HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
11705 MESSAGE The NOW or GRADUAL option requires both DATE and
TIME. (CIERR 11705)
CAUSE The SETCLOCK command's ;NOW or ;GRADUAL option was
used without also providing the DATE and TIME
parameters.
ACTION Issue the SETCLOCK command and provide DATE and
TIME along with the ;NOW or ;GRADUAL option.
---------------------------------------------------------------
11706 MESSAGE CORRECTION must be the only parameter. (CIERR
11706)
CAUSE The SETCLOCK command's CORRECTION parameter was
provided while also including at least one other
parameter.
ACTION Issue the SETCLOCK command using CORRECTION as the
only parameter.
---------------------------------------------------------------
11707 MESSAGE TIMEZONE must be the only parameter. (CIERR
11707)
CAUSE The SETCLOCK command's TIMEZONE parameter was
provided while also including at least one other
parameter.
ACTION Issue the SETCLOCK command using TIMEZONE as the
only parameter.
---------------------------------------------------------------
11708 MESSAGE CANCEL must be the only option or parameter.
(CIERR 11708)
CAUSE The SETCLOCK command's ;CANCEL option was provided
while also including at least one other parameter.
ACTION Issue the SETCLOCK command using ;CANCEL as the
only option or parameter.
---------------------------------------------------------------
11709 MESSAGE The DATE parameter has an incorrect format.
Expected mm/dd/yyyy. (CIERR 11709)
CAUSE The SETCLOCK command's DATE parameter did not have
valid numeric values for month, day and year.
ACTION Provide the DATE format in the format mm/dd/yyyy or
mm/dd/yy.
---------------------------------------------------------------
11710 MESSAGE The specified system time is too early. (CIERR
11710)
CAUSE SETCLOCK was issued with a system time before
January 1, 1970 at 12:10 a.m. The system will not
function properly with a system time set before
this value.
ACTION Issue the SETCLOCK with a DATE and TIME after
January 1, 1970 at 12:10 a.m.
---------------------------------------------------------------
11711 MESSAGE The specified DATE is out of range. (CIERR 11711)
CAUSE At least one of the numeric values for month, day,
or year were beyond the range one would expect for
a month, day, or year.
ACTION Issue the SETCLOCK command with a month in the
range 1 through 12, a day in the range appropriate
for that month, and a year between 1970 and 2027.
---------------------------------------------------------------
11712 MESSAGE The TIME parameter has an incorrect format.
Expected hh:mm[:ss]. (CIERR 11712)
CAUSE At least one of the numeric values for hours or
minutes was not provided, or the values were not
separated with a colon.
ACTION Provide the TIME parameter in the form hh:mm, or
optionally hh:mm:ss.
---------------------------------------------------------------
11713 MESSAGE The specified system time is out of range. (CIERR
11713)
CAUSE The TIME parameter was provided with numeric values
for hour, minute or second which exceeded the range
associated with hours, minutes or seconds.
ACTION Provide the TIME parameter with hours in the range
0 through 23, minutes in the range 0 through 59,
and optionally seconds in the range 0 through 59.
---------------------------------------------------------------
11715 MESSAGE The TIMEZONE parameter has an incorrect format.
(CIERR 11715)
CAUSE The TIMEZONE was provided either with a missing
value for hours or minutes or with a missing colon
separating hours from minutes.
ACTION Provide the TIMEZONE parameter in the form Ehh:mm
or Whh:mm.
---------------------------------------------------------------
11716 MESSAGE The TIMEZONE parameter requires a preceding W or
E. (CIERR 11716)
CAUSE The TIMEZONE parameter was provided without a
preceding W or E indicating whether the hemisphere
should be Western or Eastern.
ACTION Provide the TIMEZONE parameter in the form Ehh:mm
or Whh:mm.
---------------------------------------------------------------
11717 MESSAGE The specified TIMEZONE is out of range. (CIERR
11717)
CAUSE The TIMEZONE parameter represented a time zone
which is not within the range of accepted time
zones.
ACTION Provide the TIMEZONE parameter with time values
ranging from 0:00 to 12:59, preceded by a "W" or
"E" to represent the hemisphere.
---------------------------------------------------------------
11718 MESSAGE A current correction is in effect. Use
SETCLOCK;CANCEL. (CIERR 11718)
CAUSE The SETCLOCK command was issued in an attempt to
change the system time or timezone while a current
correction is still in effect.
ACTION Issue the SETCLOCK;CANCEL command, followed by a
SETCLOCK command implementing the desired change.
---------------------------------------------------------------