HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
3910 MESSAGE COMMAND REQUIRES 3 THREE PARAMETERS (CIERR 3910).
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4100 MESSAGE NUMBER OF PARAMETERS EXCEEDS MAXIMUM OF !.
(CIERR 4100)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4101 MESSAGE EXPECTED AT LEAST TWO PARAMETERS: A DS DEVICE
CLASS/NUMBER AND A FUNCTION KEYWORD. (CIERR 4101)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4102 MESSAGE EXPECTED A DEVICE CLASS NAME OR LOGICAL DEVICE
NUMBER FOR ONE OR MORE DS DEVICES. (CIERR 4102)
CAUSE A device specification was expected.
ACTION Specify a device name.
---------------------------------------------------------------
4103 MESSAGE USER IS NOT ASSOCIATED WITH DS DEVICE !. NO
CONTROL FUNCTIONS EXECUTED FOR THIS DEVICE.
(CIWARN 4103)
CAUSE The user specified is not associated with the
device specified.
ACTION Reenter the command using the correct device
associated with your user. Or, associate the user
with the device by using the ASSOC utility and the
ASSOCIATE command. specifications.
---------------------------------------------------------------
4104 MESSAGE USER IS NOT ALLOWED TO USE :DSCONTROL AND IS NOT
ASSOCIATED WITH THE DS DEVICE(S). (CIERR 4104)
CAUSE User is not allowed to use command.
ACTION Illegal use of command.
---------------------------------------------------------------
4105 MESSAGE EXPECTED ONE OR MORE OF THE CONTROL FUNCTIONS:
OPEN, SHUT, MON, MOFF, COMP, NOCOMP, TRACE, DEBUG,
OR RETRY. (CIERR 4105)
CAUSE You did not enter a control function.
ACTION Enter control function to command line.
---------------------------------------------------------------
4106 MESSAGE INVALID CONTROL FUNCTION. EXPECTED ONE OF: OPEN,
SHUT, MON, MOFF, COMP, NOCOMP, TRACE, DEBUG, OR
RETRY. (CIERR 4106)
CAUSE Control function referenced is not accepted.
ACTION Reenter command with a valid control function.
---------------------------------------------------------------
4107 MESSAGE MASTER OVERRIDES PREVIOUS MASTER/SLAVE OPTION.
(CIWARN 4107)
CAUSE Previous MASTER/SLAVE option has been overwritten.
ACTION No action required.
---------------------------------------------------------------
4108 MESSAGE SLAVE OVERRIDES PREVIOUS MASTER/SLAVE OPTION.
(CIWARN 4108)
CAUSE Previous MASTER/SLAVE option has been overwritten.
ACTION No action required.
---------------------------------------------------------------
4109 MESSAGE SPEED OPTION OVERRIDES PREVIOUS SPEED OPTION.
(CIWARN 4109)
CAUSE Previous speed option has been overwritten.
ACTION No action necessary.
---------------------------------------------------------------
4110 MESSAGE OPEN OVERRIDES PREVIOUS OPEN/SHUT FUNCTION.
(CIWARN 4110)
CAUSE Previous OPEN/SHUT function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4111 MESSAGE SHUT OVERRIDES PREVIOUS OPEN/SHUT FUNCTION.
(CIWARN 4111)
CAUSE Previous OPEN/SHUT function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4112 MESSAGE TRACE OVERRIDES PREVIOUS TRACE FUNCTION(S).
(CIWARN 4112)
CAUSE Previous trace function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4113 MESSAGE DEBUG OVERRIDES PREVIOUS DEBUG FUNCTION(S).
(CIWARN 4113)
CAUSE Previous debug function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4114 MESSAGE MON OVERRIDES PREVIOUS MON/MOFF FUNCTION.
(CIWARN 4114)
CAUSE Previous MON/MOFF function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4115 MESSAGE MOFF OVERRIDES PREVIOUS MON/MOFF FUNCTION.
(CIWARN 4115)
CAUSE Previous MON/MOFF function has been overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4116 MESSAGE COMP OVERRIDES PREVIOUS COMP/NOCOMP FUNCTION.
(CIWARN 4116)
CAUSE Previous COMP/NOCOMP function has be overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4117 MESSAGE NOCOMP OVERRIDES PREVIOUS COMP/NOCOMP FUNCTION.
(CIWARN 4117)
CAUSE Previous COMP/NOCOMP overwritten.
