HP 3000 Manuals HP 3000 Manuals
Error, Warning, and Status Messages (contd)
120 MESSAGE SUBSET OPTION: SUBSET STARTS OVER EOF BOUNDARY
CAUSE The specified subset extends over an end-of-file
mark or a tape mark boundary.
ACTION Change the specified subset definition to a valid
one and try the operation again.
---------------------------------------------------------------
123 MESSAGE SUBSET OPTION: THIS INPUT DEVICE DOES NOT
BACKSPACE
CAUSE The specified subset requires backspacing in the
fromfile, but the device for that file is not a
disk or magnetic tape.
ACTION Check the MPE/iX FILE command associated with the
fromfile and its backreference.
---------------------------------------------------------------
124 MESSAGE READ ERROR IN FROMFILE AT RECORD RECNUM
CAUSE An error occurred while spacing through the
fromfile in search of the start of a subset.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
125 MESSAGE SUBSET OPTION: NUMERIC SUBSET IS EMPTY
CAUSE A subset specified by starting-record-number,
number-of records and/or last-record-number does
not exist, or contains no data.
ACTION Change the specified subset definition to a valid
one and try the operation again.
---------------------------------------------------------------
126 MESSAGE VERIFY OPTION: ERROR WHILE REWINDING FROMFILE
CAUSE An error occurred while spacing backward to the
beginning of the fromfile at the start of a
"verify" operation.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
127 MESSAGE VERIFY OPTION: ERROR WHILE REWINDING TOFILE
CAUSE An error occurred while spacing backward to the
beginning of the tofile at the start of a "verify"
operation.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
128 MESSAGE EOF FOUND WHILE SPACING IN FROMFILE
CAUSE An end-of-file mark was encountered while spacing
through the fromfile in search of the start of a
subset.
ACTION Make sure that the starting record number for the
subset does not exceed the number of records in the
file.
---------------------------------------------------------------
129 MESSAGE EOF FOUND WHILE SPACING IN TOFILE
CAUSE An end-of-file mark was encountered while spacing
through the tofile in search of the start of a
subset during a "compare" or "verify" operation.
ACTION "Compare" operation: the fromfile and tofiles are
not identical. Display the tofile to determine
what it actually contains.
"Verify" operation: the "copy" operation was not
performed correctly. Retry the operation.
---------------------------------------------------------------
130 MESSAGE FCHECK ERROR
CAUSE The FCHECK intrinsic failed.
ACTION Notify your system manager.
---------------------------------------------------------------
131 MESSAGE ERROR WHILE WRITING EOF TOFILE
CAUSE An error occurred while writing an end-of-file mark
in the tofile.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
132 MESSAGE VERIFY OPTION: ERROR WHILE SPACING IN THE
FROMFILE
CAUSE An error occurred while writing an end-of-file mark
in the fromfile during a "verify" operation.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
133 MESSAGE VERIFY OPTION: ERROR WHILE SPACING IN THE TOFILE
CAUSE An error occurred while writing an end-of-file mark
in the tofile during a "verify" operation.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
134 MESSAGE FOUND EOF IN TOFILE
CAUSE FCOPY has performed the specified operation but has
filled the tofile before completing the operation.
ACTION The tofile was not large enough. Use the MPE/iX
LISTF filename,2 command to determine the tofile's
size and then increase its size (using the MPE/iX
PURGE and BUILD commands) and retry the operation.
To copy from one file to a smaller file, use
SUBSET=.
---------------------------------------------------------------
135 MESSAGE WRITE ERROR TO TOFILE
CAUSE An error occurred while writing to the tofile.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
136 MESSAGE READ ERROR FROM TOFILE
CAUSE An error occurred while reading from the tofile
during a "compare" or "verify" operation.
ACTION "Compare" operation: retry the operation. If the
error persists, you must try to recreate the
tofile.
"Verify" operation: retry the operation.
---------------------------------------------------------------
137 * MESSAGE WARNING: AN UNLABELED TAPE OPERATION ENDS ON AN
ERROR
CAUSE An operation involving a magnetic tape fromfile was
terminated by reading beyond the end of valid data
rather than by sensing an end-of-file mark.
ACTION This is not an error. You can avoid this message
by specifying FILES=n where n is the number of
files on the tape.
---------------------------------------------------------------
138 MESSAGE TITLE OPTION: TITLE TOO LONG
CAUSE The title specified for the "list" function is
longer than the 70 characters allowed, or it
extends over more than one line (record).
