HP 3000 Manuals HP 3000 Manuals
VOLUTIL Messages
dialog
-------------------------------------------------------------
1 MESSAGE *Error: Unexpected error returned from execution
of FFILEINFO intrinsic. (dialog 1)
-------------------------------------------------------------
2 MESSAGE *Error: Unable to close INPUT file. (dialog 2)
-------------------------------------------------------------
3 MESSAGE *Error: Unable to close OUTPUT file. (dialog 3)
-------------------------------------------------------------
4 MESSAGE *Error: Unexpected error occurred during INPUT
file input/output. (dialog 4)
-------------------------------------------------------------
5 MESSAGE *Error: Unexpected error occurred during OUTPUT
file input/output. (dialog 5)
-------------------------------------------------------------
6 MESSAGE *Error: Unexpected error occurred during $STDIN
input operation. (dialog 6)
-------------------------------------------------------------
7 MESSAGE *Error: Unexpected error occurred during $STDLIST
output operation. (dialog 7)
-------------------------------------------------------------
8 MESSAGE *Error: Unexpected error from FCONTROL intrinsic
with INPUT file. (dialog 8)
-------------------------------------------------------------
9 MESSAGE *Error: Unexpected error from execution of
FGETINFO intrinsic. (dialog 9)
-------------------------------------------------------------
10 MESSAGE *Error: File type not ASCII. (dialog 10)
-------------------------------------------------------------
11 MESSAGE *Error: Invalid file record size. (dialog 11)
-------------------------------------------------------------
12 MESSAGE *Error: Unexpected error from execution of
PRINTOPREPLY intrinsic. (dialog 12)
-------------------------------------------------------------
13 MESSAGE *Error: End-of-file encountered on OUTPUT file.
(dialog 13)
-------------------------------------------------------------
14 MESSAGE *Error: End-of-file encountered on INPUT file.
(dialog 14)
-------------------------------------------------------------
15 MESSAGE *Error: End-of-file encountered on $STDLIST.
(dialog 15)
-------------------------------------------------------------
16 MESSAGE *Error: Unexpected error from FPOINT intrinsic.
(dialog 16)
-------------------------------------------------------------
parserr
-------------------------------------------------------------
15 MESSAGE *Error: The VNAME parameter is required. (parserr
15)
CAUSE When you entered the NEWVOL command, you forgot to
specify a name for the volume.
ACTION Reenter the NEWVOL command and remember to specify
a volume name.
-------------------------------------------------------------
shell
-------------------------------------------------------------
1 MESSAGE *Error: Incomplete command pending on
end-of-file. (shell 1)
-------------------------------------------------------------
2 MESSAGE *Error: Unable to process command. (shell 2)
-------------------------------------------------------------
3 MESSAGE *Error: Invalid parameter length. (shell 3)
-------------------------------------------------------------
4 MESSAGE *Error: Command history stack is empty. (shell 4)
-------------------------------------------------------------
5 MESSAGE *Error: Command not found in command history
stack. (shell 5)
-------------------------------------------------------------
6 MESSAGE *Error: Invalid parameter length or composition.
(shell 6)
-------------------------------------------------------------
7 MESSAGE *Error: Unrecognized command. (shell 7)
-------------------------------------------------------------
8 MESSAGE *Error: GET_NAME error. (shell 8)
-------------------------------------------------------------
9 MESSAGE *Error: This command has no associated
functionality. (shell 9)
-------------------------------------------------------------
10 MESSAGE *Error: Error in accessing message catalog.
(shell 10)
-------------------------------------------------------------
11 MESSAGE *Error: Invalid numeric index into command
history stack. (shell 11)
-------------------------------------------------------------
12 MESSAGE *Error: Command name length exceeds 16
characters. (shell 12)
-------------------------------------------------------------
13 MESSAGE *Error: Insufficient capabilities to execute this
command. (shell 13)
-------------------------------------------------------------
14 MESSAGE *Error: MiUssing required parameter not specified
in command. (shell 14)
-------------------------------------------------------------
15 MESSAGE *Error: Parameter can consist of numeric
characters only. (shell 15)
-------------------------------------------------------------
16 MESSAGE *Error: Depth of command stack can only be in the
range 1 to 100. (shell 16)
-------------------------------------------------------------
17 MESSAGE *Error: Invalid key option specified for set
command. (shell 17)
-------------------------------------------------------------
18 MESSAGE *Error: Command only valid in interactive mode.
(shell 18)
-------------------------------------------------------------
19 MESSAGE *Error: Subsys !, Info: !. (shell 19)
-------------------------------------------------------------
20 MESSAGE *Error: Invalid command edit operation. (shell
20)
-------------------------------------------------------------
volutil
-------------------------------------------------------------
53 MESSAGE *Error: Volume already exists. (volutil 53)
CAUSE When you entered the NEWVOL command, you specified
a volume name that already exists.
ACTION Use the DSET command to examine the names and
characteristics of all the volumes currently on the
system. Then reenter the NEWVOL command and
specify a volume name that does not exist for the
current volume set.
-------------------------------------------------------------
54 MESSAGE *Error: Volume does not exist. (volutil 54)
CAUSE When you entered the INITVOL command, you specified
a volume name associated with a particular volume
set, but a volume of that name does not exist.
ACTION Use the SHOWSET command to examine the names of all
volumes in the current volume set. Then reenter
the INITVOL command and specify a volume name that
does exist in the current volume set.
-------------------------------------------------------------
70 MESSAGE *Error: Ldev is not a valid disk type for
mirroring (volutil 70)
CAUSE Mirrored disks are not the correct type (HP7937FL)
for volume initialization.
ACTION Use correct disk type.
