HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
981 MESSAGE MISSING COLON BEFORE COMMAND NAME. (CIERR 981)
CAUSE A CI command was entered from a subsystem without
the preceeding colon.
ACTION Reenter the command with a preceeding colon to
indicate that the command is to be processed by the
Command Interpreter (CI).
---------------------------------------------------------------
984 MESSAGE REQUIRES FORMAL FILE DESIGNATOR. (CIERR 984)
CAUSE You entered incorrect syntax for the command.
ACTION Check the syntax in the reference manual and
reenter the command.
---------------------------------------------------------------
985 MESSAGE EXPECTED RESPONSE OF "YES" OR "NO". (CIWARN 985)
CAUSE A response other than "YES" or "NO" was received.
ACTION Enter a response of "YES" or "NO".
---------------------------------------------------------------
986 MESSAGE COMMAND NOT ALLOWED IN BREAK. (CIERR 986)
CAUSE The command entered is not allowed in the break
mode.
ACTION Do not issue this command while in the break mode.
---------------------------------------------------------------
988 MESSAGE A MAXIMUM OF 30 CONTINUATION LINES IS ALLOWED.
(CIERR 988)
CAUSE More than 30 continuation lines were entered.
ACTION Check the command entry and ensure that there are
no more than 30 continuation lines (a continuation
line is indicated with an ampersand (&) sign at the
end of the line).
---------------------------------------------------------------
989 MESSAGE PROGRAM ABORTED PER USER REQUEST. (CIERR 989)
CAUSE This message is a confirmation that a program was
terminated by the ABORT command following a break.
ACTION None. Information only.
---------------------------------------------------------------
990 MESSAGE EXPECTED "YES" OR "NO". (CIWARN 990)
CAUSE A response other than "YES" or "NO" was entered in
response to the "ABORT? (YES/NO)" message.
ACTION Enter YES or NO in response to the "ABORT?
(YES/NO)" message.
---------------------------------------------------------------
991 MESSAGE NO PARAMETERS ARE ALLOWED WITH "ABORT". (CIERR
991)
CAUSE An attempt was made to enter parameters with the
ABORT command.
ACTION Do not enter parameters with the ABORT command.
---------------------------------------------------------------
100 MESSAGE ERROR WHILE WRITING TO TAPE - STORE STOPPED.
(CIERR 1000)
CAUSE An error occurred while writing to a STORE tape.
ACTION Reenter the STORE command using a new tape.
---------------------------------------------------------------
1001 MESSAGE SPECIAL CHARACTER IN TAPE FILE NAME. (CIERR
1001)
CAUSE A special character was found in the specified tape
file name.
ACTION Reenter the tape file name making sure that valid
file naming conventions are used.
---------------------------------------------------------------
1002 MESSAGE EXPECTED ALPHABETIC CHARACTER TO START TAPE NAME.
(CIERR 1002)
CAUSE The first character of the start tape name was not
alphabetic.
ACTION Reenter the tape file name making sure that valid
file naming conventions are used.
---------------------------------------------------------------
1003 MESSAGE TAPE FILE NAME > 8 CHARACTERS LONG. (CIERR 1003)
CAUSE The tape file name entered exceeded the maximum
length of 8 characters.
ACTION Reenter the tape file name making sure that valid
file naming conventions are used.
---------------------------------------------------------------
1004 MESSAGE EXPECTED "*" INDICATING BACK REFERENCE FOR TAPE
FILE. (CIERR 1004)
CAUSE The name of the magnetic tape file containing the
files to be restored was not backreferenced with an
asterisk (*).
ACTION Use a FILE equation before invoking the RESTORE
command.
---------------------------------------------------------------
1005 MESSAGE TAPE FILE NAME IS A REQUIRED PARAMETER. (CIERR
1005)
CAUSE The tape file name was omitted with the command
entry.
ACTION Check the command syntax and reenter the command
(make sure the tape file name is included).
---------------------------------------------------------------
1006 MESSAGE SEMICOLON REQUIRED BETWEEN KEYWORDS. (CIERR
1006)
CAUSE A semicolon (;) is required to separate keywords.
ACTION Reenter the command making sure the keywords are
separated with semicolons.
---------------------------------------------------------------
1007 MESSAGE "FILES=" REDUNDANTLY SPECIFIED. LAST USED.
(CIWARN 1007)
CAUSE The "FILES=" parameter was specified more than
once.
ACTION None. The last "FILES=" parameter was used.
---------------------------------------------------------------
1008 MESSAGE EXPECTED "FILES=". (CIERR 1008)
CAUSE The "FILES=" parameter was missing from the command
entry.
ACTION Reenter the command making sure the "FILES="
parameter is included.