ACTION In a job: correct the command and re-submit the
job.
In a session: re-enter the command using the
correct format.
---------------------------------------------------------------
139 MESSAGE DUMP OPTION: TOFILE RECSIZE NOT WITHIN LEGAL
LIMIT
CAUSE A file display was directed to an intermediate
storage device with an incorrect record size. That
record size must be greater than 60 bytes (30
words).
ACTION Change the record size of the intermediate storage
file (using the MPE/iX PURGE and BUILD commands) so
that it is within the allowed range, and then retry
the operation.
---------------------------------------------------------------
140 MESSAGE COMPARE OR VERIFY OPTION: OPERATION FAILS;
DIFFERENT FIXED RECSIZES
CAUSE The "compare" or "verify" operation was not
attempted because the record sizes of the tofile
and fromfile are not identical.
ACTION "Compare" operation: none. The "compare"
operation revealed that the fixed record sizes of
the two files are not identical.
"Verify" operation: change the record size of the
tofile (using the MPE/iX PURGE and BUILD commands)
so that it is the same as that of the fromfile and
then retry the operation.
---------------------------------------------------------------
141 ** MESSAGE COMPARE BEGINS
CAUSE The comparison phase of a "verify" operation has
begun.
ACTION None.
---------------------------------------------------------------
143 * MESSAGE WARNING: FROMFILE IS EMPTY
CAUSE The fromfile contained no data. Nothing was copied
or compared.
ACTION None. You may inadvertently have specified the
wrong file as the fromfile.
---------------------------------------------------------------
144 MESSAGE NEW OPTION: FILE ALREADY EXISTS
CAUSE The tofile named for the "new file" function
already exists in the specified (or implied) group
and account.
ACTION Change the name of the tofile and try the operation
again.
---------------------------------------------------------------
145 MESSAGE BACKSPACE ERROR IN FROMFILE
CAUSE An error occurred while spacing backward to the
beginning of the fromfile or a subset within it.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
146 MESSAGE CANNOT OPEN TEMPORARY LABEL FILE
CAUSE This may indicate a lack of space in your account.
ACTION Allocate more space in the account.
---------------------------------------------------------------
147 MESSAGE WRITE ERROR IN TEMPORARY LABEL FILE
CAUSE An error occurred while writing to the temporary
label file.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
148 MESSAGE READ ERROR IN TEMPORARY LABEL FILE
CAUSE An error occurred while reading from the fromfile.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
149 MESSAGE OVERFLOW IN TEMPORARY LABEL FILE
CAUSE There are more labels in the fromfile than can be
copied.
ACTION Use the NOUSERLABELS function to copy files without
labels.
---------------------------------------------------------------
150 MESSAGE READ ERROR IN FROMFILE LABELS
CAUSE An error occurred while reading labels in the
fromfile.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
151 MESSAGE WRITE ERROR IN TOFILE LABELS
CAUSE An error occurred while reading labels in the
tofile.
ACTION Check the syntax of your command and retry the
operation.
---------------------------------------------------------------
152 MESSAGE OVERFLOW IN TOFILE LABELS
CAUSE There are too many labels in the fromfile to be
copied to the tofile.
ACTION If the tofile is an old file, retry the operation
using the NOUSERLABELS option. If it is a new
file, use the NEW option.
---------------------------------------------------------------
153 MESSAGE ATTEMPT TO BACKSPACE OVER FROMFILEBOF
CAUSE The negative number specified in a "skip
end-of-file" function for the fromfile is too
large.
ACTION Change the number to a smaller one to avoid
skipping too many files back.
---------------------------------------------------------------
154 MESSAGE ATTEMPT TO BACKSPACE OVER TOFILEBOF
CAUSE The negative number specified in a "skip
end-of-file" function for the tofile is too large.
ACTION Change the number to a smaller one to avoid
skipping too many files back.
---------------------------------------------------------------
155 MESSAGE DEBLOCK OPTION: INVALID LOGICAL RECORD LENGTH
CAUSE Specified logical record length is greater than the
physical record length of the fromfile, or it is
equal to zero.
ACTION Correct the DEBLOCK option and retry the operation.
Make sure that there is a minus sign in front of
the logical record length if it is specified in
bytes.
---------------------------------------------------------------
200 * MESSAGE WARNING: FROMFILE RECSIZE IS number type,TOFILE
RECSIZE IS number type
CAUSE The record sizes of the fromfile and tofile are not
identical.
ACTION In a job: FCOPY performs the specified operation
despite the conflict.
