HP 3000 Manuals HP 3000 Manuals
RDRUP
Enables the reader of an NRJE workstation.
Syntax
_____________________________________________________________________________
| |
| RDRU[P] [Wsid] |
_____________________________________________________________________________
Parameter
Wsid The workstation name. This can be up to eight alphanumeric
characters long; the first character must be alphabetic.
If you omit this parameter, the default workstation identifier
is used. You can specify a default workstation identifier in
the NRJE command.
Description
This command enables the reader of an NRJE workstation. Note that a
workstation's reader does not have to be enabled before the workstation
can be started. When RDRDUP is executed successfully, NRJE users can
submit jobs.
This command has the same effect as the MPE console command OPENQ ldev,
where ldev is the logical device number of the NRJE workstation reader.
You can specify a particular workstation by specifying a Wsid.
Text Reference
NRJERdrAccess is the manager intrinsic counterpart of this command; it is
described in the SNA NRJE User/Programmer Reference Manual. Also see
OPENQ in that manual.