HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
6330 MESSAGE EXPECTED A "MM/DD/YY" SPECIFICATION AFTER "DATE".
(CIERR 6330)
CAUSE An invalid entry was made following the "DATE"
keyword.
ACTION Reenter the command and specify the date in the
"MM/DD/YY" format.
---------------------------------------------------------------
6331 MESSAGE EXPECTED A NUMBER BETWEEN 1 AND 12 INCLUSIVE FOR
THE MONTH SPECIFICATION. (CIERR 6331)
CAUSE An invalid number was entered for the month.
ACTION Use a number between 1 and 12 for the month
specification.
---------------------------------------------------------------
6332 MESSAGE EXPECTED A "/" IN THE "MM/DD/YY" SPECIFICATION.
(CIERR 6332)
CAUSE A slash (/) was not used as a separator between the
month, day, and year entries.
ACTION Separate the month, day, and year entries with a
slash (/).
---------------------------------------------------------------
6333 MESSAGE EXPECTED A NUMBER SPECIFYING THE DAY OF THE
MONTH. (CIERR 6333)
CAUSE A non-numeric character was used when specifying
the day of the month.
ACTION Make sure that a numeric character is used when
specifying the day of the month.
---------------------------------------------------------------
6334 MESSAGE EXPECTED A NUMBER BETWEEN THE CURRENT YEAR NUMBER
AND 99 FOR THE YEAR SPECIFICATION. (CIERR 6334)
CAUSE A number less than the current year or greater than
99 was used when specifying the year.
ACTION Make sure that the year specified is greater than
the current year and less than 99.
---------------------------------------------------------------
6338 MESSAGE "IN" KEYWORD CAN ONLY BE SPECIFIED ONCE. (CIERR
6338)
CAUSE The "IN" keyword was specified more than once.
ACTION Reenter the command using the "IN" keyword only
once.
---------------------------------------------------------------
6339 MESSAGE EXPECTED AN EQUALS SIGN ("=") AFTER "IN". (CIERR
6339)
CAUSE An equal sign (=) was missing after the "IN"
keyword entry.
ACTION Reenter the command and make sure that the "IN"
keyword is followed by an equal sign (=) and a
value.
---------------------------------------------------------------
6340 MESSAGE EXPECTED A "DAYS [, HOURS [, MINS] ]"
SPECIFICATION AFTER "IN". (CIERR 6340)
CAUSE A value was not specified with the "IN" keyword.
ACTION Reenter the command and make sure the "IN" keyword
is followed by an equal sign (=) and a value.
---------------------------------------------------------------
6341 MESSAGE EXPECTED A POSITIVE NUMBER SPECIFYING THE DAY
OFFSET. (CIERR 6341)
CAUSE A negative number was specified as the day offset.
ACTION Reenter the command and make sure that a positive
number is used as the day offset.
---------------------------------------------------------------
6342 MESSAGE EXPECTED A POSITIVE NUMBER SPECIFYING THE HOURS
OFFSET. (CIERR 6342)
CAUSE A negative number was specified as the hours
offset.
ACTION Reenter the command and make sure that a positive
number is used as the hours offset.
---------------------------------------------------------------
6343 MESSAGE EXPECTED A POSITIVE NUMBER SPECIFYING THE MINUTES
OFFSET. (CIERR 6343)
CAUSE A negative number was specified as the minutes
offset.
ACTION Reenter the command and make sure that a positive
number is used as the minutes offset.
---------------------------------------------------------------
6355 MESSAGE SPECIFIED TIME IS EARLIER THAN OR AT THE CURRENT
TIME. JOB(S) WILL BE :STREAMED IMMEDIATELY.
(CIWARN 6355)
CAUSE The job will be streamed immediately because of the
value you specified with the ;AT, or ;DAY, or
;DATE, or ;IN option.
ACTION If you want the job to stream at a future time and
date, you must edit the job file so that the time,
day, or date specified in the file is later than
the current time, day, or date.
---------------------------------------------------------------
7000 MESSAGE SPECIFIED DEVICE NOT WITHIN RANGE OF VALID LDEVS.
(CIERR 7000)
CAUSE The device specified was outside the range of valid
logical devices.
ACTION Use SHOWDEV to view valid ldevs. Then reenter the
command and make sure that the specified device is
within the range of valid logical devices.
---------------------------------------------------------------
7001 MESSAGE SPECIFIED DEVICE MUST NOT BE VIRTUAL. (CIERR
7001)
CAUSE The device specified is a virtual device.
ACTION Ask the system manager to use SYSGEN to determine
which ldevs are associated with actual pieces of
hardware. Then reenter the command and specify the
appropriate ldev (must NOT be a virtual device).
