HP 3000 Manuals HP 3000 Manuals
SNA NRJE Error Messages (continued)
---------------------------------------------------------------------------------------
225 MESSAGE UNABLE TO RESOLVE PUNCH DESTINATION BACKREFERENCE.
(INT=225)
CAUSE Backreferenced print destination for SUBMIT or
NRJE2Submit cannot be resolved with the user's file
equations.
ACTION Check your spelling or your file equations.
---------------------------------------------------------------------------------------
226 MESSAGE UNABLE TO RESOLVE FORMS DESTINATION BACKREFERENCE.
(INT=226)
CAUSE Backreferenced print destination for SUBMIT or
NRJE2Submit cannot be resolved with the user's file
equations.
ACTION Check your spelling or your file equations.
---------------------------------------------------------------------------------------
227 MESSAGE ERROR IN ACCESSING CONFIGURATION FILE. (INT=227)
CAUSE A severe error may have occurred. Another, more
specific message should follow this.
ACTION See the message following this one to determine the
error.
---------------------------------------------------------------------------------------
228 MESSAGE UNABLE TO CLOSE PRINT DESTINATION FILE AFTER TEST-
OPENING. (INT=228)
CAUSE SUBMIT or NRJE2Submit test most output destinations
to be sure they're there. NRJE was unable to close
the print destination file after test-opening it.
A file system related error. A file system error
message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
229 MESSAGE UNABLE TO CLOSE PUNCH DESTINATION FILE AFTER TEST-
OPENING. (INT=229)
CAUSE SUBMIT and NRJE2Submit test most output
destinations to be sure they're there. NRJE was
unable to close the punch destination file after
test-opening it. A file system related error. A
file system error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
230 MESSAGE UNABLE TO CLOSE FORMS DESTINATION FILE AFTER TEST-
OPENING. (INT=230)
CAUSE SUBMIT and NRJE2Submit test most output
destinations to be sure they're there. NRJE was
unable to close the forms destination file after
test-opening it. A file system related error. A
file system error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
231 MESSAGE UNABLE TO TEST-OPEN PRINT DESTINATION FILE.
(INT=231)
CAUSE SUBMIT and NRJE2Submit test most output
destinations (by opening them) to be sure they're
there. A file system related error. A file system
error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
232 MESSAGE UNABLE TO TEST-OPEN PUNCH DESTINATION FILE.
(INT=232)
CAUSE SUBMIT and NRJE2Submit test most output
destinations (by opening them) to be sure they're
there. A file system related error. A file system
error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
233 MESSAGE UNABLE TO TEST-OPEN FORMS DESTINATION FILE.
(INT=233)
CAUSE SUBMIT and NRJE2Submit test most output
destinations (by opening them) to be sure they're
there. A file system related error. A file system
error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
234 MESSAGE UNABLE TO CLOSE JOB SPOOL FILE DURING ERROR
CLEANUP. (INT=234)
CAUSE While trying to clean up from a previous file
system error in preparation for an error return,
SUBMIT or NRJE2Submit was unable to close the
currently open output spool file. Any file system
error message following this message refers not to
this error but to the original file system error.
ACTION Exit NRJE to close the spool file. Then use SPOOK
(or NRJE) to delete it. Report problems of this
nature to your HP representative.
---------------------------------------------------------------------------------------
235 MESSAGE COMPACTION OF INPUT FILES IS NOT SUPPORTED. INPUT
FILE #!. (INT=235)
CAUSE A compaction SCB was found in the input file
specified or one of its ##FD include files.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
236 MESSAGE UNABLE TO WRITE INPUT DATA OF FILE #! TO SPOOL
FILE. (INT=236)
CAUSE A file system related error . A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
237 MESSAGE UNABLE TO WRITE INPUT DATA OF FILE #! TO SPOOL
FILE. (INT=237)
CAUSE A file system related error . A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
CAUSE One cause of this message is an invalid JOB card.
If this message is caused by an invalid JOB card,
no file system error message will follow.
ACTION Check the format of the JOB card for the first
input file specified in your SUBMIT command. Make
sure it meets the specifications of the host JCL.
---------------------------------------------------------------------------------------
238 MESSAGE UNABLE TO WRITE INPUT DATA OF FILE #! TO SPOOL
FILE. (INT=238)
CAUSE A file system related error . A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
239 MESSAGE UNABLE TO READ FROM TEMPORARY FILE. INPUT FILE #!.
(INT=239)
CAUSE A file system error has occurred. A file system
error message will follow.
