HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
2002 MESSAGE ACCOUNT NAME CONTAINS SPECIAL CHARACTERS.
ALPHA-NUMERIC CHARACTERS ALLOWED ONLY. (CIERR
2002).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2003 MESSAGE ACCOUNT NAME TOO LONG. EXPECTS 1 TO 8
CHARACTERS. (CIERR 2003).
CAUSE The account name specified exceeded 8 characters.
ACTION Reenter the command making sure the account name
specified is within the range of 1 to 8 characters.
---------------------------------------------------------------
2004 MESSAGE FILE NAME CONTAINS SPECIAL CHARACTERS.
ALPHA-NUMERIC CHARACTERS, ONLY, ARE ALLOWED.
(CIERR 2004).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2005 MESSAGE UNKNOWN KEYWORD. EXPECTED
:SHOWCATALOG SYNTAX IS: :SHOWCATALOG
[LISTFILE][;USER=username[.accountname]]. (CIERR
2005).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2006 MESSAGE TOO MANY PARAMETERS. EXPECTED
:SHOWCATALOG SYNTAX IS: :SHOWCATALOG
[LISTFILE][;USER=username[.accountname]]. (CIERR
2006).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2007 MESSAGE EXPECTED AN ACCOUNT NAME FOLLOWING THE ".".
(CIERR 2007).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command making
sure the account name follows the period.
---------------------------------------------------------------
2008 MESSAGE CAN'T HAVE A TARGETUSER SPECIFICATION OF
<USERNAME.@>. (CIERR 2008).
CAUSE The target user specification cannot contain
wildcards.
ACTION Reenter the command making sure the target user
specification does not use wildcards.
---------------------------------------------------------------
2009 MESSAGE UNKNOWN SYNTAX. EXPECTED :SETCATALOG
SYNTAX IS: :SETCATALOG [udcfile1
[,udcfile2...]][;SYSTEM][;ACCOUNT][;SHOW]
[;USER=username[.accountname]] (CIERR
2009).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2010 MESSAGE UNKNOWN SYNTAX. EXPECTED
:SHOWCATALOG SYNTAX IS: :SHOWCATALOG
[LISTFILE][;USER=username[.accountname]]. (CIERR
2010).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2011 MESSAGE UDCS NOT SET FOR TARGET USER DUE TO UNKNOWN
OPTION KEYWORD. VALID OPTIONS: HELP/NOHELP,
LIST/NOLIST, BREAK/NOBREAK, LOGON/NOLOGON.
(CIERR 2011).
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2012 MESSAGE UDC COMMAND MUST START WITH AN ALPHABETIC
CHARACTER. UDC'S NOT SET FOR TARGETUSER. (CIERR
2012).
CAUSE The UDC command does not start with an alphabetic
character.
ACTION Reenter the command making sure the UDC command
starts with an alphabetic character.
---------------------------------------------------------------
2013 MESSAGE UDC COMMAND NAME TOO LONG. UDC COMMAND NAME MUST
BE 1 TO 16 CHARACTERS LONG. UDC'S NOT SET FOR
TARGETUSER. (CIERR 2013).
CAUSE The UDC command name exceeded the maximum length of
16 characters.
ACTION Reenter the command making sure the UDC command
name is within the range of 1 to 8 characters.
---------------------------------------------------------------
2021 MESSAGE CAN NOT WRITE TO SHOWCATALOG LIST FILE - !.
(CIERR 2021)
CAUSE You may have backreferenced a file that is too
small to contain the contents of the UDC, or to
which you do not have write access.
ACTION If the listfile is too small, build it again and
specify a larger size with the DISC parameter. If
you do not have write access to the listfile,
specify another file to which you do have access
(or get access from the original creator of the
file.)
---------------------------------------------------------------
2022 MESSAGE FWRITE FILE NAME FAILED ON UDC LIST FILE - !.
(CIERR 2022)
CAUSE Same as the previous message (2021).
ACTION Same as the previous message (2021).
