HP 3000 Manuals HP 3000 Manuals
Displaying SNA Session Status Information
You can display status information about your SNA LU-LU session while you
are running Pass Thru. Configure the STATUS softkey in your PTCONFIG
file, as shown in chapter 2, "Configuring Pass Thru," and in appendix D,
"Sample PTCONFIG File."
Once your STATUS softkey is configured, you can press it while running
Pass Thru, and status information will appear on your terminal's screen.
Here is an example of the type of information that might appear on your
screen:
_____________________________________________________________________________
| |
| S N A S E S S I O N S T A T U S I N F O R M A T I O N |
| |
| SNA NODE PU3000E NAU NAME LU0004 |
| |
| SNA CLASS IMFCLASS NAU NUMBER 4 |
| |
| HOST LU NAME LU30004E |
| |
| SESSION TYPE UNOWNED HP LOGICAL DEVICE NUMBER 32|
| |
| SEGMENTS RECEIVED SINCE LAST INQUIRY 0 |
| |
| SEGMENTS SENT SINCE LAST STATUS INQUIRY 0 |
| |
| Press The ENTER Key To Refresh Previous Screen |
| |
_____________________________________________________________________________
The STATUS display has the following fields:
SNA NODE:
The configured SNA node nameyou are using to communicate with the IBM
host.
SNA CLASS:
The configured SNA class nameyou are using in the HP 3000 network.
HOST LU NAME:
The host LU nameyou are using in the HP 3000 network.
SESSION TYPE:
Indicates whether you are in an LU-LU or unowned session.
NAU NAME:
The NAU nameyou are using in the HP 3000 network.
NAU NUMBER:
The NAU numberyou are using in the HP 3000 network.
HP LOGICAL
DEVICE NUMBER:
The logical device numberyou are using in the HP 3000 network.
SEGMENTS RECEIVED
SINCE LAST INQUIRY:
The number of packets receivedsince the last status inquiry.
SEGMENTS SENT
SINCE LAST STATUS\ INQUIRY:
The number of packets transmitted
since the last status inquiry.