HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
345 MESSAGE UNKNOWN LOGICAL DEVICE. (CIERR 345)
CAUSE You have entered something that the system does not
recognize as a logical device.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
350 MESSAGE LOCKWORD SUPPLIED BY USER DIFFERENT FROM FILE.
(CIERR 350)
CAUSE You have specified an incorrect lockword.
ACTION Check for syntax or spelling errors and reenter the
command. If you get the same message, check with
the creator of the file or the system manager to
verify the lockword.
---------------------------------------------------------------
351 MESSAGE ACTION DISALLOWED SINCE NOT CREATOR OF FILE.
(CIERR 351)
CAUSE You must be the creator of the file in order to use
the ALTSEC command to change security restrictions.
ACTION Information only.
---------------------------------------------------------------
353 MESSAGE DISC I/O ERROR RELATED TO FILE ERROR ACCESS.
(CIERR 353)
CAUSE An error was encountered by the input/output device
when trying to get the file label.
ACTION Re-issue command. If error message occurs again,
contact your system manager.
---------------------------------------------------------------
354 MESSAGE SECURE EXPECTED ONLY THE FILE NAME. (CIERR 354)
CAUSE You entered more data than the SECURE command can
deal with; it expects only a file name.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
355 MESSAGE SECURE REQUIRES ONE PARAMETER, A FILE NAME.
(CIERR 355)
CAUSE You failed to specify a file name after the command
name.
ACTION Reenter the command, specifying a file name.
---------------------------------------------------------------
356 MESSAGE UNABLE TO ACCESS FILE !. (CIERR 356)
CAUSE You have named a file that the system cannot access
for you. There are a number of possible reasons
why access is being denied.
ACTION You can use the LISTF command to examine the
security restrictions on files; to review the LISTF
command syntax, invoke the online Help Facility or
refer to the MPE/iX Commands Reference Manual,
(32650-90003). If you are denied access
information about that file, contact the "owner" of
the file to arrange for access, or discuss the
situation with your system manager.
---------------------------------------------------------------
360 MESSAGE EXPECTED EITHER FILE DESIGNATOR OR "@". (CIERR
360)
---------------------------------------------------------------
361 MESSAGE EXPECTED EITHER LINE DESIGNATOR OR "@". (CIERR
361)
---------------------------------------------------------------
362 MESSAGE FILE COMMAND NOT FOUND. (CIWARN 362)
---------------------------------------------------------------
370 MESSAGE MAXIMUM OF 3 PARAMETERS. (CIERR 370)
---------------------------------------------------------------
371 MESSAGE EXPECTED "TEMP". (CIERR 371)
CAUSE This command expects to receive TEMP as a
parameter; evidently, you did not specify TEMP
after a delimiter.
ACTION Reenter the command and supply TEMP.
---------------------------------------------------------------
372 MESSAGE OPEN FAILED ON FILE !, NOT RENAMED. (CIERR 372)
CAUSE You did not meet the security requirements imposed
on this file.
ACTION Check the capabilities assigned to your logon user,
and security measures imposed on the file. Consult
with your account manager or system manager.
---------------------------------------------------------------
373 MESSAGE RENAME FAILED DUE TO FILE SYSTEM ERROR, NOT
RENAMED.(CIERR 373)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representatuive.
---------------------------------------------------------------
374 MESSAGE CLOSE OF RENAMED FILE FAILED. (CIERR 374)
---------------------------------------------------------------
375 MESSAGE EXPECTED OLD NAME OF FILE HERE. (CIERR 375)
---------------------------------------------------------------
376 MESSAGE EXPECTED NEW NAME FOR FILE AS SECOND PARAMETER.
(CIERR 376)
CAUSE You did not supply a new name for the file you are
trying to rename.
ACTION Reenter the command and supply a file name.
Consult with online Help Facility and the MPE/iX
Commands Reference Manual, (32650-90003) for more
information.
---------------------------------------------------------------
380 MESSAGE PURGE HANDLES ONLY ONE FILE AT A TIME. (CIERR
380)
CAUSE You supplied more than two parameters to the PURGE
command.
ACTION Check for extraneous delimiters that you may have
typed and reenter the command. Consult with online
Help Facility and the MPE/iX Commands Reference
Manual, (32650-90003) for more information.
---------------------------------------------------------------
381 MESSAGE REQUIRES FILE NAME TO BE PURGED. (CIERR 381)
CAUSE You did not supply a file name to the PURGE
command.
ACTION Reenter the command and supply a file name.
Consult with online Help Facility and the MPE/iX
Commands Reference Manual, (32650-90003) for more
information.
---------------------------------------------------------------
382 MESSAGE EXPECTED "TEMP". (CIERR 382)
CAUSE This command expects to receive TEMP as a
parameter; evidently, you did not specify TEMP
after a delimiter.
