HP 3000 Manuals HP 3000 Manuals
"Nonclass" Errors (contd.)
Interpreting SYSGEN Messages and Error Codes (contd.)
Input/Output (I/O) Configurator Messages (contd.).
1146 MESSAGE **error** USER device requires all parameters!
CAUSE You have omitted one or more parameters.
ACTION Reenter command with all parameters.
---------------------------------------------------------------
1147 MESSAGE **error** Can't change to id=!
CAUSE You cannot change the ID to this value. Most often
USER.
ACTION Reenter command with proper ID= parameter.
---------------------------------------------------------------
1150 MESSAGE **error** Can't seek to beginning of ioclass file
CAUSE SYSGEN encountered an internal system error in
attempting to initialize the ioclass configuration
file for processing.
ACTION Contact the software personnel responsible for
updating and maintaining these files.
---------------------------------------------------------------
1153 MESSAGE **error** Couldn't determine appropriate class
mode for ldev !
CAUSE SYSGEN has encountered an internal system error in
attempting to obtain the class and mode from the
ioclass configuration file.
ACTION Contact the software personnel responsible for
updating and maintaining these files.
---------------------------------------------------------------
1154 MESSAGE **error** Class ! can't accept ldev
!--incompatible modes
CAUSE You have attempted to include a device whose mode
is incompatible with the other devices in this
class.
ACTION Reenter the command without the device under
question.
---------------------------------------------------------------
1155 MESSAGE **error** Class ! can't accept mode !
CAUSE You have attempted to add a mode that is
incompatible with some or all the devices in this
class.
ACTION Review the conflict and reenter the command with
the proper MODE= parameter.
---------------------------------------------------------------
1156 MESSAGE **error** Too many devices in class !--device not
added
CAUSE A device class can only hold so many
devices--currently 255.
ACTION Remove other devices from class, or create a new
class.
---------------------------------------------------------------
1157 MESSAGE **error** class info is corrupt (class !)
CAUSE The records of the IOCLASS configuration file, that
contains the information for this LDEV, is
corrupted.
ACTION Contact the software personnel responsible for
updating and maintaining these files.
---------------------------------------------------------------
1158 MESSAGE **error** Class VTERM is reserved
CAUSE You cannot assign this name to a class. The system
has reserved its usage for a special purpose.
ACTION Reenter the command with another name for the
class.
---------------------------------------------------------------
1159 MESSAGE **error** Class ! is reserved and cannot be
deleted
CAUSE You have attempted to delete a class that the
system has reserved for its special purpose.
ACTION None.
---------------------------------------------------------------
1160 MESSAGE **error** Class ! is reserved and cannot be
changed
CAUSE You have attempted to modify a class that the
system has reserved for its own special purpose.
ACTION None.
---------------------------------------------------------------
1161 MESSAGE **error** Can't create class ! with mode !--class
not added
CAUSE You have attempted to create a class with an
inconsistent mode. SYSGEN does not accept the
class operation.
ACTION Review the conflict and reenter the command with
the proper mode.
---------------------------------------------------------------
1162 MESSAGE **error** ldev ! does not exist
CAUSE You have attempted to add an LDEV to this class
that does not exist.
ACTION Reenter command with a proper LDEV number.
---------------------------------------------------------------
1163 MESSAGE **error** class file or DCC mode bad--mode is !
CAUSE SYSGEN's class file is in conflict with NMMGR's
configuration file. The displayed mode is in
question.
ACTION Contact software personnel responsible for updating
and maintaining these configuration files.
---------------------------------------------------------------
1164 MESSAGE **error** Can't remove class ! from device !
CAUSE You are attempting to delete a class from a device,
that could cause the system not to be able properly
determine its function.
ACTION Contact software personnel responsible for updating
and maintaining this file.
---------------------------------------------------------------
1165 MESSAGE **error** mpe type only configurable for USER
devices
CAUSE These device types are only associated with the
'classic' 16-bit HP 3000 systems and are honored
only to support those programs ported over from
those systems. Therefore, they are restricted to
USER devices.
ACTION Assigned to USER devices or contact software
personnel who is responsible for maintaining these
file for adivice.