ACTION None. Information only.
---------------------------------------------------------------
4118 MESSAGE EXPECTED A ";" , "," OR RETURN AS DELIMITER.
(CIERR 4118)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4119 MESSAGE EXPECTED EITHER A ";" OR RETURN AS DELIMITER.
(CIERR 4119)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4120 MESSAGE EXPECTED A "=" AS DELIMITER FOR SPEED OPTION.
(CIERR 4120)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4121 MESSAGE EXPECTED A "," AS DELIMITER BETWEEN OPTIONS.
(CIERR 4121)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4122 MESSAGE ILLEGAL OPEN/SHUT OPTION. EXPECTED ONE OF:
MASTER, SLAVE, SPEED, OR LINESPEED VALUE. (CIERR
4122)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4123 MESSAGE EXPECTED A POSITIVE DOUBLE VALUE FOR LINESPEED.
(CIERR 4123)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4124 MESSAGE CS CAPABILITY REQUIRED TO USE :DSCONTROL. (CIERR
4124)
CAUSE User does not have the user capability to use this
command.
ACTION Check with your system manager and ask for CS
capability.
---------------------------------------------------------------
4125 MESSAGE PM CAPABILITY REQUIRED TO USE DEBUG FUNCTION.
(CIERR 4125)
CAUSE User does not have the capability to execute the
command.
ACTION Check with your system manager and ask for PM
capability.
---------------------------------------------------------------
4126 MESSAGE DEBUG FUNCTION MAY ONLY BE USED BY SYSTEM
CONSOLE. (CIERR 4126)
CAUSE Command can only be executed from the system
console.
ACTION Enter command at the system console.
---------------------------------------------------------------
4127 MESSAGE EXPECTED NO OPTION FOR DEBUG OR ONE OF THE
FOLLOWING: ON, OFF, OR POSITIVE INTEGER VALUE.
(CIERR 4127)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4128 MESSAGE EXPECTED NO OPTION FOR MON/MOFF OR ONE OF THE
FOLLOWING: CS, OR DS. (CIERR 4128)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4129 MESSAGE COMP/NOCOMP FUNCTIONS HAVE NO OPTIONS. (CIERR
4129)
CAUSE Option for this command not accepted.
ACTION Check syntax.
---------------------------------------------------------------
4130 MESSAGE SPEED OPTION IGNORED FOR SHUT FUNCTION. (CIWARN
4130)
CAUSE The option given to SPEED has been ignored.
ACTION None. Information only.
---------------------------------------------------------------
4131 MESSAGE EXTRANEOUS ";" IGNORED. POSSIBLE MISSING
FUNCTION? (CIWARN 4131)
CAUSE Extraneous information ignored.
ACTION None. Information only.
---------------------------------------------------------------
4132 MESSAGE EXTRANEOUS "," IGNORED. POSSIBLE MISSING OPTION?
(CIWARN 4132)
CAUSE Extraneous information ignored.
ACTION None. Information only.
---------------------------------------------------------------
4133 MESSAGE CREATION OF DS MONITOR PROCESS FAILED. (CIERR
4133)
CAUSE Same as the message.
ACTION Check with system manager.
---------------------------------------------------------------
4134 MESSAGE PROGRAM FILE "DSMON.PUB.SYS" MISSING. (CIERR
4134)
CAUSE Referenced program does not exist.
ACTION Contact system manager.
---------------------------------------------------------------
4135 MESSAGE DS MONITOR UNABLE TO RUN AS A SYSTEM PROCESS.
(CIERR 4135)
CAUSE Specified DS monitor not able to run as a system
process.
ACTION Check DS monitor.
---------------------------------------------------------------
4136 MESSAGE CS DEVICE ! IS UNAVAILABLE FOR USE. (CIERR 4136)
CAUSE Device specified not accessible.
ACTION Check CS device.
---------------------------------------------------------------
4137 MESSAGE DS DEVICE MUST BE OPEN PRIOR TO USE. (CIERR
4137)
CAUSE DS device not opened.
ACTION Open DS device.
---------------------------------------------------------------
4138 MESSAGE USER SPECIFIED TRACE FILE NOT ALLOWED WHEN MORE
THAN ONE DEVICE IN DEVICE CLASS. (CIERR 4138)
CAUSE Specified file not allowed. More than one device
is in device class.
ACTION Check device classes.