ACTION Reenter the command and supply TEMP.
---------------------------------------------------------------
383 MESSAGE FILE ! NOT FOUND, NO PURGE DONE. (CIWARN 383)
CAUSE The specified file was not found in the group and
account.
ACTION Check for syntax or spelling errors and try
reentering the command. For more information about
locating files in groups/accounts other than your
logon group/account, read about the LISTF command
in the online Help facility or MPE/iX Commands
Reference Manual, (32650-90003), or read about
files in the General User's Reference Manual.
---------------------------------------------------------------
384 MESSAGE UNABLE TO PURGE FILE !. (CIERR 384)
CAUSE The file you specified is either being used, or you
do not have the appropriate capabilities to purge
it.
ACTION Check the output of LISTF command to see if the
file is being used. If not, check to see if you
currently have the appropriate capabilities to
purge the file. Consult with your account manager
or system manager.
---------------------------------------------------------------
385 MESSAGE UNABLE TO PURGE FILE !. (CIERR 385)
---------------------------------------------------------------
386 MESSAGE WARNING: EXPECTED COMMA, FOUND SEMICOLON.
(CIWARN 386)
CAUSE You specified a semicolon ";" in place of a comma
",". The system corrected the problem and executed
your request.
ACTION No action is required.
---------------------------------------------------------------
390 MESSAGE SAVE HANDLES ONLY ONE FILE AT A TIME. (CIERR
390)
CAUSE You supplied more than two parameters to the SAVE
command.
ACTION Check for extraneous delimiters that you may have
typed and reenter the command. Consult with online
Help Facility and the MPE/iX Commands Reference
Manual, (32650-90003) for more information.
---------------------------------------------------------------
391 MESSAGE REQUIRES NAME OF FILE TO BE SAVED. (CIERR 391)
CAUSE You did not supply a file name to the SAVE command
to which the temporary file should be saved.
ACTION Reenter the command and supply a file name.
Consult with online Help Facility and the MPE/iX
Commands Reference Manual, (32650-90003) for more
information.
---------------------------------------------------------------
392 MESSAGE EXPECTED "$OLDPASS". (CIERR 392)
---------------------------------------------------------------
393 MESSAGE UNABLE TO ACCESS $OLDPASS AS FILE !. (CIERR 393)
CAUSE Evidently, the $OLDPASS file does not exist.
ACTION Check the output of LISTFTEMP to verify whether
$OLDPASS exists or not. If it doe not, recompile
your program and then save $OLDPASS. Consult with
online Help Facility or the MPE/iX Commands
Reference Manual, (32650-90003) for more
information.
---------------------------------------------------------------
394 MESSAGE UNABLE TO SAVE $OLDPASS PERMANENTLY AS FILE !,
SAVED IT TEMPORARY INSTEAD. (CIERR 394)
CAUSE Evidently, the file name you supplied as the second
parameter to SAVE command already exists.
ACTION Look for accompanying error messages. Reenter the
command, supply the new name assigned to $OLDPASS,
and specify a file name that does not exist as the
second parameter to SAVE.
---------------------------------------------------------------
395 MESSAGE UNABLE TO ACCESS TEMPORARY FILE !. (CIERR 395)
CAUSE You specified a temporary file that does not exist.
ACTION Check the output of LISTFTEMP for file existence,
syntax or spelling errors and reenter the command.
For more information about the command syntax,
invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
396 MESSAGE UNABLE TO CLOSE FILE ! AS A PERMANENT FILE, LEFT
IT AS A TEMPORARY FILE. (CIERR 396)
CAUSE A permanent file exists with the same name as the
temporary file you are trying to save.
ACTION Choose a different permanent name and reenter the
command.
---------------------------------------------------------------
397 MESSAGE WARNING: SAVE EXPECTED COMMA, FOUND SEMICOLON.
(CIWARN 397)
CAUSE You specified a semicolon ";" in place of a comma
",." Your request was not granted and the temporary
file was not saved.
ACTION Reenter the command and supply a comma instead of a
semicolon.
---------------------------------------------------------------
398 MESSAGE UNABLE TO SAVE $OLDPASS AS SPECIFIED FILE, SAVED
AS ! (CIERR 398)
CAUSE Evidently, the file name you supplied as the second
parameter to SAVE command already exists.
ACTION Look for accompanying error messages. Reenter the
command, supply the new name assigned to $OLDPASS,
and specify a file name that does not exist as the
second parameter to SAVE.
---------------------------------------------------------------
400 MESSAGE RELEASE EXPECTED ONLY THE FILE NAME. (CIERR 400)
CAUSE You supplied more parameters than required.
ACTION Reenter the command and supply only the file name.
