HP 3000 Manuals HP 3000 Manuals
(S/R) (contd)
552 MESSAGE 'NOKEEP' OPTION CANNOT BE USED IN CONJUNCTION
WITH THE 'KEEP' OPTION. (S/R 552)
CAUSE Nokeep and keep options are not allowed on the same
command line.
ACTION Delete either nokeep or keep option and retype the
command.
---------------------------------------------------------------
553 MESSAGE 'NOKEEP' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION. (S/R 553)
CAUSE Nokeep and listdir options are not allowed on the
same command line.
ACTION Delete either nokeep or listdir option and retype
the command.
---------------------------------------------------------------
561 MESSAGE WARNING: 'OLDDATE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 561)
CAUSE The OLDDATE option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
562 MESSAGE 'OLDDATE' OPTION CANNOT BE USED IN CONJUNCTION
WITH THE 'NEWDATE' OPTION. (S/R 562)
CAUSE Olddate and newdate options are not allowed on the
same command line.
ACTION Delete either olddate or newdate option and retype
the command.
---------------------------------------------------------------
563 MESSAGE 'OLDDATE' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION. (S/R 563)
CAUSE Olddate and listdir options are not allowed on the
same command line.
ACTION Delete either olddate or listdir option and retype
the command.
---------------------------------------------------------------
571 MESSAGE WARNING: 'NEWDATE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 571)
CAUSE The NEWDATE option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
572 MESSAGE 'NEWDATE' OPTION CANNOT BE USED IN CONJUNCTION
WITH THE 'OLDDATE' OPTION. (S/R 572)
CAUSE Newdate and olddate options are not allowed on the
same command line. .
ACTION Delete either newdate or olddate option and retype
the command.
---------------------------------------------------------------
573 MESSAGE 'NEWDATE' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION. (S/R 573)
CAUSE Newdate and listdir options are not allowed on the
same command line. .
ACTION Delete either newdate or listdir option and retype
the command.
---------------------------------------------------------------
581 MESSAGE 'LISTDIR' OPTION CANNOT BE USED IN CONJUNCTION
WITH ANY OTHER OPTION ASIDE FROM THE 'DIRECTORY'
OPTION. (S/R 581)
CAUSE Same as the message content.
ACTION Information only.
---------------------------------------------------------------
591 MESSAGE WARNING: 'DATE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 591)
CAUSE The DATE option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
592 MESSAGE EXPECTED '<=accdate' OR '>=moddate' AFTER 'DATE'
OPTION WHERE '<= PRIOR TO OR THE SAME AS THAT DATE
WILL BE SELECTED FOR STORE, AND '>=moddate'
SPECIFIES A DATE SUCH THAT FILES MODIFIED AFTER OR
ON THAT DATE WILL BE SELECTED FOR STORE. SYNTAX
'DATE>=moddate' OR 'DATE<=accdate'. (S/R 592)
CAUSE You did not type the date parameter correctly.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
593 MESSAGE THE MONTH PORTION OF SPECIFIED DATE MUST BE
BETWEEN 1 AND 12. DATE SYNTAX
'mm/dd/yy[yy]' (S/R 593)
CAUSE You did not specify a valid number for the month
parameter.
ACTION Check the syntax and enter a valid number.
---------------------------------------------------------------
594 MESSAGE A SLASH "/" WAS EXPECTED TO SEPARATE THE MONTH
(mm) FROM THE DAY (dd) IN THE SPECIFIED DATE.
SYNTAX
'mm/dd/yy[yy]' (S/R 594)
CAUSE You did not include a slash.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
595 MESSAGE DAY PORTION OF DATE IS INVALID. IT MUST BE
BETWEEN 1 AND 28, 29, 30, OR 31 BASED ON THE
SPECIFIED DATE. SYNTAX
'mm/dd/yy[yy]' (S/R 595)
CAUSE You did not include a valid number for day
parameter.
ACTION Check the syntax and enter a valid number for day
parameter.
---------------------------------------------------------------
596 MESSAGE A SLASH "/" WAS EXPECTED TO SEPARATE THE MONTH
(dd) FROM THE YEAR (yy[yy]) IN THE SPECIFIED DATE.
SYNTAX
'mm/dd/yy[yy]' (S/R 596)
CAUSE You did not include a slash.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
597 MESSAGE YEAR PORTION OF DATE IS INVALID. IT MUST BE
GREATER THAN 1970 (70) AND LESS THAN 2127 OR 99 FOR
1999. DATE SYNTAX
'mm/dd/yy[yy]' (S/R 597)
CAUSE You did not include a valid number for the year
parameter.
ACTION Check the syntax and enter a valid number for the
year parameter.