---------------------------------------------------------------
2023 MESSAGE ONLY ONE LIST FILE IN SHOWCATALOG COMMAND (CIERR
2023)
---------------------------------------------------------------
2024 MESSAGE WARN NO DELIMITER ON LIST FILE (CIERR 2024)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2028 MESSAGE TOO MANY CHARACTERS IN PARAMETER NAME DEFINITION,
255 MAXIMUM. (CIERR 2028)
CAUSE The parameter name definition exceeded the maximum
character length of 255 characters.
ACTION Reenter the command making sure the parameter name
definition contains less than 255 characters.
---------------------------------------------------------------
2029 MESSAGE TOO MANY CHARACTERS IN DEFAULT VALUE DEFINITION,
255 MAXIMUM. (CIERR 2029)
CAUSE The default value definition exceeded the maximum
character length of 255 characters.
ACTION Reenter the command making sure the default value
definition contains less than 255 characters.
---------------------------------------------------------------
2030 MESSAGE USER COMMAND NESTING DEPTH LEVEL HIT. (CIERR
2030)
CAUSE Same as the message.
ACTION Examine the user command for excessive recursion.
---------------------------------------------------------------
2031 MESSAGE FPOINT FAIL ON UDC FILE HEADER (CIERR 2031)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
2032 MESSAGE FPOINT FAIL ON FIRST UDC COMMAND LINE (CIERR
2032)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
2033 MESSAGE FPOINT FAIL ON GETTING NEXT UDC COMMAND LINE
(CIERR 2033)
CAUSE Same as the message.
ACTION Reissue the command.
---------------------------------------------------------------
2034 MESSAGE FPOINT FAIL ON LOGON UDC FILE HEADER (CIERR 2034)
CAUSE Internal error.
ACTION There is no action that you can take.
---------------------------------------------------------------
2035 MESSAGE TRYING TO SEARCH FOR UDCS ON NONEXISTENT LEVEL
(CIERR 2035)
---------------------------------------------------------------
2036 MESSAGE BAD UDC COMMAND ENTRY, NOT MATCH FILE - NOT
EXECUTED (CIERR 2036)
---------------------------------------------------------------
2037 MESSAGE TOO MANY CHARACTERS IN PARAMETER NAME, 255
MAXIMUM (CIERR 2037)
CAUSE The parameter name definition in a UDC or user
command file exceeded the maximum character length
of 255 characters.
ACTION Reenter the command making sure the parameter name
definition contains less than 255 characters.
---------------------------------------------------------------
2038 MESSAGE TOO MANY CHARACTERS IN PARAMETER VALUE, 255
MAXIMUM (CIERR 2038)
CAUSE The parameter value exceeded the maximum character
length of 255 characters.
ACTION Reenter the command making sure the parameter value
contains less than 255 characters.
---------------------------------------------------------------
2039 MESSAGE PARAMETERS DO NOT MATCH USER COMMAND DEFINITION.
(CIERR 2039)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2040 MESSAGE UDC DIRECTORY BUILD FAILED ON OBJECT (CIERR 2040)
CAUSE Internal error.
ACTION There is no action you can take.
---------------------------------------------------------------
2041 MESSAGE UDC DIRECTORY BUILD FAILED, CAN NOT ACCESS FILE
(CIERR 2041)
---------------------------------------------------------------
2042 MESSAGE UDC FILE NAME TOO LONG (CIERR 2042)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2043 MESSAGE NO PROCESS TO BUILD UDCS, FATAL ERROR (CIERR
2043)
CAUSE Internal error.
ACTION Call your support representative.
---------------------------------------------------------------
2044 MESSAGE ASTERISK CHARACTER LINE ALREADY SEEN IN UDC FILE
(CIERR 2044)
---------------------------------------------------------------
2045 MESSAGE ONLY ONE PARAMETER LINE IN USER COMMANDS (CIERR
2045)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2046 MESSAGE NO USER COMMAND IN FILE, EOF FOUND (CIERR 2046)
CAUSE You have an empty UDC file.
ACTION Put some UDCs in your UDC file before using the
SETCATALOG command on that UDC file.