---------------------------------------------------------------
401 MESSAGE RELEASE REQUIRES ONE PARAMETER, A FILE NAME.
(CIERR 401)
CAUSE You did not supply the name of the file to be
released.
ACTION Reenter the command and supply a file name.
---------------------------------------------------------------
410 MESSAGE ALTSEC REQUIRES AT LEAST A FILE NAME. (CIERR 410)
CAUSE You did not specify a file name. You must provide
at least a file name in order to change any
security restrictions.
ACTION Provide a file name.
---------------------------------------------------------------
411 MESSAGE EXTRANEOUS PARAMETER TO ALTSEC. (CIERR 411)
CAUSE The ALTSEC command does not recognize one of the
parameters that you specified on the command line.
ACTION Check the MPE/iX Commands Reference Manual,
(32650-90003) for the valid ALTSEC command
parameters.
---------------------------------------------------------------
420 MESSAGE LEVEL OF LISTF MUST BE -3,-1,0,1,2,3,4,6. (CIWARN
420)
CAUSE Evidently, you specified a level number that is not
one of those listed. The system provided you with
the same listing produced by level two.
ACTION No action is required, unless you did not obtain
the desired information from the default LISTF
display.
---------------------------------------------------------------
422 MESSAGE LISTF ,-1 OR -3 REQUIRES SM CAPABILITY. (CIERR
422)
CAUSE Evidently, you do not have system manager (SM)
capability which is required to obtain the
information displayed by these levels.
ACTION Consult with your system manager.
---------------------------------------------------------------
423 MESSAGE LISTF ,-1 OR -3 REQUIRES AM CAPABILITY. (CIERR
423)
CAUSE Evidently, you do not have Account Manager (AM)
capability which is required to obtain the
information displayed by these levels.
ACTION Consult with your system manager.
---------------------------------------------------------------
424 MESSAGE EXPECTED ";", FOLLOWED BY LIST FILE NAME. (CIERR
424)
CAUSE You did not supply a semicolon followed by a file
name.
ACTION Consult with online Help Facility and the MPE/iX
Commands Reference Manual, (32650-90003) for
correct syntax of LISTF and reenter the command.
---------------------------------------------------------------
425 MESSAGE FILE SYSTEM ERROR ! ENCOUNTERED ON LIST FILE.
(CIERR 425)
CAUSE The file system code detected an error and notified
the command interpreter.
ACTION Look for accompanying error message, and reenter
the command.
---------------------------------------------------------------
426 MESSAGE UNIDENTIFIABLE FILESET NAME. (CIERR 426)
---------------------------------------------------------------
427 MESSAGE ONLY 3 PARAMETERS TO LISTF. (CIERR 427)
CAUSE Evidently, you supplied more parameters than
expected by LISTF.
ACTION Consult with online Help Facility and the MPE/iX
Commands Reference Manual, (32650-90003) for
correct syntax of LISTF and reenter the command.
---------------------------------------------------------------
428 MESSAGE I/O ERROR ON DISK WHILE GETTING FILE LABEL
INFORMATION. (CIERR 428)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representatuive.
---------------------------------------------------------------
429 MESSAGE GROUP'S HOME VOLUME SET (!) NOT MOUNTED AND/OR
GROUP NOT BOUND TO HOME VOLUME SET. CANNOT DISPLAY
GROUP'S FILES. (CIWARN 429)
---------------------------------------------------------------
430 MESSAGE LISTF STOPPED (CIERR 430)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representatuive.
---------------------------------------------------------------
431 MESSAGE NO FILES FOUND IN FILE-SET (CIWARN 431)
CAUSE There are no files that match that pattern.
ACTION No action is required, unless you are certain that
some files exist that match that pattern. Check
for misspellings and whether the wildcard
character(s) are in the appropriate position, and
reenter the command.
---------------------------------------------------------------
432 MESSAGE NO GROUPS FOUND IN GROUP-SET (CIWARN 432)
CAUSE There are no groups that match that pattern.
ACTION No action is required, unless you are certain that
some groups exist that match that pattern. Check
for misspellings and whether the wildcard
character(s) are in the appropriate position, and
reenter the command.
---------------------------------------------------------------
433 MESSAGE NO ACCOUNTS FOUND IN ACCOUNT-SET (CIWARN 433)
CAUSE There are no accounts that match that pattern.
ACTION No action is required, unless you are certain that
some accounts exist that match that pattern. Check
for misspellings and whether the wildcard
character(s) are in the appropriate position, and
reenter the command.
---------------------------------------------------------------
434 MESSAGE NO USERS FOUND IN USER-SET (CIWARN 434)
CAUSE There are no user names that match that pattern.
ACTION No action is required, unless you are certain that
some user names exist that match that pattern.
Check for misspellings and whether the wildcard
character(s) are in the appropriate position, and
reenter the command.
---------------------------------------------------------------