HP 3000 Manuals HP 3000 Manuals
NRJECONTROL TRACEOFF
Turns off intrinsic and/or LU tracing for a workstation.
Syntax
_____________________________________________________________________________
| |
| NRJECONTROL TRACEOF[F];W[SID]=Wsid[;TRACE=Type[,Type]] |
_____________________________________________________________________________
Parameters
Wsid Required. The workstation name. This can be up to eight
alphanumeric characters long; the first letter must be
alphabetic. The workstation must have been configured.
Type The type of trace to be stopped:
* INTRINSIC: for commands and intrinsics accessed by NRJE
workstation users and operators.
* LU: for NRJE LU procedures.
If you omit this parameter, all tracing that is on is turned
off.
Description
This command is used to turn off intrinsic and/or LU tracing for all
active LU-LU sessions of a workstation. Tracing is described in Chapter
5 of this manual.
Text Reference
See TRACEOFF later in this chapter. NRJETrace is the manager intrinsic
counterpart of this command; it is described in the SNA NRJE
User/Programmer Reference Manual.