ACTION Determine the cause by inspecting the file system
error message and correct the problem. See
"Problem Resolution" in chapter 5 of this manual,
and contact your HP representative for assistance.
---------------------------------------------------------------------------------------
240 MESSAGE READ LENGTH <> WRITE LENGTH. INPUT FILE #!.
(INT=240)
CAUSE A severe error has occurred.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
241 MESSAGE NLINFO ERROR #! WHILE LOADING FROM HOST
TRANSLATION TABLE. (INT=241)
CAUSE SUBMIT or NRJE2Submit was unable to load the "from
host" translation table because of a "Native
Language Support" error. The ! parameter is the
Native Language error code.
ACTION Determine the cause by inspecting the Native
Language error code and correct the problem.
---------------------------------------------------------------------------------------
242 MESSAGE UNABLE TO CLOSE CONSOLE TEMPORARY FILE. (INT=242)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem. See
"Problem Resolution" in chapter 5 of this manual,
and contact your HP representative for assistance.
---------------------------------------------------------------------------------------
243 MESSAGE NO FILENAME FOLLOWING ##FD IN INPUT FILE #!.
(INT=243)
CAUSE An MPE filename is expected following ##FD in
columns 1-4 of an input record. The ! parameter
is the number of the file in order of input to
SUBMIT or NRJE2Submit.
ACTION Locate and correct the ##FD record in error.
---------------------------------------------------------------------------------------
244 MESSAGE "N" SPECIFIED TWICE IN ##FD OPTIONS - INPUT FILE
#!. (INT=244)
CAUSE An ##FD syntax error. The ! parameter is the
number of the file in order of input to SUBMIT or
NRJE2Submit.
ACTION Locate and correct the ##FD record in error.
---------------------------------------------------------------------------------------
245 MESSAGE "T" SPECIFIED TWICE IN ##FD OPTIONS - INPUT FILE
#!. (INT=245)
CAUSE An ##FD syntax error. The ! parameter is the
number of the file in order of input to SUBMIT or
NRJE2Submit.
ACTION Locate and correct the ##FD record in error.
---------------------------------------------------------------------------------------
247 MESSAGE INVALID TRANSPARENT JOB CARD IN INPUT FILE #!.
(INT=247)
CAUSE Only host console commands and ##FD records that
include host console commands are allowed prior to
the first nontransparent job card. A transparent
job card was encountered before a nontransparent
job card. The ! parameter is the number of the
file in the order input to SUBMIT or NRJE2Submit.
ACTION Correct the job stream.
---------------------------------------------------------------------------------------
248 MESSAGE DATA PRECEDES JOB CARD IN INPUT FILE #!. (INT=248)
CAUSE Only host console commands and ##FD records that
include host console commands are allowed prior to
the first nontransparent job card. Something else
was encountered. The ! parameter is the number of
the file in the order input to SUBMIT or
NRJE2Submit.
ACTION Correct the job stream.
---------------------------------------------------------------------------------------
249 MESSAGE UNABLE TO OPEN OUTPUT SPOOL FILE. INPUT FILE #!.
(INT=249)
CAUSE A file system related error. A file system error
message will appear after this message. The !
parameter is the number of the file being processed
in order input to SUBMIT or NRJE2Submit.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
250 MESSAGE UNABLE TO REWIND FILEQ TEMPORARY FILE. (INT=250)
CAUSE A file system related error. A file system error
message follows this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem. Notify
Hewlett-Packard if you cannot determine the cause.
---------------------------------------------------------------------------------------
251 MESSAGE THE NRJE LOGICAL READER IS INCORRECTLY CONFIGURED.
(INT=251)
CAUSE The NRJE logical reader should be configured as a
type 2, subtype 22 device.
ACTION Correct the reader configuration.
---------------------------------------------------------------------------------------
252 MESSAGE $NULL, $STDLIST, $NEWPASS NOT ALLOWED AS INPUT
FILES. (INT=252)
CAUSE These system files are not allowed as input to
SUBMIT or NRJE2Submit.
ACTION Correct and reissue.
---------------------------------------------------------------------------------------
253 MESSAGE PRINT DESTINATION MUST BE LESS THAN 86 CHARACTERS.
(INT=253)
CAUSE The print destination for SUBMIT or NRJE2Submit
must be between 1 and 86 characters if one is
supplied.
ACTION Correct the print destination.
