HP 3000 Manuals

Netware 3.11 for the HP 3000 Installing and Administering Guide

PSERVER Parameters 

2.  Configuration

2.  Services Configuration

2.  Print Services Configuration

4.  PSERVER Parameters


          Figure 10-25.  PSERVER Parameters 

Start PSERVER at Product Startup 

Toggles INACTIVE/ACTIVE. Defaults to INACTIVE. Set to ACTIVE to allow
PSERVER to start automatically when the product is started with NW START.
(Also see Remote Printer Parameters).

Print Server/File Srever Attachment 

Toggles LOCAL or REMOTE. Use LOCAL if the print server name specified has
been configured using PCONSOLE for the PSERVER running on the MPE/iX
NetWare file server.  If the PCONSOLE printer configuration information
was configured on a different file server, set this parameter to REMOTE.
The default is LOCAL.

Remote Server Name 

If the "Print Server/File Server Attachment" parameter is set to REMOTE,
enter the name of the remote NetWare file server where the NetWare/iX
print server has been configured using PCONSOLE. The default is no name.

Print Server Name 

Local or remote PSERVER name.  This is the name that the NetWare/iX
PSERVER uses when started.  The default is NWIX_PSERVER.

Print Server Password 

Optional parameter.  If a password was entered when the print server was
configured with PCONSOLE, enter the same password here.  If the password
is not configured here, when the NetWare/iX PSERVER is started, you
receive a print server start up error.  The print server password can be
specified on the command line if the NetWare/iX PSERVER is manually
started as described in Chapter 6, Configure Host Print Services.  The
default is no password.

MPE/iX 5.5 Documentation