---------------------------------------------------------------
7002 MESSAGE SPECIFIED DEVICE MUST BE A TERMINAL. (CIERR 7002)
CAUSE The device specified in the command entry is not a
terminal.
ACTION Ask the system manager to use SYSGEN to determine
which ldevs are associated with terminals. Then
reenter the command and make sure the device
specified is a terminal.
---------------------------------------------------------------
7003 MESSAGE SPECIFIED DEVICE IS NOT FREE. (CIERR 7003)
CAUSE The device specified is not available for use.
ACTION Use SHOWDEV to see if the device is "AVAILABLE".
Then reenter the command and make sure the device
specified is available for use.
---------------------------------------------------------------
7004 MESSAGE SPECIFIED DEVICE MUST BE JOB ACCEPTING. (CIERR
7004)
---------------------------------------------------------------
7005 MESSAGE SPECIFIED DEVICE IS IN DIAGNOSTIC MODE. (CIERR
7005)
CAUSE A diagnostic utility is running on the specified
device.
ACTION Reenter the command and make sure the device
specified is not in the diagnostic mode.
---------------------------------------------------------------
7006 MESSAGE SPECIFIED DEVICE IS UNAVAILABLE TO SYSTEM. (CIERR
7006)
CAUSE The specified device is not available to the
system.
ACTION Ask the operator to "UP" the device.
---------------------------------------------------------------
7007 MESSAGE SPECIFIED DEVICE HAS A DOWN PENDING ON IT. (CIERR
7007)
CAUSE The DOWN command has been issued against this
device and will take effect as soon as the current
work performed on the device is completed.
ACTION Reenter the command and use another device if
possible. If not, consult with your system
operator or system manager.
---------------------------------------------------------------
7008 MESSAGE SPECIFIED DEVICE MUST NOT BE A DS DEVICE. (CIERR
7008)
CAUSE The device specified is a distributed system (DS)
device.
ACTION Reenter the command and make sure the specified
device is not a DS device.
---------------------------------------------------------------
7009 MESSAGE MUST HAVE PS CAPABILITY TO EXECUTE THIS COMMAND.
(CIERR 7009)
CAUSE A command was entered that requires programmatic
sessions (PS) capability.
---------------------------------------------------------------
7010 MESSAGE MUST HAVE SEMI-COLON (;) DELIMITER. (CIERR 7010)
CAUSE A semi-colon (;) delimiter was ommitted in the
command entry.
ACTION Reenter the command and make sure that the
semi-colon delimiter is used.
---------------------------------------------------------------
7011 MESSAGE EXPECTED VALID INTEGER NUMBER OF LDEV. (CIERR
7011)
CAUSE The interger number entered for the logical device
was not a valid number.
ACTION Reenter the command and make sure the integer used
for the logical device is a valid number.
---------------------------------------------------------------
7012 MESSAGE EXPECTED INTEGER SPECIFYING LDEV. (CIERR 7012)
CAUSE The value specified for the logical device was not
an integer.
ACTION Reenter the command and make sure the value
specified for the logical device is an integer.
---------------------------------------------------------------
7013 MESSAGE INVALID JOB TYPE, EXPECT 1 OR 2. (CIERR 7013)
CAUSE An invalid value for the job type was entered.
ACTION Reenter the command and make sure the value entered
for the job type is a 1 or a 2.
---------------------------------------------------------------
7014 MESSAGE PROCESS ABORTED BEFORE LOGGING ON. (CIERR 7014)
CAUSE The process was aborted before logging on.
---------------------------------------------------------------
7015 MESSAGE SESSION LIMIT EXCEEDED, SESSION DIDN'T LOG ON.
(CIERR 7015)
CAUSE The maximum number of sessions was exceeded.
ACTION Increase the maximum number of sessions allowed by
using the :LIMIT command (to use this command you
must have SM capability). Or, get someone else to
log off so that the maximum number of sessions is
not exceeded.
---------------------------------------------------------------
7016 MESSAGE INPRI BELOW JOBFENCE, SESSION DIDN'T LOG ON.
(CIERR 7016)
CAUSE The input priority is set below the job fence.
