HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
9122 MESSAGE BREAK DETECTED DURING COPY, NO COPY WAS DONE.
(CIERR 9122)
CAUSE You pressed the break key while the file was being
copied.
ACTION No action is required, unless you did not mean to
stop the copying.
---------------------------------------------------------------
9123 MESSAGE KSAM FILES CANNOT BE COPIED VIA THE COPY COMMAND.
(CIERR 9123)
CAUSE Due to the structure of KSAM files copy command
cannot be used to duplicate them.
ACTION You can use FCOPY to accomplish this task. Refer
to the online Help facility or the FCOPY Reference
Manual, (32212-90003) .
---------------------------------------------------------------
9125 MESSAGE COPY COMMAND CANNOT WRITE TO TARGET FILE. (CIERR
9125)
CAUSE A file system error occurred while attempting to
write to the "TO =" file.
ACTION Contact your System Administer.
---------------------------------------------------------------
9126 MESSAGE COPY COMMAND CANNOT READ SOURCE FILE. (CIERR
9126)
CAUSE The account security prevented the copy command
from reading the source file you specified.
ACTION Ask the owner of the file to release the file so
you can copy it. Consult with your account manager
or system manager if you do not know who owns the
file.
---------------------------------------------------------------
9127 MESSAGE COPY COMMAND CANNOT CLOSE SOURCE FILE. (CIERR
9127)
CAUSE Unexpected file system error.
ACTION Submit an SR.
---------------------------------------------------------------
9128 MESSAGE COPY COMMAND CANNOT CLOSE TARGET FILE. (CIERR
9128)
CAUSE You do not have either Save Files (SF) capability
on the logon user, or write access (W) to the file.
ACTION Check the file access attributes and the
capabilities assigned to your logon user. Consult
with your account manager or system manager if you
do not have the appropriate capabilities to fix the
problem.
---------------------------------------------------------------
9129 MESSAGE USER SPECIFIED AN INVALID TARGET FILE NAME.
(CIERR 9129)
CAUSE When you attempted to copy the contents of one file
to another file (the target file), you specified a
target file name containing invalid characters (for
example: COPY ABC, ABC_DEF.
ACTION Reenter the command and specify a valid target file
name.
---------------------------------------------------------------
9135 MESSAGE COPY COMMAND CANNOT OPEN THE SOURCE FILE. (CIERR
9135)
CAUSE The file you specified may not exist in the group
and account. Another possible cause is that you do
not have READ access to the file, or you used an
invalid file name.
ACTION Verify whether the file exists in another
group.account or its fully qualified name was
entered incorrectly. Reenter the command.
---------------------------------------------------------------
9136 MESSAGE COPY COMMAND CANNOT OPEN THE TARGET FILE. (CIERR
9136)
CAUSE Unexpected file system error.
---------------------------------------------------------------
9137 MESSAGE USER SPECIFIED AN INVALID SOURCE FILE NAME.
(CIERR 9137)
---------------------------------------------------------------
9144 MESSAGE THE TARGET FILE IS BACKREFERENCED, BUT NO FILE
EQUATION EXISTS. (CIERR 9144)
CAUSE You may have forgotten to create a file equation
that defines the file designator you are now using
as a backreferenced file during the COPY process.
For example, you may have entered COPY A,*B but
forgotten to create a file equation that defines B
(*B is the backreferenced file).
ACTION Create a file equation for the backreferenced file.
---------------------------------------------------------------
9146 MESSAGE THE COPY COMMAND DOES NOT SUPPORT EXCLUSIVE
ACCESS. (CIERR 9146)
---------------------------------------------------------------
9147 MESSAGE THE COPY COMMAND FAILED DUE TO AN INTERNAL ERROR.
(CIERR 9147)
CAUSE A variety of factors may cause this error.
ACTION Reenter the command. Be that all names are spelled
correctly, that the source file and group exist and
that the target group exists. If it fails
consistently, consult with your system manager or
support representative.
