HP 3000 Manuals HP 3000 Manuals
Example Configurations
The following section shows some sample network configurations you can
create by modifying the default network using the Quick Configuration
option in SCONSOLE.
Change Frame Type and Server Name
Using your file server worksheet, this example assumes you want to rename
the file server, and also change the frame type.
See Table 2-3 for changing a configuration.
The default values are used for the following network parameters:
Table 2-2.
---------------------------------
| | |
| | Internal network number, |
| | |
---------------------------------
| | |
| | Device name, and |
| | |
---------------------------------
| | |
| | External network number |
| | |
---------------------------------
1. Log into the system:
:hello manager.sys,netware
2. Type:
:run sconsole
The Main menu for SCONSOLE is displayed.
3. At the select prompt, enter 1 for Quick Configuration then press
the <Enter> (or <Return>) key
4. The Quick Config Parameters screen is displayed. Make your
configuration changes as noted below.
5. Save your changes by pressing <Enter> at the request prompt, then,
when prompted, type y (for yes) to save your changes.
6. Exit SCONSOLE by typing e. Go to the section, Activate
Configuration Changes in this chapter.
Table 2-3. Changing a Configuration
---------------------------------------------------------------
| | |
| Configuration Items | Values |
| | |
---------------------------------------------------------------
| | |
| File Server Name (up to 40 | Enter the name from your File |
| characters) | Server Worksheet |
| | |
---------------------------------------------------------------
| | |
| Internal Network Number: | 3000FFFF (default used) |
| (exactly eight hexadecimal | |
| numbers | |
| | |
---------------------------------------------------------------
| | |
| Device Name (in lowercase | /dev/dlpi.dtslink (default |
| letters) | used) |
| | |
---------------------------------------------------------------
| | |
| Frame Type (toggles): | Toggle to the value from your |
| ETHERNET_802.3, | File Server Worksheet |
| ETHERNET_II, | |
| ETHERNET_802.2, or | |
| TOKEN(shy)-RING | |
| | |
---------------------------------------------------------------
| | |
| External Network Number: | 00000002 (default used) |
| (up to eight hexadecimal | |
| numbers) | |
| | |
---------------------------------------------------------------
Change Network to Token-Ring
This example assumes you have only token-ring, and want to change the
default network to token-ring. You must have already verified the device
file name exists, or created the device file name (see Chapter 1, Verify
Link Configuration for instructions). This example uses the device file
name: dev/dlpi.trlink. You must also change the frame type to
token-ring.
See Table 2-5 to change network Token-Ring.
The default values are used for the following network parameters:
Table 2-4.
---------------------------------
| | |
| | File server name, |
| | |
---------------------------------
| | |
| | Internal network number, |
| | and |
| | |
---------------------------------
| | |
| | External network number. |
| | |
---------------------------------
1. Log into the system:
:hello manager.sys,netware
2. Type:
:run sconsole
The Main menu for SCONSOLE is displayed.
3. At the select prompt, enter 1 for Quick Configuration then press
the <Enter> (or <Return>) key.
4. The Quick Config Parameters screen is displayed. Make your
configuration changes as noted below.
5. Save your changes by pressing <Enter> at the request prompt, and
replying y for yes to save changes when prompted.
6. Exit SCONSOLE by typing e. Go to the section, Activate
Configuration Changes in this chapter.
Table 2-5. Change Network Token-Ring
---------------------------------------------------------------
| | |
| Configuration Items | Values |
| | |
---------------------------------------------------------------
| | |
| File Server Name (up to 40 | NWIX_DEFAULT (default used) |
| characters) | |
| | |
---------------------------------------------------------------
| | |
| Internal Network Number: | 3000FFFF (default used) |
| (exactly eight hexadecimal | |
| numbers | |
| | |
---------------------------------------------------------------
| | |
| Device Name (in lowercase | /dev/dlpi.trlink (must match |
| letters) | your configuration) |
| | |
---------------------------------------------------------------
| | |
| Frame Type (toggles): | TOKEN-RING |
| ETHERNET_802.3, | |
| ETHERNET_II, | |
| ETHERNET_802.2, or | |
| TOKEN(shy)-RING | |
| | |
---------------------------------------------------------------
| | |
| External Network Number: | 00000002 (default used) |
| (up to eight hexadecimal | |
| numbers) | |
| | |
---------------------------------------------------------------
Add Another NetWare Network
When you add another LAN card to your system, you must configure another
network for NetWare/iX using the SCONSOLE "Add a Network" function. See
Chapter 7, Advanced Configuration for these procedures. For each
additional network you want to configure, make a copy of the second page
of the File Server Worksheet to note your configuration items.
Activate Configuration Changes
To activate any configuration changes you have made, NetWare must be
stopped (if running), and restarted as described in Chapter 3, Start and
Stop NetWare.