HP 3000 Manuals HP 3000 Manuals
Class Errors (contd.)
Class Error B: Initialization Messages
When the system halts, the reason for the halt can be seen on the SPU
control panel status display (hex display). The first number is the
source of the halt call, and following it are numbers of the form 0nxx
where n is a number that starts at 1 and increments. The reason can be
interpreted by stringing the xx values together to form a number.
When the monitor is the source of the halt, the first number is B000.
System abort uses B007. The following codes relate the cause of the
error.
---------------------------------------------------------------
0001 MESSAGE No message. System halts. (E)
thru
0019
CAUSE The break handler (to RDB) was reentered.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0020 MESSAGE No message. System halts. (E)
CAUSE A break zero (0) instruction is encountered without
RDB.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0021 MESSAGE No message. System halts. (E)
CAUSE An unknown high priority machine check occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0022 MESSAGE No message. System halts. (E)
CAUSE A nonrecoverable low priority machine check occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0028 MESSAGE No message. System halts. (E)
CAUSE Reinit_iodc fails to read entry_init.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
0029 MESSAGE No message. System halts. (E)
CAUSE Reinit_iodc fails to read entry_io.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0030 MESSAGE No message. System halts. (E)
CAUSE Image does not fit the first memory controller.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
003E MESSAGE No message. System halts. (E)
CAUSE A nonrecoverable taken branch or break trap occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
003F MESSAGE No message. System halts. (E)
CAUSE A bad instruction is received from RDB.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
0040 MESSAGE No message. System halts. (E)
CAUSE A configured module is lost on powerfail.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0041 MESSAGE No message. System halts. (E)
CAUSE A bus converter is lost on powerfail.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0042 MESSAGE No message. System halts. (E)
CAUSE A bus converter was added on powerfail.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
0043 MESSAGE No message. System halts. (E)
CAUSE memory was added on powerfail.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0044 MESSAGE No message. System halts. (E)
CAUSE A module was added on powerfail and it generated an
address conflict.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0045 MESSAGE No message. System halts. (E)
CAUSE Memory self-test fails in map_system_state.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0046 MESSAGE No message. System halts. (E)
thru
004E
CAUSE Error occurs on call to entry_init in reinit_iodc.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
005B MESSAGE No message. System halts. (E)
thru
005F
CAUSE The parallel card driver (RDB communications)
encounters an error.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0066 MESSAGE No message. System halts. (E)
thru
006E
CAUSE Error occurs on call to entry_io in CONSOLE_READ or
CONSOLE_WRITE.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0080 MESSAGE No message. System halts. (E)
thru
0099
CAUSE A trap which neither RDB nor the operating system
is prepared for occurs.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
00F1 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable instruction TLB error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F2 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable data TLB error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F3 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable bus address error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F4 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable bus error on I/O space occurs.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
00F5 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable bus error on memory read or write
occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F6 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable bus error I/O space write occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F7 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable bus error with slave processor
occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00F8 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable cache tag error occurs.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
00F9 MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable data cache error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00FA MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable assist (coprocessor) error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
00FB MESSAGE No message. System halts. (E)
CAUSE Nonrecoverable instruction cache error occurs.
ACTION Try rebooting the system. If error recurs, contact
your Hewlett-Packard Support Representative.
---------------------------------------------------------------
0131 MESSAGE Illegal configuration.
CAUSE You may have an illegal configuration, such as
trying to run MPE/iX on an 800-series CPU.
ACTION CAll your HP service representative. Do not try to
INSTALL or UPDATE or the system will halt with a
message, B0000 DEAD 0131.
---------------------------------------------------------------
Class Error C: Bootstrap Display Codes
Bootstrap display codes take the form:
Cxxx
where:
xxx = detailed error number.
---------------------------------------------------------------
C20x MESSAGE None. (I)
CAUSE First memory controller initialized. x = MC
mid-bus slot number.
ACTION None.
---------------------------------------------------------------
C201 MESSAGE None. System halts. (E)
CAUSE No memory controller is found.
ACTION Contact your Hewlett-Packard Support
Representative.
---------------------------------------------------------------
C40x MESSAGE None. (I)
CAUSE Primary console path initialized. x = CIO bus slot
number.
ACTION None.
---------------------------------------------------------------
C54x MESSAGE None. (I)
CAUSE Primary boot path initialized. x = CIO bus slot
number.
ACTION None.
---------------------------------------------------------------
C58x MESSAGE None. (I)
CAUSE Primary boot path I/O. x = CIO bus slot number.
ACTION None.
---------------------------------------------------------------
C5FF MESSAGE None. (I)
CAUSE Launch IPL that has been read from primary boot
path. x = CIO bus slot number.
ACTION None.
---------------------------------------------------------------
C60x MESSAGE None. (I)
CAUSE Alternate (hard-wired) console path initialized. x
= CIO bus slot number.
ACTION None.
---------------------------------------------------------------
C74x MESSAGE None. (I)
CAUSE Alternate boot path initialized. x = CIO bus slot
number.
ACTION None.
---------------------------------------------------------------
C78x MESSAGE None. (I)
CAUSE Alternate boot path I/O. x = CIO bus slot number.
ACTION None.
---------------------------------------------------------------
C7FF MESSAGE None. (I)
CAUSE Launch IPL that has been read from alternate boot
path.
ACTION None.
---------------------------------------------------------------