---------------------------------------------------------------
9150 MESSAGE PARAMETER FOR TUNE COMMAND IS OUT OF RANGE. BASE
AND LIMIT MUST BE WITHIN 0 THROUGH 255, AND MIN AND
MAX QUANTUM MUST BE WITHIN 1 THROUGH 32767. (CIERR
9150)
CAUSE One of the values you supplied to the second
parameter of TUNE is outside the allowable ranges.
Another possible cause is that the base PRI is less
than the predefined values for the specified queue.
ACTION Re-enter the command and supply the parameter with
a legal value. Use the :SHOWQ;STATUS command to
see the existing values for the queue. (for
example, CQ, DQ, and EQ cannot have a base PRI
which is less than 150).
---------------------------------------------------------------
9151 MESSAGE The source file cannot be a directory. (CIERR
9151)
CAUSE The from filename specified with FCOPY is a
directory.
ACTION Use FCOPY with files only.
---------------------------------------------------------------
9152 MESSAGE The target file cannot be a directory. (CIERR
9152)
CAUSE The to filename specified with FCOPY is a
directory.
ACTION Use FCOPY with files only.
---------------------------------------------------------------
9155 MESSAGE INVALID PROCESS STACK DEPTH; EXPECTED A VALUE 0 -
16. (CIERR 9155)
CAUSE You specified a stack depth that is outside the
legal values of the ERRDUMP command.
ACTION Reenter the command and supply a value that is
between -1 and 16 inclusive. Refer to the online
Help facility or the MPE/iX Commands Reference
Manual, (32650-90003).
---------------------------------------------------------------
9156 MESSAGE INVALID SYSTEM STACK DEPTH; EXPECTED A VALUE 0 -
127. (CIERR 9156)
CAUSE You specified a system stack depth that is outside
the legal values of the ERRDUMP;SYS command.
ACTION Reenter the command and supply a value that is
between -1 and 127 inclusive. Refer to the online
Help facility or the MPE/iX Commands Reference
Manual, (32650-90003).
---------------------------------------------------------------
9201 MESSAGE ULABEL PARAMETER OVERIDES PREVIOUS ULABEL
PARAMETER. (CIWARN 9201)
---------------------------------------------------------------
9202 MESSAGE ULABEL DEFAULTING TO 0. (CIWARN 9202)
---------------------------------------------------------------
9203 MESSAGE ULABEL MUST BE BETWEEN 0 AND 254. (CIERR 9203)
---------------------------------------------------------------
9204 MESSAGE EXTRANEOUS PARAMETER TO THE ULABEL KEYWORD.
(CIERR 9204)
---------------------------------------------------------------
9205 MESSAGE FIRSTREC PARAMETER OVERIDES PREVIOUS FIRSTREC
PARAMETER. & (CIWARN 9205)
---------------------------------------------------------------
9206 MESSAGE FIRSTREC PARAMETER DEFAULTING TO 0. (CIWARN 9206)
---------------------------------------------------------------
9207 MESSAGE FIRSTREC MUST BE 0 OR 1. (CIERR 9207)
---------------------------------------------------------------
9208 MESSAGE EXTRANEOUS PARAMETER TO FIRSTREC KEYWORD. (CIERR
9208)
---------------------------------------------------------------
9209 MESSAGE KEY KEYWORD IS REQUIRED WHEN KSAMXL IS SPECIFIED.
(CIERR 9209)
---------------------------------------------------------------
9210 MESSAGE KSAMXL KEYWORD IS REQUIRED WHEN KEY, REUSE,
NOREUSE, FIRSTREC,& OR LANG ARE SPECIFIED. (CIERR
9210)
---------------------------------------------------------------
9211 MESSAGE KSAMXL PARAMETERS OVERRIDE FORMS PARAMETERS.
(CIERR 9211)
---------------------------------------------------------------
9212 MESSAGE FORMS PARAMETERS OVERRIDE KSAMXL PARAMETERS.
(CIWARN 9212)
---------------------------------------------------------------
9213 MESSAGE REUSE AND NOREUSE HAVE BEEN SPECIFIED TOGETHER.
LAST OCCURANCE& USED. (CIWARN 9213)