---------------------------------------------------------------
7017 MESSAGE UNABLE TO OBTAIN PCB ENTRY. (CIERR 7017)
---------------------------------------------------------------
7018 MESSAGE UNABLE TO OBTAIN STACK. (CIERR 7018)
---------------------------------------------------------------
7019 MESSAGE UNABLE TO OBTAIN JIT DST. (CIERR 7019)
---------------------------------------------------------------
7020 MESSAGE UNABLE TO OBTAIN JDT DST. (CIERR 7020)
---------------------------------------------------------------
7021 MESSAGE UNABLE TO OBTAIN FILE DST. (CIERR 7021)
---------------------------------------------------------------
7022 MESSAGE UNABLE TO OBTAIN JOB PROCESS COUNT ENTRY. (CIERR
7022)
---------------------------------------------------------------
7023 MESSAGE UNABLE TO OBTAIN ENTRY FOR OUTPUT DEVICE. (CIERR
7023)
---------------------------------------------------------------
7024 MESSAGE UNABLE TO OBTAIN ENTRY FOR INPUT DEVICE. (CIERR
7024)
---------------------------------------------------------------
7025 MESSAGE ERROR OCCURRED BEFORE SESSION LOGGED ON. (CIERR
7025)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
contact your system manager or support
representative.
---------------------------------------------------------------
7026 MESSAGE UNABLE TO OPEN $STDIN. (CIERR 7026)
---------------------------------------------------------------
7027 MESSAGE UNABLE TO OPEN $STDLIST. (CIERR 7027)
CAUSE There could be too many spool files, or the
$STDLIST device may not be spooled.
ACTION PURGE all extraneous spool files, or enter
:STARTSPOOL.
---------------------------------------------------------------
7028 MESSAGE INVALID PASSWORD. (CIERR 7028)
CAUSE An invalid password was specified.
ACTION Use a valid password.
---------------------------------------------------------------
7029 MESSAGE ACCOUNT OUT OF CPU TIME. (CIERR 7029)
CAUSE You have consumed all the CPU time allotted to your
account; evidently, you have been running
applications that are CPU intensive.
ACTION Contact your system manager.
---------------------------------------------------------------
7030 MESSAGE ACCOUNT OUT OF CONNECT TIME. (CIERR 7030)
CAUSE You have consumed all the connect time allotted to
your account; evidently, you have been logging on
for long periods of time.
ACTION Contact your system manager.
---------------------------------------------------------------
7031 MESSAGE MUST HAVE BA CAPABILITY. (CIERR 7031)
CAUSE This capability is required for batch access (BA).
ACTION Contact your account manager or system manager.
---------------------------------------------------------------
7032 MESSAGE MUST HAVE IA CAPABILITY. (CIERR 7032)
CAUSE This capability is required for interactive access
(IA).
ACTION Contact your account manager or system manager.
---------------------------------------------------------------
7033 MESSAGE GROUP OUT OF CPU TIME. (CIERR 7033)
CAUSE You have consumed all the CPU time allotted to your
current group; evidently, you have been running
applications that are CPU intensive.
ACTION Contact your account manager.
---------------------------------------------------------------
7034 MESSAGE GROUP OUT OF CONNECT TIME. (CIERR 7034)
CAUSE You have consumed all the connect time allotted to
your current group; evidently, you have been
logging on for long periods of time.
ACTION Contact your account manager.
---------------------------------------------------------------
7035 MESSAGE MUST TERMINATE LOGON STRING WITH "CR" . (CIERR
7035)
CAUSE The logon string was not terminated with a carriage
return.
ACTION Reenter the logon string and terminate with a
carriage return.
---------------------------------------------------------------
7036 MESSAGE INVALID LDEV, TYPE MUST BE 16 AND SUBTYPE MUST BE
0 OR 4 (CIERR 7036)
---------------------------------------------------------------
7037 MESSAGE UNEXPECTED CREATE SESSION STATUS. (CIERR 7037)
---------------------------------------------------------------
7038 MESSAGE CAN'T SWITCH TO CREATE SESSION. (CIERR 7038)
---------------------------------------------------------------
7039 MESSAGE INTERNAL PROGRAMMATIC SESSION ERROR (CIERR 7039)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
contact your system manager or support
representative.
---------------------------------------------------------------
7040 MESSAGE UNABLE TO OPEN $STDERR. (CIERR 7040)
---------------------------------------------------------------
7042 MESSAGE UNABLE TO OBTAIN "SYSTEM ALLOW MASK". (CIERR
7042)
---------------------------------------------------------------
7100 MESSAGE UNABLE TO DEALLOCATE ACD SPACE. (CIERR 7100)
---------------------------------------------------------------
7101 MESSAGE ACD VERSION DOES NOT MATCH THE CURRENT VERSION
(CIERR 7101)
---------------------------------------------------------------
7102 MESSAGE ACD WAS CORRUPTED PRIOR TO BEING DELETED. (CIERR
7102)
---------------------------------------------------------------
7103 MESSAGE OPERATION FAILED ON SOME DEVICES SPECIFIED.
(CIERR 7103)
---------------------------------------------------------------