HP 3000 Manuals HP 3000 Manuals
SUMMARYCONF
Prints a summary report for one or more communications subsystems.
Syntax
SUMMARYCONF subsystem[, subsystem[,...]]
Parameters
subsystem The name of the subsystem(s) for which the report
will be generated. If more than one subsystem is
entered, a report will be printed for each
subsystem in the order given. If ALL is entered, a
report will be printed for every subsystem. Valid
entries are ALL, DTS, NETXPORT, SNANODE, NRJE, IMF,
DHCF, APPC, and RJE.
Description
SUMMARYCONF displays a summary report for a particular subsystem. This
command is identical to the Print Summary function in the NMMGR Output
Configuration screen.
Output is directed to the file defined in the file equation FORMLIST. If
FORMLIST is not defined, output is sent to $STDLIST.
When you use SUMMARYCONF to print a summary report for the distributed
terminal subsystem (DTS), you can also specify a summary option to
designate additional items in the DTS subsystem you wish to have
reported. You do so in one of two ways. The first way is to enter the
option on the same line as the command. For example:
SUMMARYCONF DTS,LINK
will cause a report to be generated for the DTS link configuration. You
can use this method regardless of whether you entered maintenance mode
from screen mode you are running a job to generate output.
You can use the second way to specify a summary option for the DTS
subsystem only if you have entered maintenance mode from screen mode.
This method is to enter SUMMARYCONF DTS at the NMMGR maintenance mode
prompt, with no option specified. A new prompt will appear, as follows:
DTS Summary>
You can enter the DTS print option at this prompt (see below). If you do
not want to generate any additional DTS reports, enter E[XIT] at the
prompt. You will be returned to the maintenance mode prompt.
The following DTS print summary options are available:
ALL Displays all DTS configuration information.
DTC [dtcname] Displays the configuration for all DTCs or for the
DTC whose name is specified in dtcname.
DTS Displays the DTS subsystem configuration parameters.
E[XIT] Leaves DTS Summary and returns you to the maintenance
mode prompt.
HELP Displays the available DTS summary options.
LDEV [ldev[/ldev]] Displays the configuration for all ldevs (logical
devices), a single ldev, or a range of ldevs.
LINK Displays the link configuration for the DTS.
PORT [dtcname Displays the configuration for all configured ports,
[card [port]]] all ports on a specified DTC, all ports on a
specified DTC and card, or for a specific DTC, card,
and port.
PROFILE [profile] Displays the configuration for all profiles or for a
specified profile.
X.25 Card Displays the information about the Host Based X.25
[card#[,option]] Card configuration.
OPTIONS: LEVEL12 Display the level 1 and 2
configuration.
LEVEL14 Display the level 3 configuration
miscellaneous configuration data.
PAD Display the Nailed PAD data.
SEC Display the PAD security data.
SYS Display the System to System
configuration data.
Example
To display the summary report for NETXPORT:
NMMGR>SUMMARYCONF NETXPORT
To display the summary report for profiles defined in the DTS subsystem:
NMMGR>SUMMARYCONF DTS,PROFILE
Or:
NMMGR>SUMMARYCONF DTS
DTS Summary>PROFILE