HP 3000 Manuals HP 3000 Manuals
INITVOL
The INITVOL command initializes a volume that was previously defined by
the NEWVOL command.
If a volume was not mounted when the NEWVOL command was used without the
ldev parameter, it was only defined. When a volume is defined only, the
volume name, initial class assignments, and permanent and transient space
allocations are recorded in the volume set information table (VSIT) of
the volume set master.
You can then initialize a volume with the INITVOL command and create a
volume label, label table, and free space map.
This command is used when it is necessary to create a volume set with
more volumes than you have available disks on the system. When the other
volumes become available, they need only be initialized.
Task
Initializes a volume that was defined by NEWVOL.
Capability
CV, create mountable volume set
Syntax
INITVOL [VNAME=]sname:vname
[LDEV=]ldev
Parameters
sname The volume set containing the volume to be
initialized. The master volume of this set must be
mounted in the MASTER state. This command will not
use the default volume set. Required.
vname The volume to be initialized. This volume must
already be defined by a NEWVOL command. Required.
ldev A number from 1 to 100 specifying the logical
device number of the volume that will be
initialized. It must specify a drive with a volume
in the SCRATCH or UNKNOWN state. INITVOL asks for
verification before proceeding. Required.
Example
This example shows how to initialize a volume that the NEWVOL command
previously defined.
1. Use the INITVOL command to initialize BVOL6.
2. Use SHOWSET to display volume status.
3. Use DSTAT ALL to display that the volume is available.
___________________________________________________________________________________
| |
| |
| volutil: INITVOL BSET:BVOL6 LDEV=23 |
| |
| Verify: Initialize new member volume BSET:BVOL6 on ldev 23 [Y/N] ?Y |
| Note: New member volume has been initialized on ldev 23. |
| |
| volutil: SHOWSET BSET DSTATUS |
| |
| Volume name: State: Ldev: Type: Path: |
| ----------- ----- ---- ---- ---- |
| |
| BVOL1 MASTER 21 079330 8.0.4 |
| BVOL2 MEMBER 22 079350 8.0.5 |
| BVOL3 (VOLUME NOT AVAILABLE) |
| BVOL4 (VOLUME NOT AVAILABLE) |
| BVOL5 (VOLUME NOT AVAILABLE) |
| BVOL6 MEMBER 23 079350 8.0.6 |
| |
| volutil: :DSTAT ALL |
| |
| LDEV-TYPE STATUS VOLUME (VOLUME SET - GEN) |
| ----------- --------- --------------------------- |
| 1-079350 MASTER MEMBER1 (MPEXL_SYSTEM_VOLUME_SET-0) |
| 2-079350 MEMBER MEMBER2 (MPEXL_SYSTEM_VOLUME_SET-0) |
| 21-079330 MASTER BVOL1 (BSET-0) |
| 22-079350 MEMBER BVOL2 (BSET-0) |
| 23-079350 MEMBER BVOL6 (BSET-0) |
| |
___________________________________________________________________________________