---------------------------------------------------------------------------------------
254 MESSAGE PUNCH DESTINATION MUST BE LESS THAN 86 CHARACTERS.
(INT=254)
CAUSE The punch destination for SUBMIT or NRJE2Submit
must be between 1 and 86 characters if one is
supplied.
ACTION Correct the punch destination.
---------------------------------------------------------------------------------------
255 MESSAGE FORMS DESTINATION MUST BE LESS THAN 86 CHARACTERS.
(INT=255)
CAUSE The forms destination for SUBMIT or NRJE2Submit
must be between 1 and 86 characters if one is
supplied.
ACTION Correct the forms destination.
---------------------------------------------------------------------------------------
256 MESSAGE OUTPUT DESTINATIONS MAY NOT RESOLVE TO SYSTEM
FILES. (INT=256)
CAUSE The print, punch, or forms destination resolved to
$FileName. This is not supported in NRJE II.
ACTION Correct the output destination.
---------------------------------------------------------------------------------------
257 MESSAGE INVALID OUTPUT DESTINATION BACKREFERENCE. (INT=257)
CAUSE A non-alphanumeric character was found in an output
destination backreference.
ACTION Correct the output destination.
---------------------------------------------------------------------------------------
258 MESSAGE UNABLE TO WRITE JOBLOG RECORD TO SPOOL FILE. INPUT
FILE #!. (INT=258)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
259 MESSAGE FILE SUBCODE OUT OF RANGE - INPUT FILE #!.
(INT=259)
CAUSE The subcode of an input file must be between 0 and
2. The ! parameter is the file number in order
input to SUBMIT or NRJE2Submit.
ACTION Correct subcode array element to a value within
range.
---------------------------------------------------------------------------------------
260 MESSAGE RECORD TYPE OUT OF RANGE - INPUT FILE #!.
(INT=260)
CAUSE A severe error has occurred.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
261 MESSAGE NRJE2SUBMIT INTERNAL ERROR. (INT=261)
CAUSE A severe error has occurred.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
263 MESSAGE N[OTRANSLATE] ##FD OPTION INCOMPATIBLE WITH SUBMIT
DIRECT. (INT=263)
CAUSE The ##FD option N[OTRANSLATE] cannot be used within
a job that is submitted with the ";DIRECT" option,
i.e. jobs already translated cannot be submitted
;DIRECT.
ACTION Correct the problem and resubmit the job.
---------------------------------------------------------------------------------------
264 MESSAGE MISSING ")" ON ##FD RECORD OPTION LIST IN INPUT
FILE #!. (INT=264)
CAUSE The correct syntax for a ##FD record is: ##FD
filename (optionlist). The ! parameter is the
file index in order of input to SUBMIT or
NRJE2Submit.
ACTION Correct the ##FD record and resubmit the job.
---------------------------------------------------------------------------------------
265 MESSAGE FILE ERROR WHILE CHECKING PRINT DESTINATION.
(INT=265)
CAUSE A file system related error. A file system error
message follows this message. NRJE, after
successfully test-opening the print destination,
was unable to obtain information about it.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
266 MESSAGE FILE ERROR WHILE CHECKING PUNCH DESTINATION.
(INT=266)
CAUSE A file system related error. A file system error
message follows this message. NRJE, after
successfully test-opening the punch destination,
was unable to obtain information about it.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
269 MESSAGE COMMAND ERROR #!. PARM #! IN ERROR. (INT=269).
CAUSE An error occurred in programmatically executing the
command RESET N1234567.
ACTION Determine the cause (possibly with your HP
representative's help) by examining the error codes
and correct the problem.
---------------------------------------------------------------------------------------
270 MESSAGE COMMAND ERROR #!. PARM #! IN ERROR. (INT=270).
CAUSE An error occurred in programmatically executing the
command FILE N1234567 = EQUATES,OLDTEMP.
ACTION Determine the cause (possibly with your HP
representative's help) by examining the error
codes, and then correct the problem. See "Problem
Resolution" in chapter 5 of this manual, and
contact your HP representative for assistance.
---------------------------------------------------------------------------------------
271 MESSAGE ",NEW" NOT VALID IN PRINT DESTINATION. (INT=271)
CAUSE Output destination files must have been built
before the job is submitted.
ACTION Build the output destination file and correct the
file designator and/or file equations.
---------------------------------------------------------------------------------------
272 MESSAGE ",NEW" NOT VALID IN PUNCH DESTINATION. (INT=272)
CAUSE Output destination files must have been built
before the job is submitted.
ACTION Build the output destination file and correct the
file designator and/or file equations.
