HP 3000 Manuals HP 3000 Manuals
STATUS DT[C]
Obtains configuration and status information about a particular DTC.
Security level: 2.
Syntax
________________________________________________________________________
| |
| |
|DT[C] dtcnum |
________________________________________________________________________
Parameter
dtcnum
This is the number TermDSM associates with a particular DTC. The DTC
command lists each DTC with its assigned number. This is also printed
when you make a mistake while typing in a DTC number.
Description
When this subcommand is entered, a large amount of information related to
the DTC is printed on the terminal.
Example
(status)
DTc #
POrt #,#,#
(carriage return to exit) ? DT 1
Machine Type = HP2345
DTC Node Name = DTC888888888888
NOVRAM Value :
= 00.00
Nodal address = 88-88-88-88-88-88
Boot Multicast address = 09-00-09-00-00-04
00-46
Host Node Address = 08-00-09-00-03-01
DTC Lan Multicast Addresses :
Probe Primary = 00-00-00-00-00-00
Probe Secondary = 00-00-00-00-00-00
LAN Analyst = 00-00-00-00-00-00
SIC SIC type SIC selftest status Ports (Good or x:bad)
--- ------------------- ------------------- ---------------------
5 (not installed)
4 (not installed)
3 (not installed)
2 RS-232 Direct OK GGGG GGGG
1 RS-422 Direct OK GGGG GGGG
0 RS-232 Modem OK GGGG GG
Version Numbers :
Managment Version = X.00.01.004
Lan Version = X.00.02.004
AFCP Version = X.00.03.004
ADCP Version = X.00.04.004
CPU ROM Version = A.00.01.16
SIC 1 ROM Version = A.00.01.16
SIC 2 ROM Version = A.00.01.16
SIC 3 ROM Version = A.00.01.16
SIC 4 ROM Version = A.00.01.16
SIC 5 ROM Version = A.00.01.16
SIC 6 ROM Version = A.00.01.16
Enabled Severities = $07F3
Severity : 2 Logged = 1 Lost = 0
Events Not Acked = 0
Event Total Retries = 0
MGR Pending MGR Requests = 1
MGR Pending Port Dumps = 0
MGR Cant Get Message = 0
MGR Unknown MP request = 0
MGR MP error Responses = 0
MGR Port Mux Busy = 0
RMP Total Retries = 0
AFCP counters :
Active Connections = 4
Receive Packets :
Data Packets = 115778
Acknowledgments = 256
Negative Acknowledgments = 0
Duplicate = 0
Out of Order = 0
Status Requests = 559
Transmit Packets :
Data Packets = 113589
Acknowledgments = 2760
Negative Acknowledgments = 0
Retransmit = 0
Window Probe = 0
LAN counters :
Receive :
All Frames = 0
To My Addr Frames = 0
CRC Errors = 0
No Resources = 0
Missed = 0
Transmit :
Total Sent = 116616
One Collision = 36
More Collisions = 23
Too Many Collisions = 0
Lost Carrier = 0
No Heart Beat = 0
No Ring Space = 0
Deferred = 1199
Late Collision = 0
Event Index 2
Reporting Task = AFCP
Severity = 2
Event = 1536
Procedure Number = 0
Report Time = 450
Connection = 1
The following is a brief explanation of key fields:
* Machine Type. The HP product number of the DTC.
* DTC Node Name. The user-assigned node name of the DTC.
* NOVRAM Value. A code that indicates location of Nodal address and
Boot Multicast address within DTC RAM.
* Nodal address. 802.3 station address of the DTC.
* Boot Multicast address. 802.3 multicast address which DTC uses when
requesting its code file.
* Host Node Address. 802.3 address of MPE/XL system that downloaded
the DTC.
* DTC Lan Multicast Addresses. These fields will be used by DTC
diagnostics in future releases.
* Selftest Status Readout. Provides results of most recent DTC
selftest. The first two columns list and identify SIC cards. The
next two columns show status of the SICs. For details on the DTC
selftest readout, refer to the description of the DIAG Selftest DTC
subcommand.
* Version Numbers. The version numbers of hardware and software
modules on the DTC.
The remaining fields provide a detailed record of DTC events. They tell
what events are being logged (by MPE XL) and list event frequencies.
This information can be used by HP support representatives for detailed
diagnosis of DTC problems. Further explanation of these fields is beyond
the scope of this manual.