---------------------------------------------------------------
598 MESSAGE EXPECTED MONTH (mm) PORTION OF DATE. SPECIFIED
MONTH VALUE MUST BE BETWEEN 1 AND 12. DATE SYNTAX
'mm/dd/yy[yy]' (S/R 598)
CAUSE You did not include month parameter for date
option.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
599 MESSAGE EXPECTED DAY (dd) PORTION OF DATE. SPECIFIED DAY
VALUE MUST BE BE BETWEEN 1 AND 28, 29, 30, OR 31
BASED ON THE SPECIFIED MONTH. DATE SYNTAX
'mm/dd/yy[yy]' (S/R 599)
CAUSE You did not include day parameter for date option.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
600 MESSAGE EXPECTED YEAR (yy[yy]) PORTION OF DATE.
SPECIFIED YEAR VALUE MUST BE GREATER THAN 1970 (70)
AND LESS THAN 2127 OR 99 FOR 1999. DATE SYNTAX
'mm/dd/yy[yy]' (S/R 600)
CAUSE You did not include year parameter for date option.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
601 MESSAGE 'DATE' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION (S/R 601)
CAUSE Date and listdir options are not allowed on the
same command line.
ACTION Delete either date or listdir option and retype the
command.
---------------------------------------------------------------
611 MESSAGE WARNING: 'PURGE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 611)
CAUSE The PURGE option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
631 MESSAGE WARNING: 'ONERROR' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 631)
CAUSE The ONERROR option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
632 MESSAGE EXPECTED '=error-parm' AFTER 'ONERROR' OPTION
WHERE error-parm IS EITHER 'QUIT' OR 'REDO'. SYNTAX
'ONERR[OR]={QUIT}, OR {REDO} (S/R 632)
CAUSE You did not type the onerror parameter correctly.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
633 MESSAGE UNKNOWN PARAMETER SPECIFIED FOR THE 'ONERROR'
OPTION. EXPECTED EITHER 'QUIT' OR 'REDO'. SYNTAX
'ONERR[OR]={QUIT}, OR {REDO} (S/R 633)
CAUSE You typed a invalid onerror parameter.
ACTION Retype the command and include a valid onerror
parameter.
---------------------------------------------------------------
641 MESSAGE EXPECTED '=(read cnt),(queued writes),(outstanding
writes)' AFTER 'TUNE' OPTION. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 641)
CAUSE You did not type the tune parameter correctly.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
642 MESSAGE EXPECTED '(read cnt),(queued writes),(outstanding
writes)' AFTER 'TUNE=' IN 'TUNE' OPTION. SYNTAX
'TUNE=(read cnt), (queued writes), (outstanding
writes)' (S/R 642)
CAUSE You did not specify a valid tune parameter.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
643 MESSAGE EXPECTED (read cnt) OF 'TUNE' OPTION TO BE
BETWEEN 1 and 12. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 642)
CAUSE The read cnt parameter is not in the correct range.
ACTION Retype the command and include a valid number.
---------------------------------------------------------------
644 MESSAGE EXPECTED '(queued writes),(outstanding writes)'
AFTER 'TUNE=(read cnt)' IN 'TUNE' OPTION. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 644)
CAUSE You did not type the tune parameter correctly.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
645 MESSAGE EXPECTED (queued writes) OF 'TUNE' OPTION TO BE
BETWEEN 1 and 16. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 645)
CAUSE The queued writes parameter is not in the range.
ACTION Retype the command and include a valid number.
---------------------------------------------------------------
646 MESSAGE EXPECTED ',' TO SEPARATE PARAMETERS FOR THE
'TUNE' OPTION. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 646)
CAUSE You did not include a comma.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
647 MESSAGE EXPECTED '(outstanding writes)' AFTER 'TUNE=(read
cnt),(queued writes)' IN 'TUNE' OPTION. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 647)
CAUSE You did not type the tune parameter correctly.
ACTION Check the syntax and retype the command.
---------------------------------------------------------------
648 MESSAGE EXPECTED (outstanding writes) OF 'TUNE' OPTION TO
BE BETWEEN 1 and 4. SYNTAX
'TUNE=(read cnt),(queued writes),(outstanding
writes)' (S/R 648)
CAUSE The outstanding writes parameter is not in the
range.
ACTION Retype the command and include a valid number.
---------------------------------------------------------------
670 MESSAGE WARNING: 'LISTDIR' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 670)
CAUSE The LISTDIR option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
675 MESSAGE 'MAXTAPEBUF' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 675)
CAUSE The MAXTAPEBUF option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
676 MESSAGE 'MAXTAPEBUF' OPTION CANNOT BE USED WITH
'TRANSPORT' TO MPEv. (S/R 676)
CAUSE Maxtapebuf and transport options are not allowed on
the same command line.
ACTION Delete either maxtapebuf or transport option and
retype the command.
---------------------------------------------------------------
681 MESSAGE 'INTER' OPTION CANNOT BE USED WITH 'TRANSPORT' TO
MPEv. (S/R 681)
CAUSE Inter and transport options are not allowed on the
same command line.
ACTION Delete either inter or transport option and retype
the command.
---------------------------------------------------------------
682 MESSAGE WARNING: 'INTER' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 682)
CAUSE The INTER option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
691 MESSAGE 'COMPRESS' OPTION CANNOT BE USED WITH 'TRANSPORT'
TO MPEv. (S/R 691)
CAUSE COMPRESS and TRANSPORT options are not allowed on
the same command line.
ACTION CMSTORE and V/E cannot handle COMPRESS. Delete
either COMPRESS or TRANSPORT option and retype the
command.
