HP 3000 Manuals HP 3000 Manuals
P (cmP) - The CM Program Window
The CM program window tracks the CM program counter (CMPC), displaying
the instructions that are being executed.
________________________________________________________________________________________
| |
| |
| cmP % PROG 0.1667 (E) SEG' CSTX 1 Level 0 |
| 001662: T|2| PROCESSSTUDENT+%255 031403 3. EXIT 3 |
| 001663: PROCESSSTUDENT+%256 077777 .. ADDM S-%77,I,X |
| 001664: PROCESSSTUDENT+%257 177777 .. LRA S-%77,I,X |
| 001665: [1] ?PROCESSSTUDENT 000700 .. DZRO, NOP |
| 001666: PROCESSSTUDENT+%261 151605 .. LDD Q-5 |
| 001667: > PROCESSSTUDENT+%262 170005 .. LRA P+5 |
| 001670: PROCESSSTUDENT+%263 000733 .. DZRO, INCA |
| |
________________________________________________________________________________________
window banner line
* cmP % - Abbreviation for the window and the current output display
radix for the window.
* PROG 0.1667 - The logical code address for the CM program counter.
If the window does not contain the CM program counter, then the value
is the logical code address of the first line in the window. In our
example, the CM program counter is currently at a program file,
logical segment number 0, at an offset of 1667 words. Other possible
logical segment types are GRP, PUB, LPUB, LGRP, SYS.
* (E) - The segment is (E) emulated or (T) translated.
* SEG' - The segment name for the current segment being displayed.
* CSTX 1 - The CSTX (or CST) absolute segment number.
* Level 0 - The current stack level. (Refer to the LEV command.)
window body line(s)
* offset: - The CM word offset (segment relative) for the instruction
line which is being displayed.
* breakpoints - Breakpoints are displayed between the offset and
instruction. Refer to the conventions pages for a description of all
possible breakpoint notations.
[1] process local breakpoint, index number 1
T|2| process local temporary breakpoint, count not
exhausted yet,index number 2.
* > - Flags the current program counter location.
* procedure-name+offset - The symbolic procedure name and the CM word
offset within the procedure.
* instruction (numeric, ASCII) - The instruction value is displayed
formatted in the current output base for the window, and then
displayed as two ASCII characters (for literals).
* instruction (disassembly) - The disassembled instruction value.