---------------------------------------------------------------------------------------
273 MESSAGE ",NEW" NOT VALID IN FORMS DESTINATION. (INT=273)
CAUSE Output destination files must have been built
before the job is submitted.
ACTION Build the output destination file and correct the
file designator and/or file equations.
---------------------------------------------------------------------------------------
274 MESSAGE UNABLE TO REWIND CONSOLE CMD TEMPORARY FILE. INPUT
FILE #!. (INT=274)
CAUSE A file system related error. A file system error
message follows this message.
ACTION Determine the cause by inspecting the file system
error message, and then correct the problem.|
CAUSE A severe error has occurred.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
275 MESSAGE UNABLE TO FCONTROL CONSOLE CMD TEMPORARY FILE.
INPUT FILE #!. (INT=275)
CAUSE A file system related error. A file system error
message follows this message.
ACTION Determine the cause by inspecting the file system
error message, and then correct the problem.|
CAUSE A severe error has occurred.
ACTION See "Problem Resolution" in chapter 5 of this
manual, and contact your HP representative for
assistance.
---------------------------------------------------------------------------------------
276 MESSAGE UNABLE TO WRITE "DIRECT" TO SPOOL FILE FROM INPUT
FILE #!. (INT=276)
CAUSE A file system related error. A file system error
message follows this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
277 MESSAGE INVALID PRINT DESTINATION. (INT=277)
CAUSE Specified print destination does not appear to be
an actual file name, a backreferenced file, an
ldev, a formid, or a device class.
ACTION Correct the problem.
---------------------------------------------------------------------------------------
278 MESSAGE INVALID PUNCH DESTINATION. (INT=278)
CAUSE Specified punch destination does not appear to be
an actual file name, a backreferenced file, an
ldev, a formid, or a device class.
ACTION Correct the problem.
---------------------------------------------------------------------------------------
279 MESSAGE INVALID FORMS DESTINATION. (INT=279)
CAUSE Specified forms destination does not appear to be
an actual file name, a backreferenced file, an
ldev, a formid, or a device class.
ACTION Correct the problem.
---------------------------------------------------------------------------------------
280 MESSAGE ONE OF THE PARAMETERS IS OUT OF BOUNDS: SEG# !,
P=!. (INT=280)
CAUSE One or more of the parameters passed to NRJEHJInfo
(SHOW;HJ=) is not within the user's stack boundary.
SEG# ! (code segment #) and P=! (program counter)
are the return address after the intrinsic call.
If this error was returned when you typed
SHOW;HJ=... from the NRJE command interpreter,
then a severe error has occurred.
ACTION If you are calling NRJEHJInfo directly, check all
of the parameters passed to the intrinsic, correct
the problem, and call it again. If you typed
SHOW;HJ=..., see "Problem Resolution" in chapter 5
of this manual, and contact your HP representative
for assistance.
---------------------------------------------------------------------------------------
281 MESSAGE USER.ACCT MUST BE BETWEEN 1 AND 17 CHARACTERS LONG.
(INT=281)
CAUSE The UserName.AcctName length is out of range.
ACTION Correct the problem and execute again.
---------------------------------------------------------------------------------------
282 MESSAGE INCOUNT FOR NRJEHJINFO IS < 0. (INT=282)
CAUSE The InCount parameter for the NRJEHJInfo intrinsic
is out of the allowable range.
ACTION Pass an InCount parameter to NRJEHJInfo that's
greater than 0.
---------------------------------------------------------------------------------------
283 MESSAGE JOBLISTLEN FOR NRJEHJINFO IS < 0. (INT=283)
CAUSE The JoblistLen parameter for the NRJEHJInfo
intrinsic is out of the allowable range. A list of
host job names and numbers cannot have a negative
number of elements.
ACTION Pass a JoblistLen parameter to NRJEHJInfo that's
greater than 0.
---------------------------------------------------------------------------------------
284 MESSAGE UNABLE TO OPEN JOBLOG. (INT=284)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
285 MESSAGE UNABLE TO CLOSE JOBLOG. (INT=285)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
286 MESSAGE UNABLE TO LOCK JOBLOG. (INT=286)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
287 MESSAGE FFINDBYKEY ERROR ON JOBLOG. (INT=287)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
288 MESSAGE UNABLE TO READ FROM JOBLOG. (INT=288)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
289 MESSAGE UNABLE TO UNLOCK JOBLOG. (INT=289)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
290 MESSAGE INVALID USERNAME. (INT=290)
CAUSE The username in the SHOW command or the NRJEHJInfo
intrinsic parameter is not in the proper form for a
UserName.AcctName or @.