---------------------------------------------------------------
1166 MESSAGE **error** mpe subtype only configurable for USER
devices
CAUSE These device subtypes are only associated with the
'classic' 16-bit HP 3000 systems and are honored
only to support those programs ported over from
those systems. Therefore, they are restricted to
USER devices.
ACTION Assigned to USER devices or contact software
personnel who is responsible for maintaining these
file for advice.
---------------------------------------------------------------
1167 MESSAGE **error** MODE=NLIO not configurable for this
device
CAUSE Setting MODE equal to NLIO is allowed only for
printers and terminals. You probably set it for a
different device.
ACTION Check the configuration and specify an appropriate
device.
---------------------------------------------------------------
1170 MESSAGE **error** Use the adev command to add devices
CAUSE You have attempted to add a device that has not
been defined through the parameters to this
command.
ACTION Add the device prior to using this command.
---------------------------------------------------------------
1171 MESSAGE **error** Can't change this path to be a device
CAUSE You have attempted to change a path designation to
be a device. SYSGEN does not accept the operation.
ACTION None.
---------------------------------------------------------------
1172 MESSAGE **error** Can't change ldevs to paths or paths to
ldevs
CAUSE You have attempted to interchange LDEVs and paths.
SYSGEN does not accept the operation.
ACTION Reenter the command with the proper parameters.
---------------------------------------------------------------
1173 MESSAGE **error** Use the mdev command to modify devices
CAUSE You have attempted to change some of the device
configuration elements within this command. SYSGEN
does not accept the operation.
ACTION None.
---------------------------------------------------------------
1180 MESSAGE **error** OUTDEV invalid
CAUSE You have attempted to designate a device that is
incompatible with OUTDEV requirements. SYSGEN does
not accept the operation.
ACTION Reenter the command with the proper device.
---------------------------------------------------------------
Miscellaneous (MISC) Configurator Messages.
---------------------------------------------------------------
0500 MESSAGE **warning** # of rins must be at least !--misc
value changed.
CAUSE You have requested a number of RINs that is below
the minimum.
ACTION Reenter the command with the minimum value.
---------------------------------------------------------------
0501 MESSAGE **warning** # of global rins must be at least
!--misc value changed.
CAUSE You have requested a number global RINs that is
less than the minimum.
ACTION Reenter the command with the minimum value.
---------------------------------------------------------------
0502 MESSAGE **warning** rin ! does not exist
CAUSE You have entered a RIN that the system does not
recognize.
ACTION Reenter the command with the proper RIN.
---------------------------------------------------------------
0503 MESSAGE **warning** Unless you've made a tape, any rins
CAUSE This warning is to let you know that the deleted
RINs only disappear upon a system update.
ACTION Create boot tape and update the system.
---------------------------------------------------------------
0504 MESSAGE you've deleted will no longer be deleted.
CAUSE This is the second half of message above.
ACTION None.
---------------------------------------------------------------
0510 MESSAGE **warning** default NM stack size cannot be
greater than maximum.
CAUSE You have requested a default native mode stack size
that is greater than the specified maximum value.
ACTION Either reenter the command with a valid stack size
or set to the maximum.
---------------------------------------------------------------
0511 MESSAGE **warning** default CM stack size cannot be
greater than maximum.
CAUSE You have requested a default compatibility mode
stack size that is greater than the specified
maximum value.
ACTION Either reenter the command with a valid stack size
or set to the maximum.
---------------------------------------------------------------
0512 MESSAGE **warning** default HEAP size cannot be greater
than maximum.
CAUSE You have requested a default heap size greater than
the specified maximum value.
ACTION Either reenter the command with a valid heap size
or set to the maximum.
---------------------------------------------------------------
0514 MESSAGE fault reduced to !
CAUSE This message displays resulting default for message
above.
ACTION None.
---------------------------------------------------------------
0523 MESSAGE **warning** DEFAULT NM STACK must be a multiple
of 4096. New value is !.
CAUSE The nm parameter must be a multiple of 4096
(page_size).
ACTION SYSGEN has rounded DEFAULT NM STACK up to next
multiple of 4096. No further action required.
---------------------------------------------------------------
0524 MESSAGE **warning** MAXIMUM NM STACK must be a multiple
4096. New value is !.
CAUSE The maxnm parameter must be a multiple of 4096
(page_size).
ACTION SYSGEN has rounded MAXIMUM NM STACK up to next
multiple of 4096. No further action required.