-------------------------------------------------------------
71 MESSAGE *Error: Mirrored volumes must be specified as a
pair. (volutil 71)
CAUSE Only one volume was specified in NEWMIRRSET or
NEWMIRRVOL.
ACTION Specify correct number of disks.
-------------------------------------------------------------
72 MESSAGE *Error: Mirrored volumes must be unique. (volutil
72)
CAUSE LDEV's specified a duplicate number.
ACTION Specify a unique LDEV.
-------------------------------------------------------------
73 MESSAGE *Error: Cannot add mirrored volumes to
non-mirrored volume set. (volutil 73)
CAUSE Mirrored volumes cannot be added to a non-mirrored
volume set.
ACTION Specify a mirrored volume set.
-------------------------------------------------------------
74 MESSAGE *Error: Cannot add non-mirrored volumes to a
mirrored volume set. (volutil 74)
CAUSE Non-mirrored volumes cannot be added to a mirrored
volume set.
ACTION Specify a mirrored volume.
-------------------------------------------------------------
75 MESSAGE *Error: Specified volume set is not mirrored.
(volutil 75)
CAUSE An attempt was made to perform a mirrored operation
on a non-mirrored volume set.
ACTION Cause indicates appropriate action.
-------------------------------------------------------------
76 MESSAGE *Error: Specified volume does not exist on
specified ldev. (volutil 76)
CAUSE Either the wrong volume name or the wrong LDEV was
specified.
ACTION Cause indicates appropriate action.
-------------------------------------------------------------
77 MESSAGE *Error: Command only valid for disabled mirrored
volumes. (volutil 77)
CAUSE REPLALCEMIRRVOL was issued for a non-disabled
volume.
ACTION Cause indicates appropriate action.
-------------------------------------------------------------
78 MESSAGE *Error: Illegal replace. Mirrored partner is not
available. (volutil 78)
CAUSE REPLALCEMIRRVOL was issued but good volume was not
mounted as MEMBER or MASTER.
ACTION Verify that volume used is good.
-------------------------------------------------------------
79 MESSAGE *Error: Mirrored volume must be in pending state.
(volutil 79)
CAUSE The volume specified in the SUSPENDMIRROR command
was not in a pending state.
ACTION Be sure specified volume is pending before issuing
command.
-------------------------------------------------------------
80 MESSAGE *Error: Command not supported for mirrored volume
sets. (volutil 80)
CAUSE The COPYSET command is not supported for mirrored
volume sets.
ACTION Use a different command.
-------------------------------------------------------------
83 MESSAGE *Error: Illegal replace. MIrrored pair is already
in operation. (volutil 83)
CAUSE REPLACEMIRRORVOL was issued on an already
functioning mirrored pair.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
85 MESSAGE *Error: User volumes incomplete, cannot use as
repair source. (volutil 85)
CAUSE The JOINMIRRSET command with SOURCE=USER was
specified, and one or more user volumes are
missing.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
86 MESSAGE *Error: Backup volumes incomplete, cannot use as
repair source. (volutil 86)
CAUSE The JOINMIRRSET command with SOURCE=BACKUP was
specified, and one or more backup volumes are
missing.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
87 MESSAGE *Error: Volume set close failed during join.
(volutil 87)
CAUSE SOURCE=BACKUP was specified for the join and it
failed. One of the reasons could be that users are
still logged onto the destination volume set. The
JOINMIRRSET command with SOURCE=BACKUP was
specified, and one or more backup volumes are
missing.
ACTION Log off all users from the volume set and retry the
JOINMIRRSET. If SOURCE=USER was specified and this
message is seen, a split-volume backup is taking
place on the backup volumes.
-------------------------------------------------------------
88 MESSAGE *Error: New volumes cannot be added to a split
volume set. (volutil 88)
CAUSE The NEWVOL command was used to attempt to add
volumes to a split-volume set.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
89 MESSAGE *Error: Mirrored partner is already in suspend
mirror state. (volutil 89)
CAUSE A SUSPENDMIRRVOL command was issued against a
volume whose partner is in the SUSPENDMIRR state.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
122 MESSAGE *Error: Volume mounted in invalid state for
desired operation. (volutil 122)
CAUSE When you entered the INITVOL command, you specified
a value for the state parameter which is not valid.
ACTION CAUSE indicates appropriate action.
-------------------------------------------------------------
130 MESSAGE *Error: Error encountered while reading first
file label. (volutil 130)
-------------------------------------------------------------
131 MESSAGE *Error: No tape label on the beginning of tape.
Cannot recover. (volutil 131)
-------------------------------------------------------------
132 MESSAGE *Error: Recover aborted because of tape label
error. (volutil 132)
-------------------------------------------------------------
133 MESSAGE *Error: Recover aborted because of tape error.
(volutil 133)
-------------------------------------------------------------
134 MESSAGE *Error: Recover aborted because of tape
positioning error. (volutil 134)
-------------------------------------------------------------
135 MESSAGE *Error: Recover aborted because of file closing
error. (volutil 135)
-------------------------------------------------------------
136 MESSAGE *Error: Recover aborted by user. (volutil 136)
-------------------------------------------------------------
137 MESSAGE *Error: Recover aborted because of incorrect
capability. (volutil 137)
-------------------------------------------------------------
MESSAGE *Error: Destination volume on ldev ! not mounted
in valid state.
-------------------------------------------------------------
MESSAGE *Error: Invalid response. Please answer with a
`Y', `YES', `N', or `NO'.
-------------------------------------------------------------
MESSAGE *Error: Source volume on ldev ! not a member of
set being copied.
-------------------------------------------------------------
MESSAGE *FATAL ERROR: OUTER-MOST
RECOVER BLOCK INVOKED.
PROGRAM WILL TERMINATE.
-------------------------------------------------------------
MESSAGE Subsys !, Info: !.
-------------------------------------------------------------