---------------------------------------------------------------
1009 MESSAGE EXPECTED FILE COUNT LIMIT BETWEEN 1 AND
2147483647. (CIERR 1009)
CAUSE The file count limit entered was less than 1 or
greater than 2,147,483,647.
ACTION Reenter the command making sure the file count
limit is within the range of 1 to 2,147,483,647.
---------------------------------------------------------------
1010 MESSAGE EXPECTED ONE OF "SHOW", "FILES", OR "DATE".
(CIERR 1010)
CAUSE Same as message content.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1011 MESSAGE MORE THAN ! PARAMETERS TO STORE COMMAND. (CIERR
1011)
CAUSE Too many parameters were specified with the command
entry.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1012 MESSAGE A TAPE FILE NAME IS REQUIRED. (CIERR 1012)
CAUSE A tape file name was not entered with the command.
ACTION Reenter the command making sure a tape file name is
included.
---------------------------------------------------------------
1013 MESSAGE UNEXPECTED "=" WHILE PARSING FILE SET NAMES.
(CIERR 1013)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1014 MESSAGE UNABLE TO OPEN LIST FILE. FORCED TO $STDLIST.
(CIWARN 1014)
CAUSE Same as message content.
ACTION None. Information only.
---------------------------------------------------------------
1015 MESSAGE INSUFFICIENT STACK TO DO STORE. (CIERR 1015)
CAUSE Same reason as the message indicates.
ACTION Alter the STORE file set and make it smaller. If
you are doing a native mode STORE (without
specifying TRANSPORT), you might try increasing the
size of the stack by issuing the :RUN STORE
command, and specifying the NM STACK= option with a
larger size stack. Refer to a utilities reference
manual for further information.
---------------------------------------------------------------
1016 MESSAGE FOPTIONS ON TAPE WRONG - SHOULD BE NOCCTL,
UNDEFINED RECORD FORMAT, BINARY, NEW. (CIERR 1016)
CAUSE The file format specified does not match the tape
format.
ACTION Issue a :FILE command to define a file equation
specifying the correct format. Reissue the
operation and backreference that file equation.
---------------------------------------------------------------
1017 MESSAGE AOPTIONS ON TAPE WRONG - SHOULD BE WAIT,
EXCLUSIVE, NO MULTIRECORD, WRITE ONLY. (CIERR
1017)
---------------------------------------------------------------
1018 MESSAGE CAN ONLY STORE TO TAPE OR SERIAL DISC. (CIERR
1018)
CAUSE A device other than a tape or disk was specified
with the STORE command.
ACTION Reenter the command making sure the device
specified is a tape or disk.
---------------------------------------------------------------
1019 MESSAGE IRRECOVERABLE ERROR ON SCRATCH FILE - STORE
STOPPED. (CIERR 1019)
CAUSE Same as the message.
ACTION Reenter the command using a different file for a
scratch file.
---------------------------------------------------------------
1020 MESSAGE DISK ERROR ON LABEL OF FILE ! - STORE STOPPED.
(CIERR 1020)
CAUSE An error occurred while reading the label of the
file.
ACTION Contact your Hewlett-Packard representative.
---------------------------------------------------------------
1021 MESSAGE BREAK WHILE DOING STORE. (CIWARN 1021)
CAUSE A break was entered during the store process.
ACTION None. Information only.
---------------------------------------------------------------
1022 MESSAGE UNEXPECTED SPECIAL CHARACTER IN FILESET. (CIERR
1022)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1025 MESSAGE ERROR WHEN USING SCRATCH FILE - RESTORE STOPPED.
(CIERR 1025)
CAUSE An error occurred when using the scratch file
during restore.
ACTION Reenter the command using a different scratch file.
---------------------------------------------------------------
1026 MESSAGE ERROR ACCESSING TAPE - RESTORE STOPPED. (CIERR
1026)
CAUSE An error occurred accessing the tape during a
restore operation.
ACTION Clean tape drive and try again.
---------------------------------------------------------------
1027 MESSAGE UNABLE TO REPORT RESULTS - LIST FILE ERROR.
(CIERR 1027)
CAUSE An error was encountered on the specified list
file.
ACTION Correct the list file specification, and reenter
the command.
---------------------------------------------------------------
1028 MESSAGE DISK I/O ERROR - RESTORE STOPPED. (CIERR 1028)
CAUSE There is a problem with the disk drive.
ACTION Contact your Hewlett-Packard representative.
---------------------------------------------------------------
1029 MESSAGE UNIDENTIFIED DIRECTORY ERROR - RESTORE STOPPED.
(CIERR 1029)
CAUSE Same as the message.
ACTION Verify the RESTORE device class and number. Then
reissue the command.
