HP 3000 Manuals HP 3000 Manuals
The Calculation Specification Default Summary
If you leave the optional fields of the Calculation Specifications blank,
the defaults shown in Table 8-18 apply:
Table 8-23. Calculation Specification Defaults
----------------------------------------------------------------------------------------------
| | | |
| Columns | Field | Default Values |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| 1-5 | Sequence Number | No sequence number applies. |
| | | |
| 7-8 | Control Level | The operation is performed at detail time. |
| | | |
| 9-17 | Indicators | Operation done for every record if the Control |
| | | Level Field does not contain L0-L9 or SR. |
| | | |
| 43-48 | Result | No result applies. |
| | | |
| 49-51 | Field Length | This is an alphanumeric field, or a numeric field |
| | | described elsewhere in the program. |
| | | |
| 52 | Decimal Positions | This is an alphanumeric field, or a numeric field |
| | | described elsewhere in the program. |
| | | |
| 53 | Half Adjust | Do not half adjust data. |
| | | |
| 54-59 | Resulting Indicators | No indicator assigned. |
| | | |
| 60-74 | Comments | No comments made. |
| | | |
| 75-80 | Program Name | None. |
| | | |
----------------------------------------------------------------------------------------------