HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
3079 MESSAGE EXPECTED ONE OF #Jnnn OR #Snnn. (CIERR 3079)
CAUSE The job number or session number was ommitted or
not entered in the correct form.
ACTION Reenter the command making sure the job number or
the session number is entered in the correct form.
---------------------------------------------------------------
3080 MESSAGE EXPECTED [JOBNAME,]USERNAME.ACCOUNTNAME. (CIERR
3080)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3081 MESSAGE USER NAME AND ACCOUNT NAME ARE AT MOST 8
CHARACTERS. (CIERR 3081)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3082 MESSAGE EXPECTED PERIOD BETWEEN USER AND ACCOUNT NAMES.
(CIERR 3082)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3083 MESSAGE CANNOT ABORT JOB BEING INTRODUCED. (CIERR 3083)
CAUSE An attempt was made to abort a job that is being
introduced.
ACTION Use ABORTJOB only for jobs that are in the WAIT,
SCHEDULE, or EXEC state.
---------------------------------------------------------------
3084 MESSAGE EXPECTED ACCOUNT NAME. (CIERR 3084)
CAUSE The account name was ommitted from the command
entry.
ACTION Reenter the command making sure the account name is
included.
---------------------------------------------------------------
3085 MESSAGE USER AND ACCOUNT NAMES MUST BE AT LEAST 1
CHARACTER. (CIERR 3085)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3086 MESSAGE EXPECTED ONE OF INPRI OR OUTDEV. (CIERR 3086)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3087 MESSAGE EXPECTED SEMICOLON PRECEDING PARAMETER. (CIERR
3087)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3088 MESSAGE EXPECTED "=" FOLLOWING PARAMETER. (CIERR 3088)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3089 MESSAGE ALTJOB EXPECTS AT LEAST JOB NUMBER AND ONE OF
EITHER INPRI OR OUTDEV. (CIERR 3089)
CAUSE No parameters were entered with the ALTJOB command.
ACTION Reenter the ALTJOB command making sure the job
number and either the input priority (INPRI) or the
destination device (OUTDEV) parameters are
specified.
---------------------------------------------------------------
3090 MESSAGE DEVICE OR DEVICE CLASS DOES NOT EXIST IN THIS
CONFIGURATION. (CIERR 3090)
CAUSE The destination device specified with the ALTJOB
command does not exist.
ACTION Reenter the command making sure the device
specified is valid.
---------------------------------------------------------------
3091 MESSAGE JOB MUST BE IN INTRO, SCHED, OR WAIT STATE.
(CIERR 3091)
CAUSE The ALTJOB command was entered specifying a job
that is currently running or has completed.
ACTION Use ALTJOB only for jobs that are in the INTRO,
WAIT, or SCHED state.
---------------------------------------------------------------
3092 MESSAGE INDIRECT FILE CAN'T BE SYSTEM FILE. (CIERR 3092)
CAUSE The indirect file specified is a system file.
ACTION Use the name of a normal file.
---------------------------------------------------------------
3093 MESSAGE INDIRECT MUST BE ASCII AND NOT CCTL. (CIERR 3093)
CAUSE Same as message content.
ACTION Make sure the file has the proper attributes.
---------------------------------------------------------------
3094 MESSAGE EXPECTED ONE OF FILE= OR USER.ACCT;COMMANDS=.
(CIERR 3094)
CAUSE The ALLOW command was entered without parameters.
ACTION Reenter the ALLOW command with the appropriate
parameter(s).
---------------------------------------------------------------
3095 MESSAGE EXPECTED USERNAME. (CIERR 3095)
CAUSE The user name was ommitted from the command entry.
ACTION Reenter the command making sure the user name is
included.
---------------------------------------------------------------
3096 MESSAGE EXPECTED COMMA BETWEEN COMMAND NAMES. (CIERR
3096)
CAUSE The delimiter is missing between the command names
in the COMMANDS= parameter of the ALLOW command.
ACTION Reenter the ALLOW command making sure the commands
in the COMMANDS= parameter are separated by a
comma.
---------------------------------------------------------------
3097 MESSAGE EXPECTED ;COMMANDS= . (CIERR 3097)
CAUSE The COMMANDS= parameter was missing from the ALLOW
command.
ACTION Reenter the ALLOW command making sure the COMMANDS=
parameter is included.
---------------------------------------------------------------
3098 MESSAGE NO SUCH OPERATOR COMMAND. (CIERR 3098)
CAUSE A command was specified with the ALLOW command that
is not an operator command.
ACTION Reenter the ALLOW command making sure the commands
specified are valid operator commands.
---------------------------------------------------------------
3099 MESSAGE ALLOW AND DISALLOW HAVE AT MOST 20 PARAMETERS.
(CIERR 3099)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3100 MESSAGE UNEXPECTED I/O ERROR IN INPUT FILE OR $STDIN.
(CIERR 3100)
CAUSE Internal error.
ACTION There is no action you can take.
---------------------------------------------------------------
3101 MESSAGE NONE OF THE SPECIFIED USER(S) LOGGED ON. (CIERR
3101)
CAUSE The users specified with the ALLOW command are not
logged on.
ACTION If you wish to ALLOW capabilities to all users, set
the @.@ option.
---------------------------------------------------------------
3102 MESSAGE EXPECTED ONE OF EITHER ON OR OFF. (CIERR 3102)
CAUSE You entered an incorrect value, or forgot to enter
a value.