---------------------------------------------------------------
1030 MESSAGE CANNOT RESTORE TO VIRTUAL DEVICE. (CIERR 1030)
CAUSE Same as the message.
ACTION Contact your system manager for the correct device
class name.
---------------------------------------------------------------
1031 MESSAGE INVALID DEVICE CLASS NAME. (CIERR 1031)
---------------------------------------------------------------
1032 MESSAGE DEVICE CLASS NOT PRESENT ON SYSTEM. (CIERR 1032)
---------------------------------------------------------------
1033 MESSAGE NO SUCH LOGICAL DEVICE NUMBER IN THE SYSTEM.
(CIERR 1033)
CAUSE Same as message.
ACTION Contact your system manager for the correct LDEV
(logical device) number.
---------------------------------------------------------------
1034 MESSAGE MUST BE A DISK DEVICE. (CIERR 1034)
CAUSE Same as the message.
ACTION Contact your system manager for the correct LDEV
(logical device) number.
---------------------------------------------------------------
1035 MESSAGE TAPE APPARENTLY NOT A STORE TAPE. (CIERR 1035)
CAUSE The tape mounted for the restore operation is not a
store tape.
ACTION Reenter the RESTORE command making sure the tape
used is a store tape.
---------------------------------------------------------------
1036 MESSAGE OPERATOR UNABLE TO FIND NEXT TAPE VOLUME. (CIERR
1036)
CAUSE Same as message.
ACTION Verify the tape set, and mount the correct tape.
---------------------------------------------------------------
1037 MESSAGE LOGICAL DEVICE NUMBER ! NOT AVAILABLE FOR
RESTORE. (CIERR 1037)
CAUSE Same as the message.
ACTION Contact your system manager for the correct LDEV
number.
---------------------------------------------------------------
1038 MESSAGE IMPROPER TAPE FORMAT. (CIERR 1038)
CAUSE The specified STORE/RESTORE tape is invalid.
ACTION Check the mounted tape for the correct volume.
---------------------------------------------------------------
1039 MESSAGE NAME OF TAPE TO BE RESTORED IS REQUIRED. (CIERR
1039)
CAUSE The RESTORE command was entered without the name of
the tape to be restored.
ACTION Reenter the RESTORE command making sure the name of
the tape to be restored is entered.
---------------------------------------------------------------
1040 MESSAGE EXPECTED ";" SEPARATING COMMAND OPTIONS. (CIERR
1040)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1041 MESSAGE DEV OPTION REDUNDANTLY SPECIFIED, LAST USED.
(CIWARN 1041)
CAUSE The DEV option was specified more than once.
ACTION None. Information only. The last DEV option
specified is the one used.
---------------------------------------------------------------
1042 MESSAGE EXPECTED "DEV= [DEVICE NAME]". (CIERR 1042)
CAUSE The DEV option was omitted.
ACTION Reenter the command making sure the DEV= option is
specified.
---------------------------------------------------------------
1043 MESSAGE EXPECTED DEVICE NAME AFTER "DEV=". (CIERR 1043)
CAUSE The DEV= option was specified without a device
name.
ACTION Reenter the command making sure a device name is
specified.
---------------------------------------------------------------
1044 MESSAGE DEVICE NAME IS MORE THAN 8 CHARACTERS LONG.
(CIERR 1044)
CAUSE The device name specified with the DEV= option
exceeds eight characters.
ACTION Reenter the command making sure the device name is
less than or equal to eight charaters.
---------------------------------------------------------------
1045 MESSAGE EMBEDDED NON-ALPHANUMERIC CHARACTER IN DEVICE ID.
(CIERR 1045)
CAUSE Syntax error.
ACTION Reenter the command making sure a valid device name
is specified.
---------------------------------------------------------------
1046 MESSAGE NOT ENOUGH STACK SPACE AVAILABLE FOR RESTORE.
(CIERR 1046)
CAUSE Same as the message.
ACTION Alter the RESTORE file set or try to use the :RUN
RESTORE command. Refer to a system utility manual
for more information.
---------------------------------------------------------------
1047 MESSAGE FOPTIONS ON TAPE WRONG - SHOULD BE NOCCTL,
UNDEFINED RECORD FORMAT, BINARY, NEW. (CIERR 1047)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1048 MESSAGE AOPTIONS ON TAPE WRONG - SHOULD BE WAIT,
EXCLUSIVE, NO MULTIRECORD, READ ONLY. (CIERR 1048)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
1049 MESSAGE RESTORE TAPE RECORD SIZE MUST BE A MULTIPLE OF
256 WORDS AND BE BETWEEN 256 AND !, INCLUSIVE, FOR
THIS DEVICE. (CIERR 1049)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------