HP 3000 Manuals HP 3000 Manuals
DISPLAY
Provides display of workstation and workstation-related information .
Syntax
___________________________________________________________________________
| |
| D[ISPLAY] [I[NFO]] [;Q[UEUE]] [;WR[ITER]] [;AC[TIVEWS]] [;LUT[ABLE]]|
| [;W[SID]=Wsid] |
___________________________________________________________________________
Parameters
INFO Provides this information:
* Whether your workstation is active or inactive.
* Which Job Entry System the host uses.
* The name of the remote workstation.
* The host command prefix character.
* The host console commands allowed for users without NM
capability.
* The Lookup Table file name in effect for the workstation.
* The standard print form in effect for the workstation.
* The standard punch form in effect for the workstation.
* The text of the NRJE welcome message.
QUEUE Provides information about transmission from a workstation:
* The logical device number (ldev) of the spooled reader for this
workstation.
* The chain size, in RUs, configured for the reader of this
workstation.
* The number of readers.
* The compression indicator configured for this workstation. You
might need to know this when you submit a job.
* The translation indicator configured for this workstation. You
might need to know this when you submit a job.
* The status of the workstation reader.
* The value of the reader outfence. You might need to know this
when you use the PRIORITY parameter of the SUBMIT command.
* The system OutFence value.
WRITER Displays information about each logical writer configured for this
workstation:
* Name of the writer.
* Logical device number (ldev), logical device class names, or
'formid' entry in the Lookup Table.
* The FORCED flag value: forces the formid to use the default
output destination when output is routed to the writer and
alternative routing is not specified in SUBMIT command. Will be
Y or N.
* Output priority.
* Translation code.
ACTIVEWS Provides a list of all active NRJE workstations on your HP 3000.
LUTABLE Displays information about each logical unit:
* Logical unit name. An asterisk (*) beside a logical unit name
indicates that it is active.
* Chain size: the number of RUs sent to the host before requesting
a positive response.
* Logical unit address.
* Auto-start flag.
Wsid Overrides the default workstation named in your NRJE command. All
information received is for workstation Wsid. Subsequent commands
are not affected.
Description
The DISPLAY command enables you to obtain a broad range of information
about NRJE workstations . You can obtain information about transmission
queues , logical writers , and active workstations.
If you enter this command without any parameters, NRJE displays all the
information possible about the default workstation. If you enter a
DISPLAY command with only a Wsid parameter, NRJE displays all the
information possible about the workstation specified in that parameter.
The Wsid parameter overrides a default workstation established earlier in
an NRJE command. As the following examples show, you can vary the output
from the DISPLAY command, depending on the parameters that you enter.
When you enter DISPLAY INFO, or DISPLAY without any parameters, the State
of a workstation is one of those described in Table 3-2.
The information that DISPLAY provides is presented one screen at a time
if the command is issued from an interactive session.
Table 3-2. Workstation States
------------------------------------------------------------------------------------------
| |
| State: Meaning: |
| |
| ACTIVE The workstation is connected to the host job entry |
| subsystem. |
| |
| STOPPEND * One of these has been issued and is pending: |
| |
| |
| * An NRJE subsystem STOPWS command. |
| |
| * An NRJE subsystem NRJEStopWS intrinsic call in stop |
| mode. |
| |
| * One of these MPE commands: |
| |
| |
| NRJECONTROL STOP ... |
| SNACONTROL STOP ... ; TYPE=Q |
| |
| SHUTPEND * One of these has been issued and is pending: |
| |
| |
| * An NRJE subsystem HALT command. |
| |
| * An NRJE subsystem NRJEStopWS intrinsic call in halt |
| mode. |
| |
| * The MPE command SNACONTROL STOP...; TYPE=P |
| |
------------------------------------------------------------------------------------------
* This is a highly transient state.
Table 3-2. Workstation States (cont.)
------------------------------------------------------------------------------------------
| |
| State: Meaning: |
| |
| MONPEND The NRJE monitor process has been activated, but the LUs are |
| not yet active. |
| |
| PENDING * The NRJE monitor process has not yet been activated. |
| |
| INACTIVE The NRJE monitor process has not been created, and no |
| STARTWS NRJE subsystem command, NRJEStartWS intrinsic call, |
| or NRJECONTROL START MPE command has been issued. |
| |
------------------------------------------------------------------------------------------
* This is a highly transient state.
Example
_____________________________________________________________________________
| |
| R19>DISPLAY |
| |
| Workstation: R19 |
| GENERAL INFORMATION |
| State: Pending |
| Jes: JES2 |
| Remote: RMT19 |
| Host command prefix char: $ |
| Allowed console commands: $D |
| Formid lookup table: NRJETABL.NRJE |
| Default print form name: STD |
| Default punch form name: STD |
| |
| WELCOME MESSAGE: |
| ********************************* |
| * Welcome to NRJE * |
| ********************************* |
| |
| READER QUEUE |
| Reader ldev: 12 |
| Chain size: 20 |
| Number of Readers: 1 |
| Compression: YES |
| Translation code: 0: NATIVE-3000 |
| Reader status: UP |
| Reader fence: 1 |
| System fence: 1 |
| |
| WORKSTATION LU LIST |
| LU Name Chain Size LU Address Auto Start |
| |
| LU01 20 0 YES |
| LU02 20 0 YES |
| LU03 20 0 YES |
| LU04 20 0 NO |
| LU05 20 0 NO |
| LU06 20 0 NO |
| LU07 20 0 NO |
| LU08 20 0 NO |
_____________________________________________________________________________
__________________________________________________________________________________
| |
| LOGICAL WRITER |
| Writer Name Output Destination Forced Priority Translation Code|
| |
| PR1 LP NO 8 0: NATIVE-3000 |
| PR2 EPOC NO 8 0: NATIVE-3000 |
| PR3 'FORM1' NO 8 0: NATIVE-3000 |
| PR4 LP NO 8 0: NATIVE-3000 |
| PU1 'FORM2' YES 8 0: NATIVE-3000 |
| PU2 EPOC NO 8 0: NATIVE-3000 |
| |
| |
| NO WORKSTATION IS ACTIVE. (CI=806) |
| |
| R19> |
__________________________________________________________________________________
Text Reference
The intrinsics related to this command are described in Chapter 5, "User
Intrinsics." These are as follows:
* NRJEQueue: obtains information about the workstation transmission
queue.
* NRJEWSInfo: obtains general information about the workstation.
* NRJEWriter: obtains information about configured host logical
writers for a given workstation.
* NRJEActiveWS: finds out how many and which NRJE workstations are
active.
* NRJEWelcome: receives the NRJE welcome message.
* NRJELUList: provides a list of all LUs and related characteristics
for a workstation.