ACTION Reenter the command making sure that the ON or OFF
parameter is specified.
---------------------------------------------------------------
3104 MESSAGE EXPECTED AT LEAST VOLUMESET.GROUP.ACCOUNT.
(CIERR 3104)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3105 MESSAGE LMOUNT EXPECTS
VOLUMESET.GROUP.ACCOUNT[;GEN=GENINDEX] (CIERR
3105)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3106 MESSAGE LDISMOUNT HAS EXACTLY 3 PARAMETERS. (CIERR 3106)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3107 MESSAGE EXPECTED SET NAME OR "*". (CIERR 3107)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3108 MESSAGE EXPECTED '.' FOLLOWING SET NAME. (CIERR 3108)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3109 MESSAGE EXPECTED '.' FOLLOWING GROUP NAME. (CIERR 3109)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3110 MESSAGE EXPECTED ;GEN= . (CIERR 3110)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3111 MESSAGE EXPECTED GENERATION NUMBER BETWEEN 0 AND 65535.
(CIERR 3111)
CAUSE Same as the message.
ACTION Reenter the command making sure the generation is
within the valid range of 0 and 65,535.
---------------------------------------------------------------
3112 MESSAGE MON HAS AT MOST ! PARAMETERS. (CIERR 3112)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3113 MESSAGE MON EXPECTS AT LEAST ONE PARAMETER, THE DEVICE
NUMBER. (CIERR 3113)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3114 MESSAGE SYSTEM BUFFERS UNAVAILABLE FOR MONITORING. (CIERR
3114)
---------------------------------------------------------------
3115 MESSAGE DEVICE MUST BE TAPE FOR USE BY MONITORING. (CIERR
3115)
---------------------------------------------------------------
3116 MESSAGE DEVICE MUST BE DOWN FOR USE BY MONITORING. (CIERR
3116)
---------------------------------------------------------------
3117 MESSAGE EXPECTED ;E= . (CIERR 3117)
---------------------------------------------------------------
3118 MESSAGE ASOCIATE TABLE INCOMPATIBLE WITH OS. USE
ASOCTBL.PUB.SYS TO RECREATE ASOCIATE.PUB.SYS.
(CIERR 3118)
---------------------------------------------------------------
3120 MESSAGE EXPECTED COMMA FOLLOWING MASK. (CIERR 3120)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3121 MESSAGE IGNORED NULL MASK. (CIWARN 3121)
ACTION None. Information only.
---------------------------------------------------------------
3122 MESSAGE MASK MUST BE A NUMBER BETWEEN 0 AND 25. (CIERR
3122)
CAUSE Same as the message.
ACTION Reenter the command making sure the values
specified for the MASK is within the valid range of
0 and 25.
---------------------------------------------------------------
3123 MESSAGE NS SUBSYSTEM NOT INSTALLED IN THIS SYSTEM. (CIERR
3123)
CAUSE The NS3000/XL AdvanceNet subsystem is not
installed.
---------------------------------------------------------------
3124 MESSAGE MULTIPOINT CAPABILITY NOT INSTALLED IN THIS
SYSTEM. (CIERR 3124)
---------------------------------------------------------------
3125 MESSAGE MRJE SUBSYSTEM NOT INSTALLED IN THIS SYSTEM.
(CIERR 3125)
---------------------------------------------------------------
3126 MESSAGE AUTO IS ONLY VALID MODIFIER TO 'ON' PARAMETER.
(CIERR 3126)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3127 MESSAGE SETNAME MUST BE BETWEEN 1 AND 8 CHARACTERS AND
HAVE NO EMBEDDED NON-ALPHANUMERIC CHARACTERS.
(CIERR 3127)
CAUSE The SETNAME specified is not a valid name.
ACTION Reenter the command making sure the SETNAME
specified is a valid name.
---------------------------------------------------------------
3128 MESSAGE JOBSECURITY HAS ONLY 1 PARAMETER, THE SECURITY
LEVEL. (CIERR 3128)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3129 MESSAGE EXPECTED ONE OF EITHER HIGH OR LOW. (CIERR 3129)
CAUSE The command entry is missing a parameter.
ACTION Reenter the command making sure the HIGH or LOW
parameter is included.
---------------------------------------------------------------
3130 MESSAGE CONSOLE DEVICE MUST BE JOB-ACCEPTING TERMINAL.
(CIERR 3130)
---------------------------------------------------------------
3131 MESSAGE CONSOLE DEVICE CANNOT BE MULTIPOINT OR DS
PSEUDO-TERMINAL. (CIERR 3131)
---------------------------------------------------------------
3132 MESSAGE DEVICE CLASS NOT ASSOCIATED. (CIERR 3132)
---------------------------------------------------------------
3137 MESSAGE EXPECTED FILE=FORMALDESIGNATOR[;SHOW] (CIERR
3137)
---------------------------------------------------------------
3138 MESSAGE EXPECTED ;SHOW (CIERR 3138)
---------------------------------------------------------------
3141 MESSAGE NO SUCH DEVICE CLASS IN THIS CONFIGURATION.
(CIERR 3141)
---------------------------------------------------------------
3142 MESSAGE THIS COMMAND IS ONLY AVAILABLE TO SESSIONS
(CIERR 3142).
---------------------------------------------------------------
3143 MESSAGE LDEV NOT IN INPUT DEVICE DIRECTORY. (CIERR 3143)
---------------------------------------------------------------