------------------------------------------------------
8559 MESSAGE Input spooler, LDEV #: An invalid msg type was
received by the input spooling process.
-------------------------------------------------------------
8560 MESSAGE Input spooler, LDEV #: The input spooled device
no longer accepts :JOB or :DATA. Spooling will be
stopped.
-------------------------------------------------------------
8561 MESSAGE Input spooler, LDEV #: Failed to rewind and
unload current tape volume. Must be done manually.
Spooling will be stopped.
-------------------------------------------------------------
8562 MESSAGE Input spooler, LDEV #: Spooler internal error,
RECOVER invoked, spooler terminating.
-------------------------------------------------------------
8563 MESSAGE Input spooler, LDEV #: A fatal error was
encountered by the input spooling process.
Spooling will be stopped.
-------------------------------------------------------------
8564 MESSAGE Input spooler, LDEV #: A fatal error was
encountered while converting the LDEV number to a
device name. Spooling will be stopped.
-------------------------------------------------------------
9001 MESSAGE Output spooler, LDEV #: Started.
-------------------------------------------------------------
9002 MESSAGE Output Spooler, LDEV #: Stopped.
-------------------------------------------------------------
9003 MESSAGE Output spooler, LDEV #: Suspended.
-------------------------------------------------------------
9004 MESSAGE Output spooler, LDEV #: Resumed.
-------------------------------------------------------------
9005 MESSAGE Output spooler, LDEV #: File released
successfully.
-------------------------------------------------------------
9006 MESSAGE Output spooler, LDEV #: Spoolfile EOF detected.
NOTE: This message is never displayed.
-------------------------------------------------------------
9007 MESSAGE Output spooler, LDEV #: The File System reported
a warning while acquiring the spooled device. The
spooler will continue.
-------------------------------------------------------------
9008 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while initializing its device.
The spooler will continue.
-------------------------------------------------------------
9010 MESSAGE Output spooler, LDEV #: The Directory subsystem
reported a warning while trying to create the
checkpoint file group. The spooler will continue.
-------------------------------------------------------------
9011 MESSAGE Output spooler, LDEV #: The Device Allocation
subsystem reported a warning while the spooler was
retrieving device configuration information. The
spooler will continue.
-------------------------------------------------------------
9012 MESSAGE Output spooler, LDEV #: The Device Allocation
subsystem reported a warning while the spooler was
updating device configuration information. The
spooler will continue.
-------------------------------------------------------------
9013 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while trying to ;RELEASE a
file. The file is released and the spooler will
continue.
-------------------------------------------------------------
9014 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while determining its next
task. The spooler will continue.
-------------------------------------------------------------
9015 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while performing an internal
calculation. Please report the warning number to
your support engineer. The spooler will continue.
-------------------------------------------------------------
9016 MESSAGE Output spooler, LDEV #/: The spooler detected a
non-fatal condition while retrieving information
from the Spooling Process Information Table (SPIT).
The spooler will continue.
-------------------------------------------------------------
9017 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while updating the Spooling
Process Information Table (SPIT). The spooler will
continue.
-------------------------------------------------------------
9018 MESSAGE Output spooler, LDEV #: The spooler was unable
to save the page number to resume at. It will
continue to use the previous value of this page.
-------------------------------------------------------------
9019 MESSAGE Output spooler, LDEV #: The restart page
specified is before the beginning of the spoolfile.
The spooler will restart at the beginning.
-------------------------------------------------------------
9020 MESSAGE Output spooler, LDEV #: There is no file to
output at this time. (NOTE: This message is never
displayed.)
-------------------------------------------------------------
9021 MESSAGE Output spooler, LDEV #: Received a command while
outputting a file.
CAUSE An operator command, such as SPOOLER <ldev>;STOP
was received by the spooler process for <ldev>
while the process was printing user data.
ACTION No action is required. The message is to reassure
the operator that the spooler got the command,
because the printer may continue to print for some
time afterward due to the large amount of buffered
data in the file system path.
-------------------------------------------------------------
9022 MESSAGE Output spooler, LDEV #: The device has reported
a power failure or other interruption while
outputting SPOOLID #0!. The spooler will attempt
recovery.
CAUSE The spooled device lost power while printing user
data, causing it to lose track of where it was
printing on the page. When power is restored, the
the device reports the power loss to the spooler.
ACTION No user action is required. The spooler will try
to recover to the beginning of the page which was
partially printed at the time the device lost
power.
-------------------------------------------------------------
9023 MESSAGE Output spooler, LDEV #: Device status is
available. (NOTE: This message is never
displayed.)
-------------------------------------------------------------
9024 MESSAGE Output spooler, LDEV #: "Actual device status"
cannot be requested in this context. "Buffered
status" will be used.
-------------------------------------------------------------
9025 MESSAGE Output spooler, LDEV #: The device was still in
silent-run mode when the spooler detected the end
of SPOOLID #0!.
CAUSE Silent-run is a recovery mechanism in which the
device interprets, but does not print, data until
it reaches the page at which printing should
resume. If the spooler detects the end of the
spoolfile first, it defers the file.
ACTION Enter SPOOLF <spoolid>;UNDEFER to print the file
from the beginning. Once the file is printing, use
SPOOLER...;SUSPEND and ;RESUME with OFFSET= if you
want to print from a different location.
-------------------------------------------------------------
9026 MESSAGE Output spooler, LDEV #: The device reported a
ribbon malfunction. The spooler will suspend.
Enter a command to resume operation or to stop.
-------------------------------------------------------------
9027 MESSAGE Output spooler, LDEV #: A request to mount
special forms for SPOOLID #0! was refused by the
device attender.
CAUSE During the forms message dialog, the operator
REPLYed N to the question: SP#<pin>/IS #<spoolid>;
<filename> ON LDEV#<ldev> (Y/N)?
ACTION If the file should be printed on another device,
enter SPOOLF <spoolid>; DEV= <new device>;UNDEFER.
If it should be printed on this device but at a
later time, enter SPOOLF <spoolid>; UNDEFER at that
time.
-------------------------------------------------------------
9028 MESSAGE Output spooler, LDEV #: The restart page
specified is greater than 2^32-1, the maximum value
allowed. The spooler will use the maximum value.
-------------------------------------------------------------
9029 MESSAGE Output spooler, LDEV #: Device has reported a
power failure or other interruption while
outputting the header for SPOOLID #O!. The spooler
will reprint the header.
CAUSE The spooled device lost power while printing the
header, causing it to lose track of where it was
printing on the page. When power is restored, the
device reports the power loss to the spooler.
ACTION No user action is required. The spooler
automatically reprints the header.
-------------------------------------------------------------
9030 MESSAGE Output spooler, LDEV #: Device has reported a
power failure or other interruption while
outputting the trailer for SPOOLID #O!. The
spooler will reprint the trailer.
CAUSE The spooled device lost power while printing the
trailer, causing it to lose track of where it was
printing on the page. When power is restored, the
device reports the power loss to the spooler.
ACTION No user action is required. The spooler
automatically reprints the trailer.
-------------------------------------------------------------
9031 MESSAGE Output spooler, LDEV #: Device has reported a
power failure or other interruption while
outputting the error trailer for SPOOLID #O!. The
spooler will reprint the error trailer.
CAUSE The spooled device lost power while printing the
error trailer, causing it to lose track of where it
was printing on the page. When power is restored,
the device reports the power loss to the spooler.
ACTION No user action is required. The spooler
automatically reprints the error trailer.
-------------------------------------------------------------