HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd)
1319 MESSAGE THE DS LINE #L! IS IN USE BY A PROGRAM OR
SUBSYSTEM AND CANNOT BE CLOSED. (CIERR 1319)
CAUSE A request to close a DS line was issued for a line
in use by another program or subsystem.
ACTION None; the message is for information only.
---------------------------------------------------------------
1320 MESSAGE EXPECTED A RESPONSE OF YES, Y, NO OR N. (CIERR
1320)
CAUSE The response entered was not "YES", "Y", "NO" or
"N".
ACTION Enter a response of "YES", "Y", "NO" or "N".
---------------------------------------------------------------
1321 MESSAGE UNABLE TO OPEN THE DS LINE ON DEVICE !. (CIERR
1321)
CAUSE Same as the message.
ACTION Check with your system manager.
---------------------------------------------------------------
1322 MESSAGE @ IS INVALID IN THIS CONTEXT. (CIERR 1322)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1323 MESSAGE A DSLINE OPEN REQUIRES A VALID DS DEVICE NAME AS
THE FIRST PARAMETER. (CIERR 1323)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1324 MESSAGE FROM ADDRESS MUST BE BETWEEN 1 AND 15 CHARACTERS
INCLUSIVE. (CIERR 1324)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1325 MESSAGE TO ADDRESS MUST BE BETWEEN 1 AND 15 CHARACTERS
INCLUSIVE. (CIERR 1325)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1326 MESSAGE FROM AND TO ADDRESS MUST BE A DECIMAL NUMBER.
(CIERR 1326)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1350 MESSAGE INVALID OPTION SPECIFIED. MUST BE ONE OF:
STATUS, ALLOCATE, AUTO, ALL. (CIERR 1350)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1351 MESSAGE EXTRA PARAMETER SPECIFIED. COMMAND IGNORED.
(CIERR 1351)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1389 MESSAGE INVALID OR MISSING DELIMITER FOR SELECTION SIGNAL
SEQUENCE. (CIERR 1389)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1390 MESSAGE SELECTION SIGNAL SEQUENCE MUST BE FROM 1 TO 30
CHARACTERS. (CIERR 1390)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1391 MESSAGE BOTH QUEUE AND NOQUEUE SPECIFIED; NOQUEUE USED.
(CIWARN 1391)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1392 MESSAGE ONLY ! WORDS WERE ALLOCATED FOR THE LINE BUFFER.
(CIWARN 1392)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1393 MESSAGE COMPRESSION REQUEST NOT HONORED. REMOTE DOES NOT
SUPPORT THIS FEATURE. (CIWARN 1393).
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1394 MESSAGE COMPRESSION PARAMETER RESPECIFIES AND OVERRIDES
PREVIOUS COMPRESSION PARAMETER. (CIWARN 1394)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1395 MESSAGE OPEN PARAMETERS ENTERED ON A CLOSE REQUEST ARE
IGNORED. (CIERR 1395)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1396 MESSAGE AN ID LIST MUST CONTAIN 255 OR LESS ELEMENTS.
(CIWARN 1396)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1397 MESSAGE AN UNNECESSARY DELIMITER IS IGNORED. (CIWARN
1397)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1398 MESSAGE THERE ARE NO DS LINES OPEN. (CIWARN 1398)
CAUSE Same as message content.
ACTION Reenter the command when there are DS lines open.
---------------------------------------------------------------
1399 MESSAGE MULTIPLE USE OF ! IS REDUNDANT AND IGNORED.
(CIWARN 1399)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1400 MESSAGE WRONG DEVICE PASSWORD: ACCESS DENIED. (CIERR
1400)
CAUSE Syntax error.
ACTION Reenter the command making sure the correct device
password is specified.
---------------------------------------------------------------
1401 MESSAGE COMMAND IMAGE TOO LONG, MAXIMUM 243 CHARACTERS.
(CIERR 1401)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1402 MESSAGE EXPECTED HELLO, :JOB, :DATA, OR (CMD) AS LOGON.
(CIERR 1402)
CAUSE An incorrect logon was entered.
ACTION Reenter the command using a correct logon.
---------------------------------------------------------------
1403 MESSAGE LOGON DEVICE WON'T ALLOW THIS COMMAND. (CIERR
1403)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1404 MESSAGE WARNING: LINES PRECEDING :JOB/:DATA WERE
IGNORED. (CIWARN 1404)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1405 MESSAGE WARNING: EXPECTED :JOB OR :DATA. LINE IGNORED.
(CIWARN 1405)
CAUSE Syntax error.
ACTION None. Information only.
---------------------------------------------------------------
1406 MESSAGE WARNING: NO :JOB OR :DATA COMMAND ENCOUNTERED.
(CIWARN 1406)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1407 MESSAGE WARNING: LINES PRECEDING :EOF WERE IGNORED
(CIWARN 1407)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1408 MESSAGE TOO MANY FAILED ATTEMPTS, THIS DEVICE IS NOW
DISCONNECTED.
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1411 MESSAGE IDD FULL. CAN'T LOGON. SEE SYSTEM MANAGER.
(CIERR 1411)
CAUSE Same as message content.
ACTION Notify your system manager.
---------------------------------------------------------------
1412 MESSAGE JMAT FULL. CAN'T LOGON. SEE SYSTEM MANAGER.
(CIERR 1412)
CAUSE Same as message content.
ACTION Notify your system manager.
---------------------------------------------------------------
1413 MESSAGE CILOG TABLE FULL. CAN'T LOGON. SEE SYSTEM
MANAGER. (CIERR 1413)
CAUSE Same as message content.
ACTION Notify your system manager.
---------------------------------------------------------------
1421 MESSAGE (COMMAND) LOGON IS MISSING RIGHT PARENTHESIS.
(CIERR 1421)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1422 MESSAGE (COMMAND) LOGON IS MISSING LEFT PARENTHESIS.
(CIERR 1422)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1423 MESSAGE EXPECTED JOB NAME. (CIERR 1423)
CAUSE Same as message content.
ACTION Reenter the command with a job name.
---------------------------------------------------------------