ACTION Correct the username.
---------------------------------------------------------------------------------------
291 MESSAGE NM CAPABILITY REQUIRED TO SHOW OTHER'S TRANSMITTED
JOBS. (INT=291)
CAUSE The user's logon account doesn't match the
UserName.AcctName specified in the SHOW command or
NRJEHJInfo intrinsic.
ACTION A user must have NM capability to manipulate jobs
submitted outside the logon UserName.AcctName.
---------------------------------------------------------------------------------------
292 MESSAGE EITHER USERNAME OR JOBLIST MUST BE SUPPLIED.
(INT=292)
CAUSE Neither a UserName nor a list of host job names and
numbers was supplied to the SHOW command or
NRJEHJInfo intrinsic. One or the other must be
supplied.
ACTION Make sure that either a UserName or JobList is
supplied and that UserNameLen or JobListLen is
greater than 0 (NRJEHJInfo).
---------------------------------------------------------------------------------------
293 MESSAGE STARTPOS MUST BE GREATER THAN 0. (INT=293)
CAUSE The StartPos parameter to NRJEHJInfo must be
greater than or equal to 1. StartPos is out of
range.
ACTION Make sure the value is in range.
---------------------------------------------------------------------------------------
294 MESSAGE DISALLOWED CONSOLE COMMAND STRIPPED FROM JOB
STREAM. (INT=294)
CAUSE Users without NM capability are allowed to insert
in a job stream only those host commands specified
in the configuration file.
ACTION No action is required.
---------------------------------------------------------------------------------------
295 MESSAGE CONFIGURATION FILE ACCESS ERROR. (INT=295)
CAUSE The SHOW command or NRJEHJInfo intrinsic was unable
to access the workstation information. A more
specific configuration file error message should
follow this one.
ACTION Determine the cause, if possible, by inspecting the
message that follows this, and correct the problem.
If the problem still occurs, contact your HP
representative for assistance.
---------------------------------------------------------------------------------------
296 MESSAGE CONFIGURED JOBLOG BELONGS TO ANOTHER WORKSTATION.
(INT=296)
CAUSE A job log file label specifies the workstation that
owns the job log. The configuration file specifies
the job log file that each workstation owns. The
job log file specified for this workstation has a
label naming a different workstation as owner.
Possible configuration error.
ACTION Check that the configuration file specifies the
appropriate job log for the workstation. If the
problem still occurs, contact your HP
representative for assistance.
---------------------------------------------------------------------------------------
297 MESSAGE UNABLE TO READ JOBLOG FILE LABEL. (INT=297)
CAUSE A file system related error. A file system error
message will appear after this message.
ACTION Determine the cause by inspecting the file system
error message and correct the problem.
---------------------------------------------------------------------------------------
300 MESSAGE FAILED TO OPEN NEW JOBLOG FILE. (INT=300)
CAUSE Internal software error. Possibly out of disc
space on the system.
ACTION Contact your HP representative.
---------------------------------------------------------------------------------------
304 MESSAGE FPOINT ERROR ON JOBLOG FILE. (INT=304)
CAUSE
ACTION
---------------------------------------------------------------------------------------
305 MESSAGE ERROR READING FROM JOBLOG FILE. (INT=305)
CAUSE
ACTION
---------------------------------------------------------------------------------------
306 MESSAGE UNABLE TO DELETE A JOBLOG RECORD. (INT=306)
CAUSE
ACTION
---------------------------------------------------------------------------------------
307 MESSAGE ERROR READING FROM JOBLOG FILE. (INT=307)
CAUSE
ACTION
---------------------------------------------------------------------------------------
308 MESSAGE ERROR WRITING TO NEW JOBLOG FILE. (INT=308)
CAUSE
ACTION
---------------------------------------------------------------------------------------
309 MESSAGE ERROR WHILE ATTEMPTING TO LOCK JOBLOG FILE.
(INT=309)
CAUSE
ACTION
---------------------------------------------------------------------------------------
310 MESSAGE READ ERROR ON LOOKUP TABLE. (INT=310)
CAUSE
ACTION
---------------------------------------------------------------------------------------
311 MESSAGE LOOKUP TABLE IS EMPTY. (INT=311)
CAUSE NRJE attempted to load a Lookup Table that has no
entries.
ACTION Rebuild designated Lookup Table and restart
workstation.