---------------------------------------------------------------
0525 MESSAGE **warning** DEFAULT HEAP must be a multiple of
4096. New value is !.
CAUSE The heap parameter must be a multiple of 4096
(page_size).
ACTION SYSGEN has rounded DEFAULT HEAP up to next multiple
of 4096. No further action required.
---------------------------------------------------------------
0526 MESSAGE **warning** MAXIMUM NM HEAP must be a multiple of
4096. New value is !.
CAUSE The maxheap parameter must be a multiple of 4096
(page_size).
ACTION SYSGEN has rounded MAXIMUM NM HEAP up to next
multiple of 4096. No further action required.
---------------------------------------------------------------
1000 MESSAGE **error** can't read MISC configuration data
CAUSE SYSGEN encountered an error in trying to read the
miscellaneous configuration data file.
ACTION Refer to the file system error.
---------------------------------------------------------------
1001 MESSAGE **error** system ID too long
CAUSE You have entered a system ID that has too many
characters. The limit is eight.
ACTION Reenter the command with the proper system ID
value.
---------------------------------------------------------------
1005 MESSAGE **error** can't display parameter ! in misc
display table
CAUSE SYSGEN has encountered an error in trying to
display this parameter from the miscellaneous
configuration data file.
ACTION Contact software personnel responsible for updating
and maintaining these files.
---------------------------------------------------------------
1007 MESSAGE **error** prompt too long
CAUSE You have requested a string for the prompt that has
too many characters for the configuration file
entry.
ACTION Reenter the command with a shorter string.
---------------------------------------------------------------
1008 MESSAGE **error** Can't get an extra data segment for rin
table
CAUSE Same as message.
ACTION Refer to system error message for action.
---------------------------------------------------------------
1009 MESSAGE **error** Can't initialize extra data segment for
rin table
CAUSE SYSGEN has encountered an internal system error in
attempting to initialize the new space granted for
RIN table expansion.
ACTION Refer to system or file system error for action.
---------------------------------------------------------------
1010 MESSAGE **error** Can't list rins
CAUSE SYSGEN has encountered a system error in trying to
list the RINs as requested.
ACTION Refer to system error or file system error message
for the action to undertake.
---------------------------------------------------------------
1011 MESSAGE **error** Can't alter extra data segment for rin
table
CAUSE SYSGEN has encountered an internal system error in
trying to make changes in the new area of the RIN
table.
ACTION Refer to system error message for the action.
---------------------------------------------------------------
1012 MESSAGE **error** Can't read from extra data segment for
rin table
CAUSE SYSGEN has encountered a system error in trying to
read the RIN table in trying to process your
command.
ACTION Refer to the system or file system error for the
action.
---------------------------------------------------------------
1013 MESSAGE **error** Can't free extra data segment for rin
table
CAUSE SYSGEN has encountered a system error in trying to
release a portion of the RIN table in trying to
process your command.
ACTION Refer to the system error for the action.
---------------------------------------------------------------
1014 MESSAGE **error** Can't get rin table size from extra
data segment
CAUSE SYSGEN has encountered as error in trying to obtain
the RIN table size while processing your command.
ACTION Refer to the system error for action.
---------------------------------------------------------------
1020 MESSAGE **error** can't write MISC configuration data
CAUSE SYSGEN has encountered an error while trying to
write to the miscellaneous configuration data file.
ACTION Refer to the system or file systems error for
action.
---------------------------------------------------------------
1021 MESSAGE **error** Only the factory can change this.
CAUSE You have attempted to change an item in the
miscellaneous configuration data that is reserved
for factory maintenance.
ACTION None.
---------------------------------------------------------------
1025 MESSAGE **error** sysprompt string in MISC configuration
corrupt!
CAUSE SYSGEN has encountered an error in trying to obtain
the system prompt string value.
ACTION Contact software personnel responsible for updating
and maintaining these files.
---------------------------------------------------------------
1026 MESSAGE **error** ciprompt string in MISC configuration
corrupt!
---------------------------------------------------------------
1030 MESSAGE **error** configuration files incompatable with
this version of SYSGEN
---------------------------------------------------------------
1031 MESSAGE SYSGEN version = ! Config files version = !
---------------------------------------------------------------