---------------------------------------------------------------
4139 MESSAGE DS DEVICE ! CURRENTLY CONTROLLED ELSEWHERE.
(CIWARN 4139)
CAUSE Specified device can not be controlled from user's
current location.
ACTION Specify another device.
---------------------------------------------------------------
4140 MESSAGE DS DEVICE !: OPEN/SHUT NOT EXECUTED DUE TO ABOVE.
(CIWARN 4140)
CAUSE Open/shut not executed for the given reason.
ACTION None. Information only.
---------------------------------------------------------------
4141 MESSAGE DS DEVICE !: TRACE NOT EXECUTED DUE TO ABOVE.
(CIWARN 4141)
CAUSE Trace not executed for given reason.
ACTION None. Information only.
---------------------------------------------------------------
4142 MESSAGE DS DEVICE !: MON/MOFF NOT EXECUTED DUE TO ABOVE.
(CIWARN 4142)
CAUSE MON/MOFF not executed due to reason given.
ACTION None. Information only.
---------------------------------------------------------------
4143 MESSAGE DS DEVICE !: COMP/NOCOMP NOT EXECUTED DUE TO
ABOVE. (CIWARN 4143)
CAUSE COMP/NOCOMP not executed due to reason given.
ACTION None. Information only.
---------------------------------------------------------------
4144 MESSAGE DS DEVICE !: DEBUG NOT EXECUTED DUE TO ABOVE.
(CIWARN 4144)
CAUSE DEBUG not executed due to given reason.
ACTION None. Information only.
---------------------------------------------------------------
4145 MESSAGE NO DS DEVICES REMAINING TO BE CONTROLLED.
(CIWARN 4145)
CAUSE There are no further DS devices to be controlled.
ACTION None. Information only.
---------------------------------------------------------------
4146 MESSAGE RETRY OVERRIDES PREVIOUS RETRY FUNCTION. (CIWARN
4146)
CAUSE Previous RETRY overwritten.
ACTION None; the message is for information only.
---------------------------------------------------------------
4147 MESSAGE EXPECTED AN "=" AS DELIMITER FOR RETRY FUNCTION.
(CIERR 4147)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4148 MESSAGE INVALID RETRY COUNT, MUST SPECIFY "DEFAULT" OR A
NUMBER BETWEEN 0 AND 255 INCLUSIVE. (CIERR 4148)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
4149 MESSAGE DS DEVICE !: RETRY NOT EXECUTED DUE TO ABOVE.
(CIWARN 4149)
CAUSE RETRY not executed due to the reason given.
ACTION None; the message is for information only.
---------------------------------------------------------------
4150 MESSAGE DS INTERNAL FIX NUMBERS DIFFER. (CIWARN 4150)
CAUSE DS internal fix numbers given do not match.
ACTION Check syntax.
---------------------------------------------------------------
4151 MESSAGE INCOMPATIBLE OR MISSING NONCRITICAL DS MODULE:
DSCOPY, DSTEST, DS2026, OR DS2026CN. (CIWARN 4151)
CAUSE Errors encountered during process.
ACTION None; the message is for information only.
---------------------------------------------------------------
4152 MESSAGE CRITICAL DS MODULES ARE INCOMPATIBLE, NO CONTROL
FUNCTIONS EXECUTED. (CIERR 4152)
CAUSE Errors encountered during process.
ACTION Check DS modules and make sure they are installed
correctly.
---------------------------------------------------------------
4153 MESSAGE MISSING CRITICAL DS SOFTWARE, NO CONTROL
FUNCTIONS EXECUTED. (CIERR 4153)
CAUSE Software referenced is not located.
ACTION Check with your service representative.
---------------------------------------------------------------
4154 MESSAGE TOO MANY DS USERS ON THIS SYSTEM. CANNOT OBTAIN
A VIRTUAL PROCESS NUMBER. (CIERR 4154)
CAUSE Too many users using the system to perform task, or
too many DS lines are open.
ACTION Ask the system manager to close any open DS lines.
---------------------------------------------------------------
4180 MESSAGE REDUNDANT SPECIFICATION OF CANCEL OPTION IGNORED.
(CIWARN 4180)
CAUSE Extraneous information provided is ignored.
ACTION None; the message is for information only.
---------------------------------------------------------------
4181 MESSAGE CANCEL OPTION HAS NO PARAMETERS. (CIERR 4181)
CAUSE Extraneous parameter given.
ACTION Check syntax.
---------------------------------------------------------------