---------------------------------------------------------------------------------------
312 MESSAGE READ ERROR ON LOOKUP TABLE. (INT=312)
CAUSE
ACTION
---------------------------------------------------------------------------------------
313 MESSAGE DMOVOUT ERROR WHILE ATTEMPTING TO LOAD LOOKUP
TABLE. (INT=313)
CAUSE
ACTION
---------------------------------------------------------------------------------------
314 MESSAGE WRITE ERROR WHILE ATTEMPTING TO LOAD LOOKUP TABLE.
(INT=314)
CAUSE
ACTION
---------------------------------------------------------------------------------------
315 MESSAGE READ ERROR ON LOOKUP TABLE. (INT=315)
CAUSE
ACTION
---------------------------------------------------------------------------------------
316 MESSAGE DMOVOUT ERROR WHILE ATTEMPTING TO LOAD LOOKUP
TABLE. (INT=316)
CAUSE
ACTION
---------------------------------------------------------------------------------------
317 MESSAGE LOOKUP TABLE MUST BE LESS THAN 260 BYTES IN WIDTH.
(INT=317)
CAUSE Record length out of bounds.
ACTION Rebuild Lookup Table < 260 bytes.
---------------------------------------------------------------------------------------
318 MESSAGE FFILEINFO ERROR WHILE ACCESSING LOOKUP TABLE.
(INT=318)
CAUSE
ACTION
---------------------------------------------------------------------------------------
320 MESSAGE FAILED TO OPEN LOOKUP TABLE. (INT=320)
CAUSE
ACTION
---------------------------------------------------------------------------------------
321 MESSAGE FFILEINFO ERROR WHILE ACCESSING LOOKUP TABLE.
(INT=321)
CAUSE
ACTION
---------------------------------------------------------------------------------------
322 MESSAGE FAILED TO OPEN LOOKUP TABLE. (INT=322)
CAUSE
ACTION
---------------------------------------------------------------------------------------
324 MESSAGE GETDSEG FAILURE CODE = ! WHILE LOADING LOOKUP
TABLE. (INT=324)
CAUSE
ACTION
---------------------------------------------------------------------------------------
326 MESSAGE CLOSE FAILURE ON LOOKUP TABLE. (INT=326)
CAUSE
ACTION
---------------------------------------------------------------------------------------
328 MESSAGE ERROR WHILE WRITING LABEL TO JOBLOG FILE. (INT=328)
CAUSE
ACTION
---------------------------------------------------------------------------------------
329 MESSAGE ERROR WHILE WRITING LABEL TO JOBLOG FILE. (INT=329)
CAUSE
ACTION
---------------------------------------------------------------------------------------
334 MESSAGE THE JOBLOG IS EMPTY. (INT=334)
CAUSE
ACTION
---------------------------------------------------------------------------------------
336 MESSAGE ERROR OPENING LOOKUP TABLE. (INT=336)
CAUSE
ACTION
---------------------------------------------------------------------------------------
337 MESSAGE LOOKUP TABLE IS NOT SPECIFIED IN CONFIGURATION
FILE. (INT=337)
CAUSE
ACTION Make sure the Lookup Table is configured in the
configuration file.
---------------------------------------------------------------------------------------
339 MESSAGE READ ERROR ON LOOKUP TABLE. (INT=339)
CAUSE
ACTION
---------------------------------------------------------------------------------------
345 MESSAGE ERROR OBTAINING WORKSTATION STATUS. (XDS=!)
(INT=345)
CAUSE
ACTION
---------------------------------------------------------------------------------------
346 MESSAGE WORKSTATION IS NOT ACTIVE. REQUEST NOT EXECUTED.
(INT=346)
CAUSE The RELOAD command was issued with the workstation
inactive.
ACTION No action is required.
---------------------------------------------------------------------------------------
351 MESSAGE CONFIGURATION FILE ACCESS ERROR. (CFG=!) (INT=351)
CAUSE
ACTION
---------------------------------------------------------------------------------------
352 MESSAGE FAILED TO OPEN JOBLOG FILE. (INT=352)
CAUSE
ACTION
---------------------------------------------------------------------------------------
353 MESSAGE FAILED TO LOCK JOBLOG FILE. (INT=353)
CAUSE
ACTION
---------------------------------------------------------------------------------------
354 MESSAGE FAILED TO CLOSE JOBLOG FILE. (INT=354)
CAUSE
ACTION
---------------------------------------------------------------------------------------