---------------------------------------------------------------
9214 MESSAGE LANG PARAMETER OVERIDES PREVIOUS LANG PARAMETER.
(CIWARN 9214)
---------------------------------------------------------------
9215 MESSAGE LANG PARAMETER DEFAULTING TO 0. (CIWARN 9215)
---------------------------------------------------------------
9216 MESSAGE INVALID VALUE FOR LANG PARAMETER. (CIERR 9216)
---------------------------------------------------------------
9217 MESSAGE EXTRANEOUS PARAMETER TO LANG KEYWORD. (CIERR
9217)
---------------------------------------------------------------
9218 MESSAGE INVALID LANG ID. LANG IS BAD OR NOT CONFIGURED.
(CIERR 9218)
---------------------------------------------------------------
9219 MESSAGE KEY PARAMETER OVERIDES PREVIOUS KEY PARAMETER.
(CIWARN 9219)
---------------------------------------------------------------
9220 MESSAGE EXPECTED "(" OR "^" TO BEGIN KEY PARAMETER LIST.
(CIERR 9220)
---------------------------------------------------------------
9221 MESSAGE KEYTYPE NOT SPECIFIED. ACCEPTABLE KEYTYPES ARE
B,I,R,E,N,P,*.& (CIERR 9221)
---------------------------------------------------------------
9222 MESSAGE INVALID KEYTYPE. ACCEPTABLE KEYTYPES ARE
B,I,R,E,N,P,*.& (CIERR 9222)
---------------------------------------------------------------
9223 MESSAGE KEYLOCATION NOT SPECIFIED OR MISSING. (CIERR
9223)
---------------------------------------------------------------
9224 MESSAGE KEYLOCATION INVALID. MUST BE NUMERIC. (CIERR
9224)
---------------------------------------------------------------
9225 MESSAGE KEYSIZE NOT SPECIFIED OR MISSING. (CIERR 9225)
---------------------------------------------------------------
9226 MESSAGE KEYSIZE INVALID. MUST BE NUMERIC. (CIERR 9226)
---------------------------------------------------------------
9227 MESSAGE EXPECTED DUP OR RDUP PARAMETERS. (CIERR 9227)
---------------------------------------------------------------
9228 MESSAGE EXPECTED ";" OR ")" TO END KEY. (CIERR 9228)
---------------------------------------------------------------
9229 MESSAGE KEYLOCATION HAS ALREADY BEEN SPECIFIED. (CIERR
9229)
---------------------------------------------------------------
9230 MESSAGE KSAM ALLOWS MAXIMUM OF 16 KEYS ONLY. (CIERR
9230)
---------------------------------------------------------------
9240 MESSAGE EXTRANEOUS PARAMETER TO KEY KEYWORD. (CIERR 9240)
---------------------------------------------------------------
9241 MESSAGE SPECIFICATION OF STD OVERRIDES PREVIOUS KSAMXL.
(CIWARN 9241)
---------------------------------------------------------------
9242 MESSAGE SPECIFICATION OF RIO OVERRIDES PREVIOUS KSAMXL.
(CIWARN 9242)
---------------------------------------------------------------
9243 MESSAGE SPECIFICATION OF MSG OVERRIDES PREVIOUS KSAMXL.
(CIWARN 9243)
---------------------------------------------------------------
9244 MESSAGE SPECIFICATION OF CIR OVERRIDES PREVIOUS KSAMXL.
(CIWARN 9244)
---------------------------------------------------------------
9245 MESSAGE SPECIFICATION OF SPOOL OVERRIDES PREVIOUS KSAMXL.
(CIWARN 9245)
---------------------------------------------------------------
9246 MESSAGE SPECIFICATION OF KSAMXL OVERRIDES PREVIOUS STD.
(CIWARN 9246)
---------------------------------------------------------------
9247 MESSAGE SPECIFICATION OF KSAMXL OVERRIDES PREVIOUS RIO.
(CIWARN 9247)
---------------------------------------------------------------
9248 MESSAGE SPECIFICATION OF KSAMXL OVERRIDES PREVIOUS MSG.
(CIWARN 9248)
---------------------------------------------------------------