---------------------------------------------------------------
692 MESSAGE 'COMPRESS' OPTION REDUNDANTLY SPECIFIED (S/R
692)
CAUSE COMPRESS was entered twice on the same command
line.
ACTION Delete one of the COMPRESS options and retype the
command.
---------------------------------------------------------------
693 MESSAGE EXPECTED '=compressionparm[,compressionparm..]'
AFTER 'COMPRESS' OPTION WHERE compressionparm
IS ONE OF 'HIGH' OR 'LOW'. SYNTAX
'COMPRESS=compressionparm[,compressionparm....]'
(S/R 693)
CAUSE/ ACTION\ Retype the command and include the '=' sign
You left after the COMPRESS option.
out the
'=' sign
-----------after-the-------------------------------------------
COMPRESS
option in
your
694 commanAdE EXPECTED 'compressionparm[,compressionparm..]'
line. AFTER 'COMPRESS=' OPTION WHERE compressionparm
IS ONE OF 'HIGH' OR 'LOW'. SYNTAX
'COMPRESS=compressionparm[,compressionparm....]'
(S/R 694)
CAUSE You typed an invalid parameter for COMPRESS option.
ACTION Retype the command and include a valid parameter
for COMPRESS option.
---------------------------------------------------------------
695 MESSAGE 'HIGH' AND 'LOW' PARAMETERS OF THE 'COMPRESS'
OPTION CANNOT BE SPECIFIED TOGETHER (S/R 695)
CAUSE HIGH and LOW parameters are not allowed on the same
command line.
ACTION Delete either LOW or HIGH parameter and retype the
command.
---------------------------------------------------------------
696 MESSAGE 'LOW' PARAMETER OF 'COMPRESS' OPTION CANNOT BE
REDUNDANTLY SPECIFIED (S/R 696)
CAUSE The parameter LOW was specified twice.
ACTION Delete one of the LOW parameters and retype the
command.
---------------------------------------------------------------
697 MESSAGE 'HIGH' PARAMETER OF 'COMPRESS' OPTION CANNOT BE
REDUNDANTLY SPECIFIED (S/R 697)
CAUSE The parameter HIGH was specified twice.
ACTION Delete one of the HIGH parameters and retype the
command.
---------------------------------------------------------------
699 MESSAGE COMPRESSION OPTION IS NOT AVAILABLE ON YOUR
VERSION OF STORE (S/R 699)
CAUSE This option is available only if TurboSTORE XL is
installed on you system.
ACTION TurboSTORE XL is not part of the fundamental
operating system but may be purchased separately.
---------------------------------------------------------------
701 MESSAGE 'SPLITVS' OPTION CANNOT BE USED WITH THE
'TRANSPORT' TO MPEv (S/R 701)
CAUSE SPLITVS and TRANSPORT options are not allowed on
the same command line.
ACTION Delete SPLITVS or TRANSPORT option and retype the
command.
---------------------------------------------------------------
702 MESSAGE WARNING: 'SPLITVS' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 702)
CAUSE The SPLITVS option was entered more than once.
ACTION Information only.
---------------------------------------------------------------
703 MESSAGE EXPECTED '=volumesetname[,volumesetname...]'
AFTER 'SPLITVS' OPTION SYNTAX
'SPLITVS=volumesetname[,volumesetname...]' (S/R
703)
CAUSE The '=' sign was left out after the SPLITVS option.
ACTION Retype the command and include the '=' sign after
the SPLITVS opti on.
---------------------------------------------------------------
704 MESSAGE INVALID VOLUMESET NAME SPECIFIED FOR
'SPLITVS' OPTION. VOLUMESET NAME MUST
START WITH AN ALPHA "A-Z" AND CONTAIN ONLY
ALPHANUMERIC "A-Z, 0-9", "_" AND "." SYNTAX
'SPLITVS=volumesetname[,volumesetname...]' (S/R
704)
CAUSE The volumeset name specified for SPLITVS is
invalid.
ACTION Retype the command and include a valid volumeset
name.
---------------------------------------------------------------
705 MESSAGE VOLUMESET NAME SPECIFIED FOR 'SPLITVS'
OPTION EXCEEDED THE MAXIMUM ALLOWABLE
LENGTH OF 32 CHARACTERS. SYNTAX
'SPLITVS=volumesetname[,volumesetname...]' (S/R
705)
CAUSE The volumeset name specified for SPLITVS option
includes more than 32 characters.
ACTION Retype the command and make sure the volumeset name
includes 32 characters or less.
---------------------------------------------------------------
706 MESSAGE EXPECTED 'volumesetname[,volumesetname...]' AFTER
'SPLITVS=' WHERE volumesetname IS THE NAME OF
A VOLUME SET THAT IS CURRENTLY MOUNTED
IN A SPLIT STATE ON YOUR SYSTEM. SYNTAX
'SPLITVS=volumesetname[,volumesetname...]' (S/R
706)
CAUSE You have not entered a mounted volumesetname for
SPLITVS option.
ACTION Retype the command and include a mounted
volumesetname with your command.
---------------------------------------------------------------