In a session: you are given the choice of whether
or not to continue the operation.
If the record size of the fromfile is larger than
that of the tofile, the "from" records would be
truncated. If the record size of the tofile is
larger than that of the fromfile, the content of
the excess byte positions in the "to" records is
unpredictable.
---------------------------------------------------------------
201 * MESSAGE WARNING: FROMFILE IS ASCII, TOFILE IS BINARY OR
WARNING: FROMFILE IS BINARY, TOFILE IS ASCII
CAUSE The data formats of the fromfile and tofile are not
identical.
ACTION In a job: FCOPY performs the specified operation
despite the conflict.
In a session: you are given the choice of whether
or not to continue the operation.
---------------------------------------------------------------
301 MESSAGE READ ERROR IN FROMFILE AT RECORD recnum
CAUSE An error occurred while reading from the fromfile
at the record number displayed (recnum).
ACTION Retry the operation. If the error persists, use
the SUBSET function to copy all of the file except
the erroneous record.
---------------------------------------------------------------
302 MESSAGE VERIFY OPTION: RAN OUT OF VERIFY ERRORS AT
FROMFILE RECORD recnum
CAUSE The "verify" function was terminated because the
specified maximum number of errors has been
exceeded at the record number displayed (recnum).
ACTION Specify a larger number-of-errors parameter and
retry the operation.
---------------------------------------------------------------
303 MESSAGE RAN OUT OF IGNERRS AT FROMFILESREC
CAUSE More errors were found in the fromfile than are
permitted by the IGNERR option.
ACTION Specify a larger number-of-errors parameter and
retry the operation.
---------------------------------------------------------------
304 MESSAGE COMPARE OPTION: RAN OUT OF COMPARE ERRORS AT
FROMFILE RECORD recnum
CAUSE The "compare" function was terminated because the
specified maximum number of errors has been
exceeded at the record number displayed (recnum).
ACTION Retry the operation specifying a larger
number-of-errors parameter.
---------------------------------------------------------------
601 MESSAGE END OF VOLUME SET
CAUSE The end of the last labeled tape of the volume set
has been reached.
ACTION None.
---------------------------------------------------------------
800 MESSAGE EOF IN FROMFILE BUT NOT IN TOFILE
{AT }
{AFTER } RECORD X
{BEFORE}
CAUSE The tofile is larger than the fromfile.
ACTION Purge the tofile and retry the operation using the
NEW option if you are copying to the tofile.
Alternatively, purge the tofile and rebuild it with
the same attributes as the fromfile, then retry the
operation.
---------------------------------------------------------------
801 * MESSAGE EOF IN TOFILE BUT NOT IN FROMFILE
{AT }
{AFTER } RECORD X
{BEFORE}
Cause The tofile is smaller than the fromfile.
Action Purge the tofile and retry the operation using the
NEW option if you are copying to the tofile.
Alternatively, purge the tofile and rebuild it with
the same attributes as the fromfile, then retry the
operation.
---------------------------------------------------------------
802 * MESSAGE READ ERROR IN FROMFILE
{AT }
{AFTER } RECORD X
{BEFORE}
Cause A READ error occurred while verifying or comparing.
Action Retry the operation and check the MPE/iX file
system error.
---------------------------------------------------------------
803 * MESSAGE READ ERROR IN TOFILE
{AT }
{AFTER } RECORD X
{BEFORE}
Cause A READ error occurred while verifying or comparing,
Action Retry the operation and check the MPE/iX file
system error.
---------------------------------------------------------------
901 MESSAGE KSAM FROMFILE BOUNDARY (EOF OR BOF)
Cause The beginning or end of the fromfile was reached
during the FCOPY operation.
Action Try again.
---------------------------------------------------------------
902 MESSAGE KSAM FROMFILE POSITIONING ERROR
CAUSE FCOPY could not find the desired position in the
fromfile.
Action Try again or check the length of the fromfile.
---------------------------------------------------------------
903 MESSAGE ERROR: WRONG CONDITIONS FOR OPENING NEW KSAM FILE
Cause The fromfile is not a KSAM file.
Action Create a KSAM file before running FCOPY and copy to
that file.
---------------------------------------------------------------
904 MESSAGE KSAM ERROR 904
Cause Internal error.
Action Notify your system manager.
---------------------------------------------------------------
905 MESSAGE KSAM ERROR 905
CAUSE Internal error.
Action Notify your system manager.
---------------------------------------------------------------