---------------------------------------------------------------
2047 MESSAGE NO LANGUAGE PROMPT STRING FOR OPTION LINES (CIERR
2047)
---------------------------------------------------------------
2048 MESSAGE CAN NOT ADD ENTRY TO UDC DIRECTORY (CIERR 2048)
---------------------------------------------------------------
2049 MESSAGE HIT LIMIT OF CATALOGING UDC FILES (CIERR 2049)
CAUSE An attempt was made to catalog more than 50 UDC
files.
ACTION Use SETCATALOG DELETE to remove unecessary entries.
---------------------------------------------------------------
2050 MESSAGE TOO MANY UDC FILES TO CATALOG, 50 MAXIMUM (CIERR
2050)
CAUSE An attempt was made to catalog more than 50 UDC
files.
ACTION Use SETCATALOG DELETE to remove unecessary entries.
---------------------------------------------------------------
2051 MESSAGE HIT MAXIMUM FILE COUNTER, YOU NEED TO RE
SETCATALOG (CIERR 2051)
CAUSE Same as the message.
ACTION Use SETCATALOG DELETE to remove unecessary entries.
---------------------------------------------------------------
2052 MESSAGE WARN TOO MANY APPEND FILES, NO SETCATALOG DONE.
(CIERR 2052)
CAUSE Same as the message.
ACTION Use SETCATALOG DELETE to remove unecessary entries.
---------------------------------------------------------------
2053 MESSAGE WARN TOO MANY APPEND FILES AT PARSE, NO
SETCATALOG DONE (CIWARN 2053)
CAUSE Same as the message.
ACTION Use SETCATALOG DELETE to remove unecessary entries.
---------------------------------------------------------------
2054 MESSAGE WARN NO NEW UDC FILES WERE ADDED (CIWARN 2054)
CAUSE Information only.
ACTION None. Information only.
---------------------------------------------------------------
2055 MESSAGE FWRITE FNAME IN SHOW OPTION FAILED (CIERR 2055)
---------------------------------------------------------------
2056 MESSAGE DIRECTORY BUILD FAILED ON USER LEVEL (CIERR 2056)
---------------------------------------------------------------
2057 MESSAGE DIRECTORY BUILD FAILED ON ACCOUNT LEVEL (CIERR
2057)
---------------------------------------------------------------
2058 MESSAGE DIRECTORY BUILD FAILED ON SYSTEM LEVEL (CIERR
2058)
---------------------------------------------------------------
2059 MESSAGE CAN'T SPECIFY "USER" WITH "APPEND" OR "DELETE".
(CIERR 2059)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2060 MESSAGE WARN NO UDC DIRECTORY WAS BUILT OR EXISTS (CIWARN
2060)
---------------------------------------------------------------
2061 MESSAGE NAME LENGTH TOO LONG, 8 MAXIMUM (CIERR 2061)
CAUSE The name specified exceeded the maximum length of 8
characters.
ACTION Reenter the command making sure the name specified
is within the range of 1 to 8 characters.
---------------------------------------------------------------
2062 MESSAGE INVALID SETCATALOG FILE NAME = ! (CIERR 2062)
---------------------------------------------------------------
2063 MESSAGE DUPLICATE COMMAND NAME IN UDC FILE ! NOT ALLOWED.
(CIERR 2063)
CAUSE A UDC was cataloged with the same name as an
existing UDC.
ACTION Make sure that all UDCs in cataloged UDC files have
unique names. You may have to uncatalog the UDC
file, change the name of the duplicate UDC,
recatalog the UDC file, and then reenter the UDC.
---------------------------------------------------------------
2064 MESSAGE BAD SYNTAX IN USER COMMAND PARM HEADER LINE.
(CIERR 2064)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2065 MESSAGE BAD SYNTAX IN USER COMMAND OPTION HEADER LINE.
(CIERR 2065)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2066 MESSAGE BAD SYNTAX IN USER COMMAND HEADER LINE. (CIERR
2066)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
2067 MESSAGE JOB TABLE CORRUPTED, CANNOT DO UDCS. (CIERR 2067)
CAUSE Internal error.
ACTION There is no action you can take.
---------------------------------------------------------------
2068 MESSAGE SPECIAL CHARACTERS NOT ALLOWED IN UDC NAME.
(CIERR 2068)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------