HP 3000 Manuals HP 3000 Manuals
Showing the State of Configurators
The SHOW command (abbreviated SH) displays the current state of the
SYSGEN global facilities.
SHOW has the following syntax:
SHOW [TYPE = BASEGROUP ]
[ NEWGROUP ]
[ VERSION ]
[ PERMYES ]
[ CONFIGURATOR ]
[ ALL ]
[DEST = OFFLINE ]
BASEGROUP lists the name of the current working configuration's base
group.
NEWGROUP lists the name of the current new configuration group.
VERSION displays the version number of SYSGEN. The version number is also
displayed in the SYSGEN banner.
PERMYES shows whether SYSGEN prompts you for confirmation before
performing potentially serious commands.
CONFIGURATOR lists all modified configurators.
ALL provides a combined listing of the configuration information provided
by the TYPE parameters defined above.
OFFLINE sends output to SYSGEN's listing file, SYSGLIST. Using OFFLINE in
the SHOW command line does not immediately generate a printout. The
information is sent to SYSGLIST until you either enter the OCLOSE command
or exit SYSGEN. Exiting SYSGEN or using OCLOSE closes SYSGLIST and prints
the file.
Entering SHOW without TYPE parameters is the same as specifying SHOW ALL.
Example 4-6 demonstrates using the SHOW ALL command.
________________________________________________________________
| |
| |
| sysgen>SHOW ALL |
| base configuration group = CONFIG |
| new configuration group = |
| SYSGEN version D.01.01 : catalog version D.01.01 |
| permyes is false--system will have to answer |
| questions |
| ** no configurators are modified** |
| |
________________________________________________________________
Example 4-6. Using the Global Module SHOW ALL