Getting Started as an MPE/iX Programmer Programmer's Guide : COPYRIGHT NOTICE [ Getting Started as an MPE/iX Programmer Programmer's Guide ] MPE/iX 5.0 Documentation
Getting Started as an MPE/iX Programmer Programmer's Guide
900 Series HP 3000 Computer Systems
Getting Started as an
MPE/iX Programmer
Programmer's Guide
HP Part No. 32650-90008
Printed in U.S.A.
Edition Second Edition
E0692
________________________________________________________________________
|The information contained in this document is subject to change |
|without notice. |
| |
|Hewlett-Packard makes no warranty of any kind with regard to this |
|material, including, but not limited to, the implied warranties of |
|merchantability or fitness for a particular purpose. Hewlett-Packard |
|shall not be liable for errors contained herein or for direct, |
|indirect, special, incidental or consequential damages in connection |
|with the furnishing or use of this material. |
| |
|Hewlett-Packard assumes no responsibility for the use or reliability |
|of its software on equipment that is not furnished by Hewlett-Packard.|
| |
|This document contains proprietary information which is protected by |
|copyright. All rights are reserved. Reproduction, adaptation, or |
|translation without prior written permission is prohibited, except as |
|allowed under the copyright laws. |
________________________________________________________________________
Copyright (c) 1992 by Hewlett-Packard Company
________________________________________________________________________
|Use, duplication, or disclosure by the U.S. Government is subject to |
|restrictions as set forth in subparagraph (c) (1) (ii) of the Rights |
|in Technical Data and Computer Software clause at DFARS 252.227-7013. |
|Rights for non-DoD U.S. Government Departments and agencies are as set|
|forth in FAR 52.227-19 (c) (1,2). |
| |
|Hewlett-Packard Company |
|3000 Hanover Street |
|Palo Alto, CA 94304 U.S.A. |
________________________________________________________________________
Restricted Rights Legend
Printed 1992
Printing History
The following table lists the printings of this document, together with
the respective release dates for each edition. The software version
indicates the version of the software product at the time this document
was issued. Many product releases do not require changes to the
document. Therefore, do not expect a one-to-one correspondence between
product releases and document editions.
Edition Date Software Version
---------------------------------------------------------------------------------------
First Edition November 1987 A.01.00
Update 1 July 1988 A.10.00
Update 2 December 1988 A.20.00
Second Edition June 1992 B.40.00
Preface
NOTE MPE/iX, Multiprogramming Executive with Integrated POSIX, is the
latest in a series of forward-compatible operating systems for the
HP 3000 line of computers.
In HP documentation and in talking with HP 3000 users, you will
encounter references to MPE XL, the direct predecessor of MPE/iX.
MPE/iX is a superset of MPE XL. All programs written for MPE XL
will run without change under MPE/iX You can continue to use MPE XL
system documentation, although it may not refer to features added
to the operating system to support POSIX (for example, hierarchical
directories).
Finally, you may encounter references to MPE V, which is the
operating system for HP 3000s, not based on PA-RISC architecture.
MPE V software can be run on the PA-RISC (Series 900) HP 3000s in
what is known as compatibility mode.
Getting Started as an MPE/iX Programmer is a manual designed to introduce
a programmer to the Hewlett-Packard MPE/iX operating system, which runs
on 900 Series HP 3000 computers. It provides:
* An overview of the operating system architecture, features, and
facilities, explaining the concepts necessary for a programmer to
obtain a working knowledge of the system.
* References to other manuals for detailed information, syntax, and
advanced concepts.
As a prerequisite, you should review the self-paced training course HP
3000 Series 900 Advanced Skills (32650-60039).
Getting Started as an MPE/iX Programmer is part of the Programmer's
Series. This series consists of the MPE/iX Intrinsics Reference Manual
(32650-90028) and a set of task-oriented user's guides.
MPE/iX 5.0 Documentation