HP 3000 Manuals HP 3000 Manuals
STATUS
Displays the current status of LU sessions.
Syntax
_____________________________________________________________________________
| |
| STATUS[;W[SID]=Wsid][;LU=LUName[,LUName]...] |
_____________________________________________________________________________
Parameters
Wsid The workstation name. This can be up to eight alphanumeric
characters long; the first character must be alphabetic.
If you omit this parameter, the default workstation identifier
is used. You can specify a default workstation identifier in
the NRJE command.
LUName For NRJE/V, this is the name of the SNA node LU class whose
status you want displayed. (Node classes are configured on the
MPE V SNA Configuration: Classes screen.) For NRJE/XL, this is
the configured LU Name (not the NAU number) of the LU whose
status you want displayed. (LUs are configured on the MPE XL
SNANode Configuration: PU and LU Data screen.)
The name can be up to eight alphanumeric characters long; the
first character must be alphabetic. You can specify a maximum
of five LUNames. If you do not specify any LUNames, the status
is displayed for all LUs configured for the workstation.
Description
This command displays the condition of LU sessions of a workstation. You
can specify a particular workstation by specifying a Wsid. The STATUS
command is intended as a support tool to aid in identifying the state of
each LU for your workstation.
NOTE The output of the STATUS command is in text format, which may vary
somewhat with different releases of NRJE.
Text Reference
NRJELUStatus is the manager intrinsic counterpart of this command; it is
described in the SNA NRJE User/Programmer Reference Manual.